UBIQUITI USW-Industrial Layer 2 Gigabit Switch User Manual

: June 5, 2024
: UBIQUITI

UBIQUITI USW-Industrial Layer 2 Gigabit Switch

Package Contents

UniFi Switch

Screws (Qty. 6)

Screw Anchors (Qty. 6)

Power Cord

Installation Requirements

Drill with 6 mm drill bit.Phillips screwdriver .Cat5/6 UTP cable for indoor installations. Plenum rated cabling for plenum spaces.

System Requirements

.Linux, Mac OS X, or Microsoft Windows 7/8/10 Java Runtime Environment 1.8 or above recommended .Web Browser: Google Chrome (Other browsers may have limited functionality) UniFi Controller software v5.10.x or newer, available at: ui.com/download/unifi

Hardware Overview

UBIQUITI USW-Industrial Layer 2 Gigabit Switch 5

System LED

Flashing White

|

Initializing.

Steady White

|

Factory defaults, waiting for adoption.

Alternating White/Blue

|

Device is busy; do not touch or unplug it. This usually indicates that a process such as a ﬁrmware upgrade is taking place.

Steady Blue

|

Successfully adopted by a network and working properly.

Flashing Blue

|

This is used to locate a device.

When you click Locate in the UniFi Controller software, the System LED will ﬂash blue. The software will also display the location of the UniFi Switch on the map.

PoE LED

Oﬀ

|

PoE Disabled

Amber

|

802.3af/at/bt PoE

Link/Speed/Activity LED

Oﬀ

|

No Link

Amber

| Link Established at 10 or 100 Mbps Flashing Indicates Activity
|

Link Established at 1000 Mbps 1 Gbps

Green	Flashing Indicates Activity

RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at/bt PoE output.

Ports 9 – 10

RJ45 ports support 10/100/1000 Ethernet connections.

Reset Button
This button serves two functions for the UniFi Switch: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than ﬁve seconds.

Hardware Installation

You have two options for mounting: Screws and Screw Anchors You can use the included

Screws and Screw Anchors

Machine Screws You can use eight M4 machine screws (not included), which must be long enough to extend 6 mm into the Switch.

Wall Mounting

Connecting Power

Connecting Ethernet

Software Installation

Download and install the latest version of the UniFi Controller software at ui.com/download/unifi and follow the on screen instructions.

Note
If you already have UniFi Controller v5.10.x or newer installed, skip to Adopting the UniFi Switch. After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the admin name and password that you created and click Sign In.

You can manage your network and view network statistics using the UniFi Controller management interface. To adopt the UniFi Switch, proceed to “Adopting the UniFi Switch. For information on configuring and using the UniFi Controller software the User Guide on the website: ui.com/download/unifi

Adopting the UniFi Switch

From the UniFi Controller dashboard, click Devices in the left menu bar.

UBIQUITI USW-Industrial Layer 2 Gigabit Switch 14

UBIQUITI USW-Industrial Layer 2 Gigabit Switch 15

The System LED on the UniFi Switch will turn blue to confirm that it has been successfully adopted.

Specifications

USW-Industrial

Dimensions| 254 x 235 x 60 mm

(10 x 9.25 x 2.36″)

Weight| 3.85 kg (8.49 lb)
Interfaces Networking

Management

|

(8) 10/100/1000 802.3bt PoE RJ45 Ports

(2) 10/100/1000 RJ45 Ports

Ethernet In-Band

Power Method| 100 – 240 VAC, 50/60 Hz Universal Input
Power Supply| AC/DC, Internal, 450W DC
Supported Voltage Range| AC Input: 100 to 240VAC, Max. 6A
Max. Power Consumption (Excluding PoE Output)| 20W
LEDs

System RJ45 Ports

|

Status PoE, Speed/Link/Activity

ESD/EMP Protection| Air: ± 24 kV Contact: ± 24 kV

Shock and Vibration	ETSI300-019-1.4 Standard
Operating Temperature Internal AC/DC @ 450W Internal AC/DC @ 240W

-40 to 50° C (-40 to 122° F)

-40 to 60° C (-40 to 140° F)

Operating Humidity| 5 to 95% Noncondensing
Certiﬁcations| CE, FCC, IC

Safety Notices
Heed all warnings. Only use attachments/accessories specified by the manufacturer. Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product in location that can be submerged by water. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
- Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
- The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
- Contact a qualified electrician or the manufacturer if there are questions about the installation appropriate short-circuit backup protection.
Protective bonding must be installed in accordance with local national wiring rules and regulations.

Limited Warranty
ui.com/support/warrant

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC
Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

ISED Canada
CAN ICES-3(A)/NMB-3(A)

Australia and New Zealand
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

CE Marking
CE marking on this product represents the product is in compliance with all directives that are applicable to it.