Fanvil i55A&i55A-Z Indoor Station Installation Guide
- October 27, 2023
- Fanvil
Table of Contents
i55A &i55A-Z&i57A&i57A-Z
Indoor Station
Quick Installation Guide
Package Contents
Physical specification
| Model | Device Dimension |
|---|---|
| i55A&i55A-Z | 21712421 (mm) |
| i57A&i57A-Z | 29518124 (mm) |
Product appearance description
-
Panel
a) i55A&i55A-Z
b) i57A&i57A-Z
-
Interface description
There are some interfaces on the back of the device for connecting power supply, alarms etc.
The connections are as follows:
No.| Description| Interface
---|---|---
1| Power interface: 12V/1A input.|
2| Ethernet interface: standard RJ45 interface, 10/100M adaptive, it is recommended to use CAT5 or CAT5E network cable.|
3-1| 2 sets of short-circuit output interfaces: corresponding to the short- circuit input interface, login device webpage settings, can be connected to electric locks, alarms etc.|
3-2| 1 sets of doorbell interfaces.|
3-3| 1 sets of RS485 interfaces.|
4| Power interface: 12V/1A input.|
5| 8 sets of alarm input interfaces: input devices for connecting switches, infrared sensor, door sensor, vibration sensors etc.| -
External device connection diagram
Installation Diagram
Model 1: Wall-mounted Installation
(CN:86 embedded box,US: single gang &Dual gang, EUR:80 embedded box)
Step 1: Install wall bracket
Without 86 embedded box in the wall
A. Mark two fixation holes positions on the wall with the wall bracket.
B. Take down the bracket, using an electric drill to make the two fixation
holes on the wall, then insert the two screw fixing seats provided.
C. Fix the wall bracket on the wall with two TA430 screws.
With 86 embedded box in the wall
A. Fix the wall bracket on the 86 embedded box with two PM416 screws.
Step 2: Connect peripherals
A. If you need to connect other input and output devices, please connect to
the host through the cable.
Step 3: Power on the device
If it is working properly, align the slot on the rear side of the panel with
the pin on the wall bracket and slide the host down to complete the
installation.
IP Indoor Unit Setting
Step 1: Log in the web setting page of Indoor Unit
Input IP address of indoor unit (e.g. http:// 172.18.90.14) into the address
bar of PC’s web browser.
The default user name and password are both admin.
Step 2: Add the SIP account
Set SIP server address, port, user name, password and SIP user with assigned
SIP account parameters.
Select “Activate”, and then click Apply to save this setting.
Step 3: Feature Setting
Step 4: Unlock Setting
Application—Doorphone Settings—Add—OK.
Title: Doorphone mode.
Number: The SIP account of Doorphone.
Line: The SIP line of Indoor Unit.
Access codec: Consistent with the access code in doorphone access table
(The i57A-Z as calling party).
Password: Same as open the doorphone’s password (The i57A-Z as called
party).
Local Operation
6.1 Answer/hang up calls
When the doorphone calls the indoor unit, click the button to answer the call,
and click the button to hang up the call.
6.2 Unlock the door
During the call of indoor unit and doorphone, click the button to unlock the
door.
6.3 Turn on/off the monitoring
Click the button on the indoor unit to check the monitoring screen, and click
the button to exit. (Only support for the communication with video doorphone)
6.4 Volume adjustment
When the indoor unit is talking to other devices like doorphone, click the
button to increase the volume, and click the button to decrease the volume.
Fanvil Technology Co., Ltd
Website: www.fanvil.com
EMail: sales@fanvil.com
support@fanvil.com
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>