SEGWAY GT1 Electric Scooter User Manual

: June 5, 2024
: Segway

Table of Contents

SEGWAY GT1 Electric Scooter
Diagram and Functions
Dashboard
Speed Modes Introduction
Damper Adjustment
Specifications
Common Failures and Solutions
Certiﬁcations
Trademark
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEGWAY GT1 Electric Scooter

Diagram and Functions

SEGWAY-GT1-Electric-Scooter-
FIG-1

Handlebar Functions

Name	Function	Operation method

Power Button

| Power on/off| Press the Power Button to power on the scooter. Press and hold to power it off. Note: Only available when the scooter is unlocked.
Wake up the screen| Press the Power Button to wake up the screen when the screen automatically dims.
Back to the previous speed mode| When the scooter automatically enters PARK mode, press the Power Button to go back to the previous speed mode.
Confirm Bluetooth password| While connecting to the scooter via the Segway- Ninebot app, press the Power Button to confirm Bluetooth password.

Left Control Switch

| Turn on/off the headlight| Rotate the Left Control Switch clockwise/counterclockwise to turn off/on the headlight.
Turn on/off the cruise mode| Press the Left Control Switch to turn on the cruise mode, and the scooter will cruise at a constant speed. Press again to turn it off.
Switch between 1WD and 2WD| When the scooter is at a complete stop, press and hold the Left Control Switch to switch between 1WD and 2WD. * For GT2 only.

Right Control Switch

| Mode switching| Rotate clockwise/counterclockwise to switch between speed modes.
Activate the BOOST mode| 1) Press the Right Control Switch to activate the BOOST mode. In RACE mode only. 2) Press again or switch the speed mode to turn it off. For GT2 only.

Switch to WALK mode

| For GT1: When the scooter is at a complete stop, press the Right Control Switch to switch to WALK mode. At this point, press the Right Control Switch again to go back to the previous speed mode.

For GT2: When the scooter is at a complete stop, press and hold the Right Control Switch to switch to WALK mode. At this point, press and hold the Right Control Switch again to go back to the previous speed mode.

Throttle| Speed up| Twist the throttle to speed up.

Turn Signal Button

|

Turn on/off the left/right signal

| Press the left/right side of the Turn Signal Button, the left/right turn signal will turn off after three blinks. press and hold the left/right side of the Turn Signal Button, the left/right turn signal will keep blinking until it is released.
Horn Button| Turn on the horn| Press the Horn Button, the scooter will beep once.

Dashboard

SEGWAY-GT1-Electric-Scooter-FIG-3 SEGWAY-GT1
-Electric-Scooter-FIG-4

Speed Modes Introduction

SEGWAY-GT1-Electric-Scooter-
FIG-5

Damper Adjustment

SEGWAY-GT1-Electric-Scooter-
FIG-6

S (Slow rebound):
Increase rebound resistance by rotating the Adjustment Knob clockwise.

F (Fast rebound):
Decrease rebound resistance by rotating the Adjustment Knob counterclockwise.

Note:
The damper is set to the default position before leaving the factory. Please follow the steps above to adjust it according to your riding habits.

Specifications

Item	Parameter

Product

Rider

| Max. Payload| 150 kg (331 lbs)
Recommended Age| 14–60 years old
Required Height| 3’11”–6’6”(120–200 cm)

Machine

Traversable Terrain

Battery

Motor

| Motor Type| Air cooled hub motor
Nominal Power| 1.4 kW, 1400 W| 1.5 kW2, 1500 W2
Max. Power| 3 kW, 3000 W| 3 kW2, 3000 W2
| Item| Parameter
---|---|---

Charger

Tire

| Type| 11-inch Self-sealing tubeless tires
Tire Pressure| 32 psi
Material| Rubber

Others

| Speed Modes| WALK mode, PARK mode, ECO mode, SPORT mode and RACE mode

Suspension System

| Front and rear spring suspension
Front and rear adjustable damper
Brake System| Front & Rear disc brakes

Warning:
it is your legal duty to comply with your local traffic law and regulations when using this product. In the Unites States, in certain States, an electric kickscooter is not allowed to be used on public roads (i.e., “on-road” ), if its maximum speed capacity, weight and/or other features do not comply with the mandatory requirements imposed by law. With respect to maximum speed capacity restriction, certain States require that an electric kickscooter’s maximum speed capacity shall be capped at / limited to specific miles per hour if it is for on-road use, and the cap/limit varies in different States. By way of examples, the States that impose such maximum speed capacity restrictions include New York, Florida, Arizona, New Jersey etc. In the event you intend to use this product on-road in a State that imposes such maximum speed capacity restriction, you MUST select a proper lower speed mode of this Product to assure that the product’s maximum speed capacity under such speed mode complies with the law. In the event the maximum speed capacity of the lowest speed mode of this product nevertheless exceeds the maximum speed capacity restriction imposed by a State for on-road use, you shall not use this product on-road in that State. Furthermore, a State may have other law regulating on- road use of this product, such as maximum speed requirements and/or helmet requirements. In addition to State law, there may be further restrictions or prohibitions on use of electric kick scooters by local law and/or regulations. For off-road use of this product, there may be other restrictions and/or limitations imposed by the property owner or others. The App of the product may provide additional useful information related to this matter.

Disclaimer:
this is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purpose only. It is not intended to cover every piece of law and/or regulation that may be applicable to this product. Segway and Ninebot explicitly hereby disclaim any and all warranty and/or representation, express or implied, related to completeness, accuracy, up-to-date of such information. Segway and/or Ninebot reserves the right but not obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any and all the law and/or regulation, requirements, prohibition, restriction and/or limitation imposed by either law, government authority, court, private party or the others that may apply to your use of this product.

Common Failures and Solutions

Error code	Possible causes	Solution
0	Throttle abnormality

Please contact after-sales service or an authorized dealer.

7

| Under-voltage protection of battery/motor controller|

Please try to charge the scooter.

Please contact after-sales service or an authorized dealer.

21| Rear motor hall sensor error
22| Front motor hall sensor error

Certiﬁcations

This product is certified to ANSI/CAN/UL-2272.
The battery complies with UN/DOT 38.3.
The battery complies with ANSI/CAN/UL-2271.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3(B)

Trademark

Segway, Segway GT, Segway-Ninebot and the Rider Design are the trademarks of Segway Inc.; Android is the trademark of Google Inc., App Store is a service mark of Apple Inc. The respective owners reserve the rights of their trademarks and copyrights, etc. referred to in this manual. We have attempted to include descriptions and instructions for all the functions of the SuperScooter at the time of printing. However, due to constant improvement of product features and changes of design, your SuperScooter may differ slightly from the one shown in this document. Scan the QR Code on the cover of this manual, or visit the Apple app Store (iOS) or the Google Play Store (Android) to download and install the Segway-Ninebot App. Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the SuperScooter product and documentation without prior notice. © 2022 Ninebot (Beijing) Tech Co. Ltd. All rights reserved. （※The Segway-Ninebot App can support SuperScooter with built-in Bluetooth）