hama 00223192 Power Strip Instruction Manual

Table of Contents

Mains Connection: 250 V ~ / 16 A max. 3680 W
Brand Name, Commercial Register Number, Address: Hama, HRA12159, Dresdner Str. 9, 86653 Monheim, Germany
Model Identifier: 00223192
Input Voltage: 230 V
Input AC Frequency: 50 Hz
Output voltage / output current / power output:
- Typ-C1: 5,0V-20,0V; 3,0A-5,0A; 15,0W-100,0W
- Typ-C2: 5,0V-20,0V; 3,0A-5,0A; 15,0W-100,0W
- USB A: 5,0V-12,0V; 1,5A-3,0A; 15,0W-18,0W
- Typ-C1 + Typ-C2:
- USB C1: 5,0V-20,0V; 3,0A-3,25A; 15,0W-65,0W
- USB C2: 5,0V-20,0V; 1.75A-3,0A; 15,0W-35,0W
- Typ-C1 + USB A:
- USB C1: 5,0V-20,0V; 3A-4,0A; 15,0W-80,0W
- USB A: 5,0V-12,0V; 1,5A-3,0A; 15,0W-18,0W
- Typ-C2 + USB A:
- USB C2: 5,0V-20,0V; 3A-3,25A; 15,0W-65,0W
- USB A: 5,0V-12,0V; 1,5A-3,0A; 15,0W-18,0W
- Tpy-C1 + Tpy-C2 + USB A:
- USB C1: 5,0V-20,0V; 2,25A-3,0A; 15,0W-45,0W
- USB C2: 5,0V-20,0V; 1,75-3,0A; 15,0W-35,0W
- USB A: 5,0V-12,0V; 1,5A-3,0A; 15,0W-18,0W
- Total: 100,0W
Average efficiency during operation: 86,0%
Efficiency at low load (10%): 76,0%
Power consumption at zero load: 0,30 W

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in aside place for future reference.

Risk of electric shock

This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage.

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

Use the product only for the intended purpose.
Denote operate the product outside the power limits specified in the technical data.
Protect the product from dirt, moisture and overheating and use it in dry environments only.
Don’t use the product in damp environment and avoid splashing water.
Don’t continue to operate the product if it is visibly damaged.
Donor bend or crush the cable.
Donor drop the product endknot exposits any major shocks.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
As with all electrical products, this device should be kept out of the reach of children.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Donor modify the product in any way. Doing so voids the warranty.
The product is intended for private, non-commercial use only.
The product is intended only for use inside buildings.
Donor use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Only use the article under moderate climatic conditions.
Do not use the product in areas in which electronic products aren’t permitted.
Route allocable so that there is no risk of tripping.
Never connect multiple units of this product in series.
The product must only be operated on supply network as described on the type plate.

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the AC adapter ,the adapter cable or the mains cable are damaged.
Do not attempt to service or repair the product your self. Leave any and all service work to qualified experts.

Warning

Only operate the product from socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch if this is not available, unplug the power cord from the socket.
If using amulet-socket power strip, make sure that the total power consumption of all connected devices does noticed the power strip’s maximum throughput rating.
If you walnut be using the product for a prolonged period, disconnect it from mains power.

Warning – Connection of devices

Before reconnecting advice, check whether it can be adequately supplied with the charger’s current delivery.
Ensure that the total output of althea connected devices does not exceed 65 W.
Note the instructions in your device’s operating manual

Note -Power Delivery

Note -Power Delivery

BE aware that, for efficient and optimized charging, your terminal device must support the PD (Power Delivery) function.
If you have allergen number of PD-enabled devices with different firm are updates ,it may be that the function is not fully supported.
The USB charging sockets are permanently operated and are independent of the switch.
Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:
Connect your device to a USB charging port using suitable USB cable.
Connect the charger to properly installed and easily accessible mains socket.
The charging process is displayed on your device.
Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
Then disconnect the charger from the line connection.

Note

Disconnect the device from the mains before cleaning and during prolonged periods of non-use.
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Ensure that no water is able to enter the product.

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Mains connection	250 V~/ 16A
Connected load	max. 3680 W

Specifications according to Regulation (EU) 2019/1782

Brand name,| Hama, HRA12159,
commercial| Dresdner Str. 9,
register number,| 86653 Monheim,
address| Germany

Model identifier	00223192
Input voltage	230 V
Input AC frequency	50 Hz
Output voltage / output current / power output

Typ-C1: 5,0V-20,0V;
3,0A-5,0A;
15,0W-100,0W
Typ-C2: 5,0V-20,0V; 3,0A-5,0A; 15,0W-100,0W
USB A:
5,0V-12,0V; 1,5A-3,0A; 15,0W-18,0W
Typ-C1 + Typ-C2:
USB C1: 5,0V-20,0V;
3,0A-3,25A;
15,0W-65,0W
USB C2: 5,0V-20,0V;
1.75A-3,0A;
15,0W-35,0W
Typ-C1 + USB A:
USB C1: 5,0V-20,0V;
3A-4,0A; 15,0W-80,0W
USB A: 5,0V-12,0V;
1,5A-3,0A; 15,0W-18,0W
Typ-C2 + USB A:
USB C1: 5,0V-20,0V;
3A-3,25A; 15,0W-65,0W
USB A: 5,0V-12,0V;
1,5A-3,0A;
15,0W-18,0W
Tpy-C1 + Tpy-C2 + USB A:
USB C1: 5,0V-20,0V;
2,25A-3,0A;
15,0W-45,0W
USB C2: 5,0V-20,0V;
1,75-3,0A; 15,0W-35,0W
USB A: 5,0V-12,0V;
1,5A-3,0A;
15,0W-18,0W