Ninebot S Instruction Manual
- June 2, 2024
- Segway
Table of Contents
Welcome
Thanks for choosing the ninebot S!
To enjoy the many features of your Ninebot S you must read and follow these
instructions
Enjoy your ride!
1 Riding Safety
-
The Ninebot S is a recreational product. Before mastering riding skills. you need to practice. Neither Ninebot (means Ninebot (Belling) Tech Co.. Ltd. and its subsidiaries and affiliates) nor Segway Inc. is responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this document.
-
Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the Ninebot S you risk injury or death from loss of control. collisions. and falls. When entering into public spaces always comply with the local laws and regulations. As with other vehicles. faster speeds require longer braking distance. Sudden braking on smooth surfaces could lead to wheel slip. loss of balance. or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.
-
Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place. and provides protection for the back of your head.
-
Do not attempt your first ride in any area where you might encounter children. pedestrians. pets. vehicles. bicycles. or other obstacles and potential hazards.
-
Respect pedestrians by always yielding the right of way. When approaching a pedestrian from the front. stay to the right and slow down. Avoid startling pedestrians. When approaching from behind. announce yourself and slow down to walking speed when passing. Pass on the left whenever possible. Please obey local traffic laws and regulations.
-
In places without laws and regulations governing self-balancing electric vehicles. comply with the safety guidelines outlined in this manual. Neither Ninebot nor Segway Inc. is responsible for any property damage, personal injury/death. accidents. or legal disputes caused by violations of the safety instructions.
-
Do not allow anyone to ride your Ninebot Son his/her own unless he/she has carefully read this manual. watched the safety video. and followed the New Rider Tutorial on the Segway-Ninebot App. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the Ninebot S. Make sure each new rider wears a helmet and other protective gear.
-
Before each ride check for loose fasteners. damaged components. and low tire pressure. If the Ninebot S makes abnormal sounds or signals an alarm. immediately stop riding. Diagnose your Ninebot S via the Segway-Ninebot App and call your dealer/distributor for service.
-
Be alert! Scan both far ahead and in front of your Ninebot S — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including. but not limited to. wet ground. loose sand. loose gravel. and ice).
-
To reduce risk of injury. you must read and follow all ‘CAUTION” and “WARNING” notices in this document. Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders be 16+ years old. Always follow these safety instructions:
A. People who should not ride the Ninebot $ include:
i. Anyone under the influence of alcohol or drugs.
ii. Anyone who suffers from disease that puts them at risk if they engage in strenuous physical activity.
iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.
iv. Anyone whose height or weight is outside the stated limits (see Specifications).
v. Pregnant women.
B. Riders under the age of 16 years old should ride under adult supervision.
C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws. 0. To ride safely. you must be able to clearly see what is in front of you and you must be clearly visible to others.
E. Do not ride in the snow. in the rain. or on roads which are wet. muddy. icy. or that are slippery for any reason. Do not ride over obstacles (sand. loose gravel. or sticks). Doing so could result in a loss of balance or traction and could cause a fall.
F. Do not accelerate or decelerate suddenly. Do not accelerate when the Ninebot S tilts back or sounds an alarm. Do not attempt to override the speed limiter. -
Oo not attempt to charge your Ninebot S if it. the charger. or the power outlet is wet.
-
As with any electronic device. use a surge protector when charging to help protect your Ninebot S from damage due to power surges and voltage spikes. Only use the Ninebot supplied charger. Do not use a charger from any other product.
-
Use only Ninebot or Ninebot approved parts and accessories. Do not modify your Ninebot S. Modifications to your Ninebot S could interfere with the operation of the Ninebot S. could result in serious injury and/or damage, and could void the Limited Warranty.
-
Oo not sit on the steering bar. Doing so could result in serious injury and/or damage to your Ninebot S.
2 Packing List
When unpacking your Ninebot S. please verify that the above items are included
in the package. If you are missing any components. please contact your
dealer/distributor or email technicalsupportCsegway.com.
After verifying that all components are present and in good condition, you can
assemble your new Ninebot S.
Please retain the box and packaging materials in case you need to ship your
Ninebot Sin the future.
Remember to power oft your Ninebot S and unplug the charge cable before
assembling, mounting accessories, or cleaning the mainframe.
3 Diagram
Power Botton – Turn ON/OFF. The Ninebot S will automatically power OFF when
idle for 10 minutes. or when laid down (horizontal) for over 30 seconds,
Lock – Enable Lock Mode via the App. The Ninebot S will vibrate. flash its
lights. and sound an alarm if anyone moves it. The App will also alarm. The
Ninebot Swill not balance in Lock Mode.
Bluetooth – When Bluetooth is enabled but not COnneCted tea smart phone,
this icon will blink. When the Segway-Ninebot App is connected to the Ninebot
S. this icon will glow steadily.
Speed Limit – Enable and adjust Speed Limit Mode via the App. When the icon is
illuminated the Ninebot S is limited to 4.3 mph (7 km/h). This speed limit can
be adjusted in the App. As you approach the speed limit the Ninebot S tilts
batk
Power Level – Indicates the remaining battery life. When the battery is neatly
empty this icon blinks and the Ninebot S beeps. indicating that you need to
charge your Ninebot S. When less than 30%. your Ninebot Swill gradually reduce
the max speed lint. Use the App to read the remaining power and estimated
remaining range.
4 Assembling
-
Insert the steering bar into the steering socket at the back of the mainframe.
-
Install the two screws. Tighten securely with the included hex wrench.
-
Snap the lid securely with hearing the sound of “click”.
Check the Power ON/OFF status after assembly.
For your safety, your Ninebot S is not activated at this time and will beep occasionally after Power ON. Until activated, the Ninebot S maintains a very low riding speed and steering sensitivity, and should not be ridden. Install the Segway-Ninebot App on your mobile device (with Bluetooth 4.2 or above). connect to the Ninebot S with Bluetooth, and follow the App instructions to activate your Ninebot S and follow the training procedures.
5 Charging
Do not connect the charger if the charge port or charge cable is wet. The battery pack is only to be charged by adults.
6 First Ride
There are safety risks when learning to ride the Ninebot S. You must read the
Safety Instructions and follow the New Rider Tutorial in the App before your
first ride.
For your safety, your Ninebot S is not activated at this time and will beep
occasionally after Power ON. Until activated. the Ninebot S maintains a very
low riding speed and steering sensitivity, and should not be ridden. Install
the App on your mobile device (with Bluetooth 4.2 or above). connect to the
Ninebot S with Bluetooth. and follow the App instructions to activate your
Ninebot S and follow the training procedures.
Scan the QR code to download the App (00S 8.0 or above, Android”‘ 4.3 or
above).
-
Install app and register/login.
-
Power ON the Ninebot S. The Bluetooth icon blinking indicates theNinebot S is waiting for a connection.
-
In the APP click Vehicle, scan and select your Ninebot S. The Ninebot S will beep when the connection is successful. The Bluetooth icon will Stop Blinking and remain illuminated.
7 Learning to Ride
WARNING
Rider must weight 88-220 lbs (40-100 kb)
and must be 4’3″ (130-200 cm) tall.
Wear an approved helmet and other protective gear to minimize any possible injury.
After activation, the App will lead you through the new Rider Tutorial, Please follow the instructions in the App and in this manual.
NOTE: You must first download the Segway-Ninebot App on your mobile device.
The App will lead you through the New Rider Tutorial.
For your Safety, the Ninebot S will limit the max speed to 4.3 mph (7 km/h)
until you complete the New Rider Tutorial. for the first 0.6 miles (1km) after
completing the New Rider Tutorial, the max speed will be limited to 6.2 mph
(10 km/h). after which you can disable the speed limiter via the App and reach
a maximum speed of 10 mph (16 km/h).
8 Warnings
You must read and understand the Warnings and safe riding instructions in this manual before attempting to ride the Ninebot S. Failure to follow these warnings could result in death or serious injury due to: loss of balance, traction, and/or control; collisions; and falls.
Warnings
You must read and understand the warnings and Safe Riding instructions in this
manual before attempting to ride the Ninebot S.
9 Lifting and Power Assist Mode
10 Maintenance
Cleaning and Storing Your Ninebot S
Use a soft. wet cloth to wipe the mainframe clean. Hard to remove dirt can be
scrubbed with a toothbrush and toothpaste. then cleaned with a soft, wet
cloth.
NOTE
The IP Rating of the mainframe is P54. IP Rating of the battery pack is IPX6.
Do not wash your Ninebot S with alcohol. gasoline. acetone. or other
corrosive/volatile solvents. These substances may damage the appearance and
internal structure of your Ninebot S. Do not wash your Ninebot S with a power
washer or high-pressure hose.
AWARNING
Prolonged exposure to UV rays. rains and the elements may damage the enclosure
materials. store indoors when not in use or during charging. Make sure the
Ninebot S is powered OFF. the charging cable is unplugged. and the rubber cap
on the charge port is tightly sealed before cleaning: otherwise, you may
expose yourself to electric shock or damage the electronic components. Store
your Ninebot Sin a cool. dry place. Do not store it outdoors for extended
periods of time. Exposure to sunlight and temperature extremes (both hot and
cold) will accelerate the aging process of the plastic components and may
reduce battery life.
Battery Pack Maintenance
Do not store or charge the battery at temperatures outside the stated limits
(see Specifications). Do not expose the battery to fire. Do not discard or
destroy the battery. Refer to your local laws and regulations regarding
battery recycling and/or disposal.
A well-maintained battery can perform well even after many miles of riding.
Charge the battery to alter each ride and avoid draining the battery
completely. When used at room temperature (70°F [22°C]) the battery range and
performance is at its best: whereas using it at temperatures below 32°F (0°C)
can decrease range and performance. Typically. at -4°F (-20°C) range can be
half that of the same battery at 70°F (22°C). Battery range will recover when
the temperature rises.
NOTE
Typically, a fully charged battery should retain charge for 120-180 days in
Standby Mode. Remember to charge the battery after each use. Completely
draining the battery may cause permanent damage to the battery. Electronics
inside the battery record the charge-discharge condition of the battery:
damage caused by over-charging or under-charging will not be covered by the
Limited Warranty.
****AWARNING
Do not attempt to disassemble the battery. Risk of fire. No user serviceable
parts. (Risque d’incendie. II n’y a pas d’elements pouvant etre repares par
l’utilisateur.)
**AWARNING
Do not ride when the ambient temperature is outside the machine operation
temperature(see Specifications) because low/high temperature will limit the
maximum power/torque. Doing so could cause personal injury or property damage
due to slips or falls.
Recommended tire pressure
15 Inflate tires to 45-50 psi. Inflate both tires equally.
**
11 Specifications
(1) Vehicle height: Tiro distance from the ground to the highest point of the
vehicle body.
(2) Typical range: Tested Mule riding under lull power. 154 lbs (70 kg) load.
77°F (25°C). Si mph (15 km/h) average speed on pavement.
(3)Continuous Discharge Power: Tested while under lull power at 77°F (25°C).
The value changes with temperature and remaining battery capacity.
For example. the continuous discharge power drops to ~80%0 the maximum value
at 10% remaining battery. capacity. and the continuous,’ discharge power drops
to -70%ot the maxim-In value at 32°F (0°C).
Note: The tide symbol (~) indicates that the following number es an
approximation.
12 Trademark & Legal Statement
Ninebot is registered trademark of Ninebot (Tianjin) Tech. Co., Ltd; Ninebot S
is trademark of Ninebot (Tianjin) Tech. Co., Ltd; Segway is registered
trademark of Segway Inc; Apple and Apple logo are registered trademark of
Apple Inc in the United States and elsewhere. App Store is service mark of
Apple Inc: Android is trademark of Google Inc. Android robots was originally
created by Google Inc; The respective owners reserve the rights of their
trademarks referred to in this manual.
The Ninebot S is covered by relevant patents. For patent information go to
http://www.segway.com.
We have attempted to include descriptions and instructions for all the
functions of the Ninebot S at the time of printing. However, your Ninebot S
may differ slightly from the one shown in this document. Please note that
there are multiple Ninebot models with different functions. and some of the
functions mentioned herein may not be applicable to your unit. The
manufacturer reserves the right to change the design and functionality of the
Ninebot S product and documentation without prior notice.
© 2018 Ninebot (Beijing) Tech Co., Ltd. All rights reserved.
13 Certifications
Ninebot S N3M240
— UL2272
— FCC part 15 subparts B and C
Batteries
— UL2271
— UN/DOT 38.3
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates. uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception. which can be determined by
turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference. and (2) this device must accept any interference,
includingin¬terference that may cause undesired operation of the device.
CAN ICES-3 (13)/NMB-3(B)
Ninebot is not responsible for any changes or modifications not expressly
approved by Ninebot. Such modifications could void the user’s authority to
operate the equipment.
FCCID:2AF28-NB
IC:20915-NB01
Model Number: N3M240
14 Contact
Contact us if you experience issues relating to riding. maintenance and
safety. or errors/faults with your Ninebot S.
Segway Inc.
14 Technology Drive. Bedford. NH 03110. USA
Tel: 1-603-222-6000 Fax:
1-603-222-6001 Toll Free:
1-866-473-4929 E
-mail Sales: customeroperation@segway.com
E-mail Service: technicalsupport@segway.com
Website: www.segway.com
Have your Ninebot S’s serial number on hand when contacting Segway. You can
find your serial number on the bottom of your Ninebot S.
Ninebot S Instruction Manual – Optimized PDF
Ninebot S Instruction Manual – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>