Elitech RC-5 USB Temperature Data Logger Digital Temperature Monitor User Guide
- June 13, 2024
- Elitech
Table of Contents
Elitech RC-5 USB Temperature Data Logger Digital Temperature Monitor
Install Battery
- Use a proper tool (such as a coin) to loosen the battery cover.
- lnstall the battery with the “+” side upward and keep it under the metal connector.
- Put the cover back and tighten the cover.
Note : Do not remove the battery when the logger is running. Please change it when necessary.
Install Software
- Please visit www.elitechlog.com/softwares. Select and download the software.
- Double-click to open the zip file. Follow the prompts to install it.
- When the installation is completed, the Elitechlog software will be ready to use.
Please disable the firewall or close the antivirus software if necessary.
Start/Stop Logger
- Connect the logger to a computer to sync the logger time or configure parameters as needed.
- Press and hold to start the logger until shows. The logger starts logging.
- Press and release to shift between display interfaces.
- Press and hold to stop the logger until shows. The logger stops logging.
Please note all the recorded data cannot be changed for security reasons.
Important!
- Please store the logger in an indoor environment.
- Do not use the logger in a corrosive liquid or excessive heat environment.
- If this is the first time you use the logger, it is suggested to connect the logger to a computer to sync the time.
- Please dispose oof r handle the waste logger properly by local legislation.
Configure Software
- D0wnload Data: ElitechLog software will automatically access the logger and download the recorded data to the local computer if it finds the logger is connected. If not, manually click “Download Data” to download the data.
- Filter Data: Click “Filter Data” under the Graph tab to select and view your desired time range Of the data.
- Export data: Click “Export Data” to save Excel/PDF format files to the local computer.
- Configure options: Set logger time, log interval, start delay, high/low limit, date/time format, email etc. (Check user Manual for default parameters)
Note : New configuration Will initialize ppreviouslyrecorded data. Please make sure to back up all necessary data before you apply new configurations.
Refer to “Help” for more advanced functions. More product information is available on the company website www.elitechlog.com
TROUBLESHOOTING
Technical Specifications
Distributor
EVOCARE AUSTRALIA PTY LIMITED A.B.N- 98 078 566 604 Trading as EVOCARE and
EQUIPMENT Global & P.o. Box 1144, Stafford Qld. 4053 8000
- Fax : 07 3355 5043
- http://www.evocare.com.au
- sales@evocare.com vau
- Email:
Software download : www.elitechlog.com/softwares
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>