MINISO Q66 TWS Wireless Earphones User Manual

MINISO Q66 TWS Wireless Earphones User Manual

Important Safety Notes

1. Before using this product. read this manual carefully and keep it properly for future reference.
2. Do not use this product for a prolonged time to avoid affecting hearing.
3. Do not use this product when driving.
4. Do not play music at an extra large voice.
5. Please use this product according to the local laws and regulations.
6. Please keep it thy when the product is not used.
7. Only the earphones are waterproof, not the charging case. Keep the charging case thy when using it.
8. Containing rechargeable battery. this product cannot be dismantled, altered or replaced by yourself. Do not expose it to sunlight or fire sources.
9. Do not dispose of electrical appliances as unsorted municipal waste. use separate collection facilities. Contact your local government for Information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Product and Accessories

1. Multi functional button MFB button
2. LED indicator light of Earphones
3. Microphone radio receiving hole
4. Earphone rubber cap
5. LED indicator light of charging case
6. Charging contact point
7. Micro USB charging port
8. Lanyard hole
9. Charging cable

Specification

Usage Instructions

1.   Wearing Earphones Take the earphones out of the charging case and wear them on your ears according to UR mark.

2. Pairing After taking the earphones out of the charging case, the earphones will automatically turn on and enter pawing mode and the LED Indicator light will turn red and blue alternatively. with a ‘power on” prompt. Activate ST function on the phone and search MINISO-066 to dick for ST connection. LEO Indicator light will flash blue upon completion of pairing, with a “connected” prompt.
   Note: This product supports auto reconnecting function and may connect with the device connected the previous time after turned on.

3. Turning off

4. When turned on. hold the NIPS for about 6s to turn it off. with a ‘power off’ prompt.

5. Put the earphones back to the charging case. The earphones will automatically turn off and be charged in the charging case.

6. Charging

7. Charging the charging case
   After connecting the charging cable and the compatible DC power adapter, plug the other end of the cable into the port of the charging case in order to charge it. LEO indicator light will flash white during charging and will stay white after fully charged.

8. Charging earphones
   Put the earphones In the charging case to ensure the charging contact point of the earphones gets in contact with the top pin Inside the charging case so that the earphones will be charged.

Function/Operation of Earphones

Sin. Click MFB once again to turn off Sin.
Low power prompt| Prompt will be heard when voltage reaches 3.3V.
Power off under low power| Earphones will be power off upon a prompt when voltage
Clear away pairing info.| When turned on, dick MFB three times consecutively when BT is paired, the records of the paired device will be cleared away.

Product Name : IPX7 Grade Waterproof TWS Wireless Earphones Model: 1166 (Black)

Specifications: Earphones: 20x20x24mm; Charging case: 66x30x3Omm: Sensitivity: 941203: Impedance: 160; Input: DC5V. 1k Black

Product Features : BT 5.1 chip supports auto pairing. Touch control. supports phone call. Earphones are IPX7 grade waterproof. suitable for being used in various environments.

Material: ABS
Usage: Refer to User Manual
Caution:

1. Do not use it for a prolonged tine to avoid affecting hearing.
2. Do not use it when driving.
3. Do not play music at an extra large voice.
4. The packaging contains important information and should be kept.
5. Please use the product according to the local laws and regulations.
6. Only the earphones are waterproof. not the charging case. Keep the charging case dry when using it.
   Storage: Store in a dry and cool place.

FCC warning

This device complies with Pal 15 of the FCC Rules. Operetta is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, inducing interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment Into an cutlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>