anslut 018278 Head Lamp User Manual
- June 5, 2024
- anslut
Table of Contents
anslut 018278 Head Lamp User Manual
HEAD LAMP
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference. (Translation of the original instructions).
JULA AG, l3OX 363, SE-532 24 SKARA
2022-03-15
© Jula AB
SAFETY INSTRUCTIONS
WARNING!
The product emits optic radiation that can result in a risk of personal injury. Do not look at the light source when it is switched on – risk of eye damage.
- Do not point the light beam at people or animals – risk of blinding and permanent eye damage (retina).
- Keep children under supervision to make sure they do not play with the product.
- Do not expose the product to heat, mechanical stress or anything else it is not intended for.
SYMBOLS
TECHNICAL DATA
DESCRIPTION
Main spotlight with full and dimmed beam, dimmed spotlight with full and dimmed beam, red LED signal lamp. The product is drop tested from 2 metres.
- Power switch
- Function selector button
- Battery indicator
FIG. 1
USE
Insert three alkaline batteries (LR03) with the correct polarity.
LIGHT
Press the switch to switch on and off the main and dimmed beam and to select the luminous flux. Press five times to switch off the product.
Full beam (100%)
Press once for full beam with white, focused light.
Dimmed beam (approx. 40%)
Press twice for dimmed beam with white, focused light.
Dimmed spotlight dimmed beam
Press three times for white, diffuse dimmed beam.
Dimmed spotlight full beam
Press three times for white, diffuse full beam.
SIGNAL LIGHT
Press the function selector button (2) to activate the red LED signal lamp on the front of the product. Press the function selector button three times to switch off the red signal lamp.
Constant
Press the function selector button (2) once.
SOS signal ( … —… }
Press the function selector button (2) twice.
BATTERY INDICATOR
Press the button and hold to activate the battery status indicator. The
battery status is shown for 5 seconds when the indicator is activated.
FIG. 2
MAINTENANCE
CLEANING
Do not use strong detergents or solvents, this can damage the plastic parts. Clean the product with a dry, lint-free cloth.
STORAGE
Remove the batteries if the product is not going to be used for some time to prevent damage from battery leakage.