Guangzhou UF-212E Battery Speaker User Manual

: June 5, 2024
: GUANGZHOU

Table of Contents

TOP PANEL OPERATING INSTRUCTION
Features
Connecting Unit
Volume Control
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual
BATTERY SPEAKER

DT HIFI U7-212E

Carefully read the operating manual to operate this unit correctly, and keep these manuals handy for future reference.

SPEAKER

TOP PANEL OPERATING INSTRUCTION

1. AUDIO-OUT
2. AUDIO-IN
3.MIC1 IN
4.MIC2 IN
5. GUT IN (
7.DC 12V INPUT
7. 110V-240V/50Hz-60Hz
8. Bass
9. TREBLE
10. VOLUME
11. AUX.IN
12. TF| 13. USB
14. EMBARRASSED
15.M.TREBLE
16. GT.VOL
17. LED CHARGE
18. M.EDHO
19. M.BASS
20. M.VOL
21. M.PRL
22. LED SWITCH
23. MUAH| 24. PEN-NG
26. CHEER
27. ACCOMP
28. CLAP
29. LED DISPLAY
30. NODE
31. PREV
32. P/P/TWS ED
33. NEXT
34. LED MODE.
34. POWER SWITCH
---|---|---

Features

Plays MP3 files stored in your TF Card or USB Disk Drive or external audio device.
FM Radio.
One karaoke socket.
With DT function
With remote control.

Connecting Unit

Connect the supplied AC power cord one end to the unit and another end to AC socket.
SwitcliON” power switch back side of the unfilled power switch to open LED lights.
This unit is manufactured to use on AC 100-240V.

Volume Control

Volume can be controlled from the Unit or Remote Control.
The maximum volume on the remote control will be to the level set on the unit through the rotary volume control.
From the remote press Vol- for Down or VOL+ for up.
When connected to your smartphone wirelessly, volume can be controlled from the unit and your smartphone.
The sound output quality of the speakers will depend on the Quality of the MPaIlles.Volume from the remote will be maximum to the level set manually through the unit volume knob.

Playing MP3 Files through the speaker using the TF Card or the USB Stick.

Playing MP3 Files through the speaker using the TF Card or the USB Stick.
Use the “MODE’ button on the unit’s control panel or remote control to switch between the features of MP3(USB/TF), FM radio or Wireless function.
On unit. USB/TF whichever is plugged later will play.to change from USB to TF.or TF to USB.press USB/TF on the remote to change.
Plug in your USB Disk or TF Card in the slots provided. Please make sure you use the correct file format in your media devices-MP3 FILES ONLY. If your media files do not play press the ( ) (PLAY/PAUSE ) button. please ensure that your media Is properly connected and that your files are in MP3 format, or that the MODE button is on the correct source.
Press to listen to the previous track and( )to skip to the next track from the unit control panel or Remote Control.
To Pause a track. Press the ( )button from the Control Panel or Remote Control. To remove the pause./press the button again.
Please remember to turn off the power of the Speaker before removing the USB Disk or TF Card.

Using AUX(Audio Input Function)

Use the “MODE button on the unit main panel to select AUX.
Use supplied cable to connect your audio device, one end to an audio device like a DVD jack, and another end to the unit “Audio Input jack”

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.