UBIQUITI UAP-IW-HD WiFi Access Point User Guide

UBIQUITI UAP-IW-HD WiFi Access Point

Package content

installation requirements

• Pre-installed electrical wall box
• Phillips and flathead screwdrivers
• Category 5 (or higher) UTP cable certified for indoor use
• T10 Torx bit (for Torx screw option)

IMPORTANT: The UAP-IW-HD requires an UniFi switch with PoE for power. Passive PoE adapters are not recommended.

IMPORTANT: The UniFi Driver v5.7 is recommended to manage the UAP-IWHD, available for download at: ui.com/download/unifi

System Requirements

• Linux, Mac OS X o Microsoft Windows 7/8/10
• Java Runtime Environment 1.8 (o superior)
• Web browser: Google Chrome (other browsers may have limited functionality).
• UniFi Controller Software v5.7 or later (available at: ui.com/download/unifi)

hardware description back section

PoE + Data Input

• The 10/100/1000 Ethernet port supports 802.3af PoE input and data. The UAP-IW HD itself requires 11W.

Panel inferior

Salida PoE + LAN 1

• 10/100/1000 Ethernet port supports data and PoE gateway (requires 802.3at PoE+ input). The maximum output power of the PoE gateway is 12W.

Note: To power and connect an 802.3af device to the LAN, you must use an 802.3at PoE+ input.

AND 2 – AND 4

• These three 10/100/1000 Ethernet ports support data only. They are used to connect client devices to the LAN.

Reset

The reset button has two functions for the UAP-IW-HD:

• Reset: Press and quickly release the Reset button.
• Restore Factory Default Settings: Press and hold the Reset button for more than five seconds.

Panel lateral

security screw

• (Optional) Security screw secures cover plate after installation. You have theoption of using the included Torx security screw (shown) or Phillips securityscrew.

LED

security tab

• In addition to the optional security screw, the security tab helps secure the cover plate after installation. If you need to remove it, use a flat-head screwdriver to depress the security tab while removing the cover plate:

backplate

• The back plate has several mounting holes for use with different wall boxes. Here are some examples with the proper mounting holes highlighted in blue:

hardware installation

• An electrical wall box should be pre-wired with an Ethernet cable from the box to an UniFi switch with PoE.

software installation

Download and install the latest version of the UniFi Controller software. Run it and follow the instructions on the screen. The software and step-by-step User Guide instructions are available at: ui.com/download/unifi Once you have installed the software and run the UniFi Setup Wizard, a login screen for the UniFi Controller management interface will appear. Enter the administrator name and password you created and click the option to log in.

You can manage your wireless network and view network statistics through the UniFi Controller’s management interface. For information on setting up and using the UniFi Controller software, see the User’s Guide.

Mobile app installation

• Ubiquiti also offers a UniFi app, available from the App Store® (iOS) or the Google Play™ Store (Android). You can use it to make use of basic UniFi access point features without the need to set up an UniFi controller.
• It also allows constant connection of access points for remote controllers (controllers not on the same Layer 2 network) and easy access to local controllers and those being monitored on unifi.ui.com.

Specification

• Dimensions: 139,7 x 86,7 x 25,75 mm (5,5 x 3,41 x 1,01″)
• Weight: 210 g (7,41 oz)
• network interface: (5) 10/100/1000 Ethernet ports
• Buttons: Reset
• feeding method: PoE 802.3af compatible PoE+ 802.3at compatible
• Power supply: UniFi switch (PoE)
• Energy saving: Compatible
• PoE output: 48V direct access (sockets: 1, 2+; 3, 6-)
• Maximum power consumption with PoE gateway: 11W 23W*
• operating frequency: 2,4 GHz 5 GHz
• Maximum transmit power 2,4 GHz 5 GHz: 23 dBm 26 dBm
• DESPITE 2,4 GHz 5 GHz: 2 x 2 4 x 4
• max speed of data 2,4 GHz 5 GHz: 300 Mbps 1733 Mbps
• antenna gain 2,4 GHz 5 GHz: 1,8 dBi 4 dBi
• Wi-Fi standards: 802.11 a/b/g/n/ac/ac-wave2
• wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• Mounting: 1 electrical wall box (not included)
• Operating temperature: -10° C to 60° C (14° F to 140° F)
• operating humidity: 5 to 95% non-condensing
• Certifications: CE, FCC, IC

safety instructions

1. Read, follow, and save these instructions.
2. Pay attention to all warnings.
3. Only use the devices or accessories indicated by the manufacturer.

WARNING: Do not use this product in a location where it may be submerged in water.

WARNING: Avoid using this product during a lightning storm. There is

electrical safety information

1. It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer’s label. Connection to a power source other than those specified may result in malfunction, equipment damage, or fire hazard if limitations are not followed.
2. This equipment contains no operator-serviceable parts. Only a qualified service technician should provide services.

limited warranty

ui.com/support/warranty The limited warranty requires arbitration to resolve disputes on a case-by-case basis and, where appropriate, specifying arbitration instead of jury trials or class actions.

Compliance

FCC STATEMENT

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide acceptable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The FCC has approved this radio transmitter.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions.

1. This device may not cause interference.

• ISED Canada has approved this radio transmitter.
• The device for operation in the 5150-5250 MHz band is intended for indoor use only to reduce the possibility of harmful interference to co-channel mobile satellite systems.

IMPORTANT NOTE

Radiation Exposure Statement

• This equipment complies with radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and used with a minimum distance of 20 cm between the radiator and your body.
• This transmitter must not be co-located or used in conjunction with any other antenna or transmitter.

Australia and New Zealand

Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause radio interference.

Brazil

Note: This equipment is not entitled to protection against harmful interference and may not cause interference in authorized systems.

CE marked

The CE marking of this product indicates that the product complies with all applicable directives.

CE

• list of countries

• Members with broadband fixed wireless access are highlighted in blue.

Note: This device complies with the maximum transmit power limit per ETSI regulations.

The following shall apply to products operating in the 5 GHz frequency range:

Note: Operation in the 5.8 GHz frequency band is prohibited in member states with fixed broadband wireless access. The rest of the listed countries can use the 5.8 GHz frequency band.

WEEE Compliance Statement

• Declaration of conformity
• online resources

© 2022 Ubiquiti Inc. All rights reserved.

References

• Ubiquiti - Rethinking IT
• Ubiquiti - Rethinking IT
• Ubiquiti - Warranty
• Ubiquiti Account
• WEEE Compliance Statement
• Ubiquiti Account
• Ubiquiti - Compliance
• Ubiquiti - Rethinking IT
• Ubiquiti - Warranty

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>