BLAUPUNKT BlueBot Xboost Automatic Robot Vacuum Cleaner User Manual

BlueBot Xboost Automatic Robot Vacuum Cleaner
User Manual

Safety regulations

Before using this product, please read the following safety instructions and follow all routine safety precautions.
Please read the instructions carefully, please keep the instructions.
Any operation inconsistent with this instruction manual may cause damage to this product.

Note:

1. 0nly authorized technicians can disassemble this product. Users are not recommend­ed to disassemble this product by themselves.
2. This product can only use the power adapter provided by the factory. If other adapters are used, the product maybe damaged.
3. .Do not touch wires, sockets or power adapters when your hands are wet.
4. Do not use cloth curtains or body parts to roll into the product drive wheels.
5. Do not place this product near cigarette butts, lighters and other smoldering fires.
6. Please clean the product after charging.
7. Do not bend wires excessively or place heavy objects and sharp objects on the machine.
8. This product is an indoor household product. Do not use it outdoors.
9. Do not sit on the product.
10. Do not use this product (e.g. bathroom) in wet environment.
11. Before using this product, please remove all vulnerable items (e.g. glasses, lamps, etc.) on the ground as well as items (e.g. wires, paper sheets, curtains) that may entangle the side brushes and air suction passages.
12. Do not put this product in a place where it is easy to fall (e.g. on desks and chairs).
13. Please carefully check whether the power adapter is connected to the socket before use, otherwise, the battery may be damaged.
14. To prevent tripping, please inform other members of the house when this product works.
15. Please empty the dust box before using this product when the dust box is full.
16. The temperature used for this product is 0 to 40 degrees celsius.
17. Do not use this product in a high-temperature environment.
18. Please remove the battery from the machine before the product is scrapped.
19. Please make sure that this product is not powered on when removing the battery.
20. Please recycle the discarded batteries safely.

Warning:

1. Use only the original rechargeable battery and charging seat specially equipped by the manufacturer. Non – rechargeable batteries are strictly prohibited, please refer to product parameters’ for battery specification information.
2. It is forbidden to use products in environments with open flames or fragile objects.
3. It is forbidden to use products in extremely hot (above 40 °C) or extremely cold (below 0 °C).
4. It is forbidden for human hair, clothes, fingers, and other parts to approach the opening and operating parts of the product.
5. It is forbidden to use products on the wet or stagnant ground.
6. It is forbidden for products to absorb any particles such as stones and waste paper that may clog products
7. It is forbidden for products to absorb any inflammable substances such as petrol, toner, and toner for printers or photocopies. Prohibit the use of products in clean areas with flammable items.
8. It is forbidden for products to absorb any burning articles, such as cigarettes, matches, ashes, and other articles that may cause a fire.
9. It is forbidden to place articles at the suction opening. Do not use the product when the suction port is blocked. Clean up dust, cotton wool, hair, etc. at the suction opening to ensure smooth air circulation at the suction opening.
10. Use the power cord carefully to avoid damage. It is forbidden to use the power cord to drag or pull the product and the product charging seat. It is forbidden to use the power cord as a handle. It is forbidden to clamp the power cord in the crack of the door. It is forbidden to pull the power cord at sharp corners and corners. It is forbidden for the product to run on the power cord while the power cord should be far away from the heat source.
11. Do not use a damaged charging seat
12. Even if the product has been severely damaged, burning of the product is prohibited, which may lead to an explosion of the battery of the product.

Product composition / package contents

Product composition/part name

Front Side Robot

Bottom Side Robot

Product usage/preparation

Remove Protection Before using the Robot, remove the protective strip on the Robot and remove the protective film on the charging station

Product use/robot charging

1. Placing and charging: Place the charging station against the wall and on flat ground. Do not place items within the range of 0.5m left and right and 1.5m in front.

2. Connect the power supply.

3. Installing side brush: Install the side brush according to the left and right (L/R).

4. Charging: Place the robot on the charging station for charging. During charging, the indicator light flashes. When the charging is over, the light remains on. The charging time is about 5 hours.
   During the cleaning process, the robot will automatically switch to”Recharging” mode when the battery is low and automatically finds the charging station to charge. You can also command the robot to switch to “Recharging” mode throught the “Recharging” button on the remote control .

Charging attention:

1. The charging station cannot be used in environments with strong reflection such as direct sunlight and nearby mirrors. If there is any object with strong reflection, please cover it 7 cm from the bottom.
2. In order to ensure that the Robot operates in full, please fully charge it before use. The charging time is about 5 hours.
3. When charging, do not attach the water tank to ensure the safety of charging and prevent wet rags from damaging the floor.

Product use/start cleaning

According to different cleaning needs, this product has a variety of cleaning modes to choose from. You can start various cleaning modes through a robot, remote control or App.
Auto-cleaning
Applicable scenario: The most commonly used cleaning method Is that the main engine uses a bow-shaped path to plan and clean the whole house according to the actual home environment. Setting method: In the shutdown state, press and hold the start/pause button. When the Indicator light of the robot Is on, this Indicates that the robot is powered on. When the button is pressed for a short time, or you use the automatic cleaning bottom on the remote control, the robot starts automatic cleaning. To enter the robot super suction mode, press the   one more time.
single Room Cleaning Applicable scenario: used to clean with ‘the single room’ setting method: click the remote control switch button to select the ‘single room cleaning’ mode and to start the single room cleaning.
Friendly reminder. When one single room Is In need of cleaning, please close the door and the Robot will do centralized cleaning In the room. If this room does not have a charging station, the Robot will return to the starting point after cleaning. Single room cleaning mode Is always In the super suction cleaning mode.
Edge Cleaning
Applicable scenario: For Indoor corner cleaning, the robot cleans along the perimeter of fixed objects (such as walls), and returns to the charging station after the edge cleaning Is finished.
Setting method: Click the “Mode Switch” button on the remote control to select the Edge cleaning mode to start the edge cleaning.
Manual Control
Applicable scenario: Suitable for manual control cleaning. Setting method: Click the ‘direction’ buttons on the remote control to control the robot to move forward, left, right or to turnaround 180″.
Product use/pause, start, and shutdown
Pause: During the operation of the robot, press the robot start/pause button or “pause” button on the remote control to pause the operation of the robot. Start: If the robot stops working for more than ten minutes, It will automatically switch to sleep mode (all the robot lights are off). You can wake up the robot by clicking the robot start/pause button first; then click the robot button again or any keys on the remote control and app to restart. Shutdown: After the robot stops working, press the robot start/pause button for a long time. When the indicator light of the robot is off, It means the robot Is shut down.
*Recommendation: after the robot finishes Its work, do not shut down but keep it In a charging state In order to perform better next time.
Product usage/time scheduling setting
Scheduling settings: Press the “Scheduling” button on the remote control for a short time to set the robot time schedule. After you have set the time schedule, the robot will automatically start cleaning at the scheduled time.
PS: Before scheduling the setting, you need to set the robot time through the timing setting button   on the remote control.

Product use/water tank use

Do not use the floor mopping function on carpets. After mopping the floor, please empty the water tank in time and remove the mopping cloth Component maintenance/dust container

E.Take out the high-efficiency filter and the primary filter. Tap gently on the high-efficiency filter to remove dust.
Attention: Do not clean the high-efficiency filter with water. G. The dust container can be cleaned with a dry cloth.
Attention: Do not wash the dust container with water

H. Air dries the dust container and filters; keep them dry to ensure their service life. Recommendation: wash the primary filter with water after use of approx. 15 – 30 days. The maximum service life of the high-efficiency filter is 3 months.
I. Place the primary filter and the high-efficiency filter back into the dust container Attention:

1. Before installing the filter, please ensure that the high-efficiency filter and the primary filter are in a dry state.
2. Do not expose the high-efficiency filter and primary filter to direct sunlight.

J. Close the dust container cover and install the dust container in the Robot.
Note: Do not allow water to seep into the fan port when cleaning.

Component maintenance/water tank and mopping cloth

Component maintenance/ main brush and side brush

Component maintenance/charging dock pins, down view sensor, drive wheel, and universal wheel
Attention: The interior of the charging station pins. the Coin. view sensor and the Dumper all contain sensitive Electronic components. Please use at all times a dry cloth when cleaning! Do not use any wet cloths in order to prevent damage caused by water inflow.
Clean charging station pins
Clean the down-view sensor
Clean drive wheels and universal wheel
If the product will not be used for a long time, you need to fully charge it and turn it off before storing it. The robot must be re-supplied with power every 3 months to maintain the life of the battery. If the battery is discharged or is not used for a long time, the product may not be able to be charged. Please contact us for after-sales maintenance and do not disassemble it yourself.

Troubleshooting

ground and press the cleaning key again.
Dust bin not installed| Dust box removed and not installed| Please the dust container back into the robot and press the cleaning button again.
Battery failure| Abnormal battery charging| Contact after-sales for a battery test.
Please check if the wheel is stuck| Wheel jammed| Remove any possible objects which cause the jammed wheel.
Please check if the front collision is stuck| Front-impact bracket stuck| Check whether the front collision can rebound normally.
Robot connection failed| The machine failed to connect to the server| Check the connectivity of the wireless network with the internet.
The battery is low, please charge the machine| Battery power less than 20 %| The machine automatically enters the recharge mode,
Please check whether the side brush is tangled or jammed| Abnormal edge brushing| Remove any possible objects which cause the jammed side brush.
Please move the machine to the open area.| The machine failed to get out
of trot ‘hie| Please move the robot to an empty place and press the cleaning button again.

Product Parameter

References

• Blaupunkt Bluebot Klantenservice

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>