Guangzhou IMT7002 Altec Lansing Party Speaker User Manual
- June 5, 2024
- GUANGZHOU
Table of Contents
Guangzhou IMT7002 Altec Lansing Party Speaker
Product features
- Ultra-low distortion amplifying circuit
- Digital karaoke, treble, and bass independent adjustment
- Built-in MP3 encoding supporting U disk
- Unique acoustic appearance design
- Professional treble and bass gain controlling circuit
- Built-in battery for outdoor activities
- Professional high-effective loud-speaking unit
- Compatible with DVD/VCD/PC and other sound sources
- Suitable for adaptor and charging
- Intelligent power switch charging circuit
SPECIFICATIONS
- Bluetooth Specification: V4.2
- Bluetooth Range: Up to 33 feet
- Power Supply: AC100-240V
- Output Power: 60 Watts
- Subwoofer Size: 15 Inches
- Battery Type: 11.1V7000mAh Lithium on Battery
- Charge Time: Approximately 5 Hours
- Play Time: Approximately 6 Hours
True wireless stereo(TWS) FUNCTION
- The one which is connected to the phone will be master
- Hold 2s Pair button, LED display will say “HOST”
- The slave when you press the BT button, the led light will say “BT”, and the master will automatically connect with the slave. After connecting successfully there will be a prompt voice to tell the user it’s TWS and both of the master and slave will say “BT'”
- Either you press BT/Pair on the master or slave speaker, and the slave will be disconnected.
lighting:
In several led modes, each time you press the lights button the speaker moves
to the next Flight mode. Light will beat, strobe, and pulse to all the hights
and lows of every song.
CONTROL PANEL
- MP3 Control Board Button
- FM/LINE: Select this mode to listen to FM radio stations. Select this mode to choose LINE IN mode.
- BT/PAIR: Press and hold for stereo pairing.
- LIGHT MODES: Press to switch led light modes.
- Previous Track:
- Play/Pause:
- FM antenna
- Mic input
- Aux input:
- USB Input:
- Mic Volume:
- Bass Volume:
- Treble Volume:
- Master Volume:
- Charging indicator
- Power On and OFF
- AC input
Warning
- Do not place objects on top of the device, as objects may search the device.
- Do not expose the device to dirty or dusty environments.
- Do not insert any foreign objects into the device.
- Do not expose the device to a strong magnetic or electrical field.
- Do not use the device in the rain.
- Please check with your Local Authori electronic products.
- Do not disassemble the device. Only a certified service technician should perform the repair.
- The device has apertures to disperse heat. Do not block the device may or retailer for proper disposal of becoming hot and malfunction as a result.
Common simple faults and guidance for operation and repair
Fault phenomenon | Simple fault analysis | Troubleshooting |
---|---|---|
Failing to electrify | The power switch is not opened |
The electricity quantity of the built-in battery is totally
consumed
| Open power switch
Use a power adaptor to charge the battery
No sound| Failing to input sound source
Failing to establish a signal line
The main volume is switched to minimum
U disk playing has no sound
Faults with the external signal source
Poor contact or damage of
external signal line
| Change signal source Reconnect signal line
Properly adjust the volume knob
Inspect U disk or audio switch
Change signal source
Readjust or change signal line
If there is still a fault after the inspection above, please contact the nearest local maintenance department! The product technology of our company is upgraded continuously and we will not inform of the change of product specification and function additionally.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm from the
radiator of your body. This device and its antenna(s) must not be co-located
or operated in conjunction with any other antenna or transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>