UBIQUITI POE-24-12W-G Passive Gigabit PoE Injector User Guide
- October 30, 2023
- UBIQUITI
Table of Contents
UBIQUITI POE-24-12W-G Passive Gigabit PoE Injector
Product Information: POE-24-12W-G Quick Start Guide
The POE-24-12W-G Quick Start Guide includes a PoE injector, power cord, and LAN port. The injector provides power to Ubiquiti devices and can be mounted on a wall or surface. The device is designed to comply with FCC rules and regulations and is CE marked.
Specifications
- Package content: PoE injector, power cord, LAN port
- Power input: AC adapter
- Installation: Connect a network cable to the PoE port on the injector and the other end to the Ubiquiti device you want to power. Connect a network cable to the LAN port of the injector and the other end to the router or switch on your local network. Connect the power cord to the injector and the other end to an electrical outlet. The PoE injector can be fixed to the wall or some other surface using the instructions provided in the image.
- Safety instructions: Read, follow and save these instructions. Pay attention to all warnings. Only use the devices or accessories indicated by the manufacturer.
- Electrical safety information: The equipment requires the use of the ground wire as part of the safety certification. Modification or misuse can create a shock hazard, which could cause serious injury or death. If you have any questions about the installation, contact a qualified electrician or the manufacturer before connecting the equipment.
- Limited warranty: The limited warranty requires arbitration to resolve disputes on a case-by-case basis and, where appropriate, specifying arbitration instead of jury trials or class actions. For more information, visit ui.com/support/warranty
- Compliance: FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. The device is CE marked.
Product Usage
- Connect a network cable to the PoE port on the injector and the other end to the Ubiquiti device you want to power (see device specifications).
- Connect a network cable to the LAN port of the injector and the other end to the router or switch on your local network.
- Connect the power cord to the injector and the other end to an electrical outlet.
- Optionally, the PoE injector can be fixed to the wall or some other surface using the instructions provided in the image.
- Read, follow and save all safety instructions provided in the manual. Use only the devices or accessories indicated by the manufacturer.
- If you have any questions about the installation or electrical safety, contact a qualified electrician or the manufacturer before connecting the equipment.
POE-24-12W-G Quick Start Guide
Package content
hardware description
Installation
- Connect a network cable to the PoE port on the injector and the other end to the Ubiquiti device you want to power (see device specifications).
- Connect a network cable to the LAN port of the injector and the other end to the router or switch de su red local.
- Connect the power cord to the injector and the other end to an electrical outlet. current
- Optionally, the PoE injector can be fixed to the wall or some other surface, follow the instructions in the following image.
Specifications
safety instructions
- Read, follow and save these instructions.
- Pay attention to all warnings.
- Only use the devices or accessories indicated by the manufacturer.
- ADVERTENCIA: Superficies client. No trocar.
- ADVERTENCIA: No utilize ester product en un Lugar en el que pedal quasar sumergido en ague.
- ADVERTENCIA: Este product no debt quasar expect a goatee o salpicaduras pore liquidous.
electrical safety information
- It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer’s label. Connection to a power source other than those specified may result in malfunction, equipment damage, or fire hazard if limitations are not followed.
- This equipment contains no operator-serviceable parts. Only a qualified service technician should provide services.
- This equipment is supplied with a detachable power cord that has an integral safety ground wire designed to be connected to a safety ground. to. Do not substitute the power cord with one other than the approved type provided. Never use an adapter plug to connect to a two-wire outlet, as it will break the continuity of the ground wire.
- The equipment requires the use of the ground wire as part of the safety certification. Modification or misuse can create a shock hazard, which could cause serious injury or death.
- If you have any questions about the installation, contact a qualified electrician or the manufacturer before connecting the equipment.
- The indicated AC adapter provides a safety ground. For installation in a building, adequate short-circuit back-up protection must be provided. and. A protective connection must be installed in accordance with national wiring rules and regulations.
limited warranty
ui.com/support/warranty
The limited warranty requires arbitration to resolve disputes on a case-by-
case basis and, where appropriate, specifying arbitration instead of jury
trials or class actions.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions.
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide acceptable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>