UBIQUITI AMO-2G10 Omni Antenna User Guide
- October 30, 2023
- UBIQUITI
Table of Contents
AMO-2G10 Omni Antenna
User Guide
Package content
installation requirements
- Rocket®M2 (sold separately) 13mm
- wrench
- Category 5 (or higher) shielded cabling must be used for all Ethernet connections and must be connected to the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and electrostatic discharge phenomena with Ubiquiti’s Industrial Grade Shielded Ethernet Cable. For more information, visit ui.com/toughcable
Device installation
Specifications
Dimensions | 1012 x 122 x 105mm (39.84 x 4.8 x 4.13″) |
---|---|
Weight with mounting | 2.1kg (4.24lbs) |
Frequency | 2.35 – 2.55GHz |
Revenue | 10 dBi |
lift amplitude | 12th |
electric tilt down | 4th |
VSWR max. | 1.7:1 |
Wind resistance | 200km/h (125mph) |
wind load | 97.9 N at 200 km/h (22 lb at 125 mph) |
Polarization | double linear |
Cross Polarity Isolation | 25dBmin |
Radio frequency connectors | Connectors 2 RP-SMA (waterproof) |
Mounting | Universal pole mount, Rocket mount and waterproof RF jumpers |
included
ETSI specification| EN 302 326 DN2
safety instructions
- Read, follow and save these instructions.
- Pay attention to all warnings.
- Only use the devices or accessories indicated by the manufacturer.
WARNING: Do not use this product in a place where it may be submerged in
water.
WARNING: Avoid using this product during a lightning storm. There is a
remote possibility of an electrical discharge caused by lightning.
electrical safety information
- It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer’s label. Connection to a power source other than those specified may result in malfunction, equipment damage, or fire hazard if limitations are not followed.
- This equipment contains no operator-serviceable parts. Only a qualified service technician should provide services.
limited warranty
The limited warranty requires arbitration to resolve disputes on a case-by- case basis and, where appropriate, specifying arbitration instead of jury trials or class actions.
Compliance
Radio Frequency Exposure Warning
The antenna and transmitter must be installed to maintain a separation
distance from people and must not be co-located or used in conjunction with
any other antenna or transmitter. For the specific separation distance, see
the quick start guide for your Rocket device (transmitter).
WEEE Compliance Statement
Declaration of conformity
online resources
© 2022 Ubiquiti Inc. All rights reserved.
Documents / Resources
|
UBIQUITI AMO-2G10 Omni
Antenna
[pdf] User Guide
AMO-2G10, AMO-2G10 Omni Antenna, Omni Antenna, Antenna
---|---
References
- Ubiquiti - Warranty
- Ubiquiti - Rethinking IT
- Free Online Translator - Preserves your document's layout (PDF, Word, Excel, PowerPoint, OpenOffice, text)
- community.ubnt.com/
- WEEE Compliance Statement
- Free Online Translator - Preserves your document's layout (PDF, Word, Excel, PowerPoint, OpenOffice, text)
- Ubiquiti - Rethinking IT
- Ubiquiti - Compliance
- Ubiquiti - Rethinking IT
- Ubiquiti - Warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>