ThoSecurity PETCAM-2 Digital Pet Collar Indoor HD 1080P Camera Installation Guide
- June 2, 2024
- ThoSecurity
Table of Contents
ThoSecurity PETCAM-2 Digital Pet Collar Indoor HD 1080P Camera
Introduction
This is a New Pet Collar Camera, with Function of Video Record and photo taking. It Can Use to Know Your Pet Behavior, and Find more from the Eye of Your Pet. It Can Work for 2 Hours after Full Charge. It is with the function of video recording, each video clip is 5 minutes, AVI format. It also can take photo manually by pet owner. After the camera turn on under standby status, each hit on the ON/OFF key, it will take a photo. The photo is kept in the memory card folder “PHOTO” in JPEG format.
How to Work?
Step 1 : to Set the Video Date
After the camera is fully charge over 3 hours, the red LED keep on.
Please connect the camera to a PC or Laptop. and You will find a new device from your computer. there is 2 folders and a txt file named “time.txt“. Open the txt file, you will find below: ” 20200715235959 Y”. It means the watermark showing date is year, day, minute, seconds. You can change the figure to current date.If you change from “Y” to “N”. It will be no watermark showing on your video.
Step 2: How to Turn On or Turn Off?
Please press and hold on the ON/OFF key over 3 seconds , the camera will turn on and come to standby status (The blue indicator is keeping on, it is being under standby status) (please note you must put a memory card inside). If you not put a Memory card inside, red and blue light flash and the camera will turn off)
Please note following:under standby status,if you no any operation,the camera will turn off automatically after 30 seconds.
How to Turn Off: under standby status, please keep press and hold the ON/OFF button over 3 seconds to turn off the camera.
When the camera it is under standby status,the blue indicator is always on.
Step 3: How to Take a Photo?
Under standby status hit one times the power ON/OFF, it will take a photo in JPG format and save to folder “PHOTO” Please note the function of taking photo is only manually operation by pet owner. You click one times the ON/OFF key to take a photo.
Step 4: How to Take Video?
Under standby status (the blue LED keep on) Please press on the ON/OFF for 2 seconds. It will start to record video. the blue indicator turn to flash every one second. under recording status, if you hit one times ON/OFF key, the camera turn to standby status again. Please note: the press time on the ON/OFF key must be for 2 seconds, if over 2 seconds, it will turn off.
Product Specification
Application| for Pet Behavior Observation,not to use underwater or
rainfall area| Battery Format and Type| 300mAh,Built-in high
capacity polymer Lithium Battery
---|---|---|---
Video Format| AVI| Charge Voltage| DC5V
Video Clip length| each 5 minutes,about 450MB| Support System|
Windows,Mac Os,Linux
Video Resolution| 1080P| Interface Type| Micro USB
Image format| JPEG| Memory Card Type| TF Card/Micro Sd Card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>