SEGWAY GT2 Scooter Fast Electric Instruction Manual
- June 2, 2024
- Segway
Table of Contents
SEGWAY GT2 Scooter Fast Electric
Specifications
- Model: Segway-Ninebot KickScooter
- Manufacturer: Segway
- Weight Capacity: Up to 220 lbs (100 kg)
- Maximum Speed: 15.5 mph (25 km/h)
- Range: Up to 15.5 miles (25 km)
Product Usage Instructions
Installation and Setup
- Scan the QR code to download the Segway-Ninebot app.
- Visit the website www.segway.com or use the Segway-Ninebot app to access the latest user materials.
- Install the app, activate your KickScooter, and obtain the latest updates and safety regulations.
Handlebar Functions
- Power Button: Press to power on/off the scooter. Hold to power off. Also used for screen wake-up, mode switching, and confirming Bluetooth passwords.
- Left Control Switch: Controls headlight, cruise mode, and mode switching for GT2 models.
- Right Control Switch: Activates BOOST mode for GT2, switches to WALK mode and controls speed modes.
- Throttle: Twist to speed up the scooter.
- Turn Signal Button: Controls left/right turn signals.
FAQ
How do I power on/off the scooter?
Press the Power Button to turn on the scooter and hold it to power off.
How do I activate BOOST mode?
Press the Right Control Switch to activate BOOST mode for GT2 models in RACE mode.
How do I switch between speed modes?
Rotate the Left Control Switch to switch between speed modes when the scooter is at a complete stop.
Diagram
Handlebar Functions
Dashboard
Speed Modes Introduction
Damper Adjustment
- S (Slow rebound): Increase rebound resistance by rotating the Adjustment Knob clockwise.
- F (Fast rebound): Decrease rebound resistance by rotating the Adjustment Knob counterclockwise.
- Note: The damper is set to the default position before leaving the factory. Please follow the steps above to adjust it according to your riding habits.
Specifications
| Item | Parameter | |
|---|---|---|
| Product | Name | Segway SuperScooter GT1 |
| Model | GT1E | GT2P |
| Length × Width × Height | Approx. 58.5 × 25.8 × 51.5 in (1485 × 656 × 1308 mm) | |
| Folded: Length × Width × Height | Approx. 58.5 × 25.8 × 33.9 in (1485 × 656 × |
860 mm)
Net Weight| Approx. 47.6 kg (105 lbs)| Approx. 52.6 kg (116 lbs)
Rider| Max. Payload| 150 kg (331 lbs)
Recommended Age| 14–60 years old
Required Height| 3’11”–6’6”(120–200 cm)
Machine| Wheelbase| 45.2 in (1147 mm)
Ground Clearance| 5.5 in (140 mm)
Drive System| 1WD (One-wheel drive)| 2WD (Two-wheel drive)
Max. Speed| Approx. 15.5 mph (25 km/h)| Approx. 43.5 mph (70 km/h )
Theoretical Range[1]| Approx. 43.5 miles (70 km)| Approx. 55.9 miles (90 km)
Typical Range[2]| N/A| Approx. 37.3 miles (60 km)
Max. Slope| Approx. 23%| Approx. 30%
Traversable Terrain| Asphalt/flat pavement; obstacles < 1.2 in (3 cm); gaps <
1.2 in (3 cm)
Operating Temperature| -10 to 40°C (14 to 104°F)
Storage Temperature| -20 to 45°C (-4 to 113°F)
IP Rating| IPX4
Duration of Charging (single)[3]| Approx. 12 h| Approx. 16 h
Duration of Charging (dual)[3]| Approx. 6 h| Approx. 8 h
Battery| Model| NDAF5020A| NDAF5030A
Nominal Voltage| 50.4 V
Max. Charging Voltage| 58.8 V
Nominal Energy| 1008 Wh| 1512 Wh
Nominal Capacity| 20 Ah| 30 Ah
Charging Ambient Temperature| 0 to 40°C (32 to 104°F )
Battery Management System| Over-heating, short circuit, over-current, over-
discharge, and over-charge protection
Motor| Motor Type| Air-cooled hub motor
Nominal Power| 0.5 kW, 500 W| 1.5 kW2, 1500 W2
Max. Power| 1.5 kW, 1500 W| 3 kW2, 3000 W2
| Item| Parameter
---|---|---
Charger| Model| NBW58D802D0D
Input Voltage| 100–240 V~
Max. Output Voltage| 58.8 V
Output Power| 0.1 kW, 115.6 W
Rated Output| 57.8 V 2.0 A
Tire| Type| 11-inch Self-sealing tubeless tires
Tire Pressure| 32 psi
Material| Rubber
Others| Speed Modes| WALK mode, PARK mode, ECO mode, SPORT mode and RACE mode
Suspension System| Front and rear spring suspension
Front and rear adjustable damper
Brake System| Front & Rear disc brakes
Bluetooth| Frequency Band(s)| 2.4000–2.4835 GHz
Max.RF Power| 20 mW
- Theoretical Range: tested while riding with a full battery, 75 kg (165 lbs) load, 25°C (77°F), at the speed of 12.4 mph (20 km/h) on average on pavement.
- Typical Range: tested while riding with a full battery, 75 kg (165 lbs) load, 25°C (77°F), at the speed of 24.9 mph (40 km/h) on average on pavement.
- Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
- Single charging: rated input current up to 2 Amps when charging with a single charger.
- Dual charging: rated input current up to 4 Amps when charging with two chargers specified by the manufacturer.
Common Failures and Solutions
| Error code | Possible causes | Solution |
|---|---|---|
| 0 | Throttle abnormality | Please contact after-sales service or an authorized |
dealer.
1| Dashboard communication failure
2| Battery communication failure
3| Turn signals abnormality
4| Headlight abnormality
5| Water dectection in stem top
6| Over-voltage protection of motor controller
7| Under-voltage protection of battery/motor controller|
Please try to charge the scooter.
8| High scooter temperature| Please try to apply heat dissipation for the
scooter.
9| High battery temperature| Please try to apply heat dissipation for the
scooter.
10| Low battery temperature| Please try to warm up the scooter.
11| High front-drive-wheel temperature| Please try to apply heat dissipation
for the front-drive-wheel.
12| Front-drive-wheel stall| Please restart the scooter and try again.
13| Front-drive-wheel current sensor error| Please contact after-sales service
or an authorized dealer.
14| Front-drive-wheel over-current| Please restart the scooter and try again.
15| Front-drive-wheel motor phase failure| Please contact after-sales service
or an authorized dealer.
16| High rear-drive-wheel temperature| Please try to apply heat dissipation
for the rear-drive-wheel.
17| Rear-drive-wheel stall| Please restart the scooter and try again.
18| Rear-drive-wheel current sensor error| Please contact after-sales service
or an authorized dealer.
19| Rear-drive-wheel over-current| Please restart the scooter and try again.
20| Rear-drive-wheel motor phase failure| Please contact after-sales service
or an authorized dealer.
21| Rear motor hall sensor error
22| Front motor hall sensor error
Certifications
- This product is certified to ANSI/CAN/UL-2272 by CSA Group.
- The battery complies with UN/DOT 38.3.
- The battery complies with ANSI/CAN/UL-2271.
European Union Compliance Statement
- Information on Disposal for Users of Waste Electrical & Electronic Equipment
- This symbol on the product or its packaging indicates that used electrical and electronic products should not be mixed with unsorted municipal waste.
- For proper treatment, it is your responsibility to dispose of your waste equipment by arranging to return it to designated collection points.
- Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
- Penalties may be applicable for incorrect disposal of this waste, under your national legislation.
- Please contact your local authority for further details of your nearest designated collection point.
Battery Recycling Information for Users
- This symbol means that batteries and accumulators, at their end-of-life, should not be mixed with unsorted municipal waste.
- Your participation is an important part of the effort to minimize the impact of batteries and accumulators on the environment and human health.
- For proper recycling, you can return this product or the batteries or accumulators it contains to your supplier or a designated collection point.
- Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
- Penalties may be applicable for incorrect disposal of this waste, under your national legislation.
- there are separate collection systems for used batteries and accumulators.
- Please, dispose of batteries and accumulators correctly at your local community waste collection/recycling center.
Radio Equipment Directive
- Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section complies with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU.
Restriction of the use of certain hazardous substances (RoHS) Directive
Ninebot (Changzhou) Tech Co., Ltd. hereby declares the whole product including parts (cables, cords, and so on) meets the requirements of RoHS Directive 2011/65/EU and amendment Commission Delegated Directive (EU) 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2.0”).
Machinery Directive
- Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section complies with the essential requirements and other relevant provisions of the Machinery Directive 2006/42/EC.
EU Authorised Representative:
- Segway-Ninebot EMEA
- Dynamostraat 7, 1014 BN Amsterdam, The Netherlands.
- Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product models: GT1E, and GT2P comply with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU the Machinery Directive 2006/42/EC, and the
- RoHS Directive 2011/65/EU and amendment Commission Delegated Directive (EU) 2015/863.
- The declaration of conformity can be viewed at the following address: http://eu-en.segway.com/support-instructions
UK Compliance Statement Radio Equipment Regulations 2017
- Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section complies with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017.
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
- Ninebot (Changzhou) Tech Co., Ltd. hereby declares the whole product including parts (cables, cords, and so on) meets the requirements of The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Supply of Machinery (Safety) Regulations 2008
- Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section complies with the essential requirements and other relevant provisions of The Safety of Supply of Machinery (Safety) Regulations 2008.
- UK Authorised Representative: UKCA Experts Ltd.
- Dept 302, 43 Owston Road Carcroft, Doncaster, DN6 8DA, United Kingdom
- Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product models: GT1E, and GT2P comply with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017 Supply of Machinery (Safety) Regulations 2008 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
- The declaration of conformity can be viewed at the following address: www.segway.com
Trademark
- Segway, Segway GT, Segway-Ninebot, and the Rider Design are the trademarks of Segway Inc.; Android is the trademark of Google Inc., and App Store is a service mark of Apple Inc.
- The respective owners reserve the rights of their trademarks and copyrights, etc. referred to in this manual.
- We have attempted to include descriptions and instructions for all the functions of the SuperScooter at the time of printing.
- However, due to constant improvement of product features and changes in design, your SuperScooter may differ slightly from the one shown in this document.
- Scan the QR Code on the cover of this manual, or visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the Segway-Ninebot App.
- Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions mentioned herein may not apply to your unit.
- The manufacturer reserves the right to change the design and functionality of the SuperScooter product and documentation without prior notice.
- © 2022 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.
- The Segway-Ninebot App can support SuperScooter with built-in Bluetooth）
Scan the QR code to download the Segway-Ninebot app
- The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time.
- Visit www.segway.com or check the Segway-Ninebot app to download the latest user materials.
- You must install the app, activate your scooter, and obtain the latest updates and safety instructions.
- The pictures shown are for illustration purposes only.
- The actual product may vary.
