UBIQUITI UF-WIFI 4 Port GPON Router with Wi-Fi User Guide
- October 30, 2023
- UBIQUITI
Table of Contents
UBIQUITI UF-WIFI 4 Port GPON Router with Wi-Fi
Package content
System Requirements
- Linux, Mac OS X o Microsoft Windows 7/8/10
- Web browser: Google Chrome (other browsers may have limited functionality)
Before starting
Designing your first deployment of a GPON network requires specific planning and knowledge. For more information on designing and installing a GPON network, including important considerations and best practices, see:
To learn how to configure UFiber devices for the first time to allow the LAN ports of the Optical Network Unit (ONU) to provide connectivity, see: ubnt.link/UFiber-Initial-Configuration
Hardware Overview
wall mount
fiber connection
- WARNING: Never look directly into the ends of the fiber or modules. The light they emit can cause eye damage.
- WARNING: Until ready to use, keep fiber patch cables and modules covered with the included protective caps to ensure connections remain clean.
- WARNING: DO NOT connect the device directly to a UFiber GPON module (UF-GP-B+ or UF-GP-C+). Doing so will damage the optics of the device. Make sure that the signal level received by the device never exceeds -8 dBm. Use a UFiber PLC splitter to add attenuation as needed.
LAN connection
Power connection
- Note: 24V Passive PoE is required to power the device.
- WARNING: The PoE switch must meet the power specifications listed in the Specifications section of this quick start guide.
Access to the configuration interface
- Make sure your computer (or other host system) is connected to the device.
- Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet.
- Launch the web browser. Type http://192.168.1.1 in the address field. Press Enter (PC) or Return (Mac).
- Enter ubnt in the username and password fields. Click Login.
Customize the settings as needed. For more information, see UFiber’s resources, which are available at: http://ubnt.link/UFiber-Support
Specifications
safety instructions
- Read, follow and save these instructions.
- Pay attention to all warnings.
- Only use the devices or accessories indicated by the manufacturer.
- WARNING: To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.
- WARNING: Do not use this product in a location where it may be submerged in water.
- WARNING: Avoid using this product during a lightning storm. There is a remote possibility of an electrical discharge caused by lightning.
- WARNING: CLASS 1 LASER PRODUCT: Do not look at the ends of the fiber optic cable or SFP modules when the converters are powered on.
electrical safety information
- It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer’s label. Connection to a power source other than those specified may result in malfunction, equipment damage, or fire hazard if limitations are not followed.
- This equipment contains no operator-serviceable parts. Only a qualified service technician should provide services.
limited warranty
ui.com/support/warranty
The limited warranty requires arbitration to resolve disputes on a case-by-
case basis and, where appropriate, specify arbitration instead of jury trials
or class actions.
FCC Compliance
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions.
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide acceptable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. The FCC has approved this radio transmitter.
ISED Canada CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. ISED Canada has approved this radio transmitter.
The device for operation in the 5150-5250 MHz band is intended for indoor use only to reduce the possibility of harmful interference to co-channel mobile satellite systems.
IMPORTANT NOTE
Radiation Exposure Statement:
- This equipment complies with radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and used with a minimum distance of 20 cm between the radiator and your body.
- This transmitter must not be co-located or used in conjunction with any other antenna or transmitter.
Australia and New Zealand
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause radio interference.
Brazil
Note: This equipment is not entitled to protection against harmful interference and may not cause interference in authorized systems.
CE marked
The CE marking of this product indicates that the product complies with all
applicable directives.
list of countries
Members with broadband fixed wireless access are highlighted in blue
Note: This device complies with the maximum transmit power limit per ETSI regulations.
The following shall apply to products operating in the 5 GHz frequency range:
- Note: This device is only suitable for indoor use when operating in the frequency range of 5150 – 5350 MHz in all member states.
- Note: Operation in the 5.8 GHz frequency band is prohibited in member states with fixed broadband wireless access. The rest of the listed countries can use the 5.8 GHz frequency band.
online resources
