Guangzhou XT-09 SELFIE STICK TRIPOD for smartphone User Manual
- June 5, 2024
- GUANGZHOU
Table of Contents
Guangzhou XT-09 SELFIE STICK TRIPOD for smartphone
-
REMOTE CONTROL
WIRELESS REMOTE CONTROL
-
ROTATE
360DEGREE ROTATION,CAN TAKE PICTURES HORIZONTALLY AND PORTRAIT -
TRIPOD
TRIPOD CAN BE USED FOR SUPER NIGHT VIEW,STREAMER, SHUTTER AND OTHER SHOOTING
REMINDER
- IN ORDER TO PROTECT YOUR MOBILE,PLEASE KEEP
- THE TRIPOD STAND IN A SMOOTH STATE, AND
- PREVENT OTHER EXTERNAL FORCES FROM TIPPING THE TRIPOD
- THE PICTURES ON THE PACKAGE ARE FOR REFERENCE
- ONLY.THE PRODUCTS(NCLUDING BUT NOT LIMITED
- TO COLORSIZE,SCREEN DISPLAY,ETC.)ARE SUBJECT TO MATERIAL
NOTE: DO NOT PRESS DOWN WHEN THE TRIPOD OF IS IN THE POSITION, NO SIDE CAUSES TRIPOD
DEFORMATION.
REMOTE CONTROL INSTRUCTIONS
BATTERY REPLACEMENT
INSTRUCTIONS
FOR SELFIE STICK
USE FINGERNAIL OR SHARP HARD OBJECT TO ALIGN THE GAP OF THE BACK COVER OF THE
SELFIE STICK, SLIGHTLY PRY THE BATTERY COVER TIGHTLY,REMOVE THE BATTERY AND
REPLACE II
WIRELESS SELFIE STICK INSTRUCTIONS
- PRESS THE CAMERA BUTTON FOR 5 SECONDS AND THE BLUUE LIGHT FLASHES TO INDICATE THAT YOU HAVE ENTERED THE PENDING WIRELESs CONNECTION.
- Tum on the Bluetooth function of the mobile phone and search. When the name of “Xiong Tu device appears on the mobile phone, click the name to connect. Waiting for the blue light to go out indicates a successful connection. Then press the photo control key once to control the phone to take photos.
- IF YOU DO NOT USE THE SELFIE STICK FOR A LONG TIME PLEASE PRESS THE CAMERA BUTTON FOR 5 SECONDS, THEN THE BLUE LIGHT WILL FLASH 3 TIMES AND THEN CLOSE, INDICATING THAT IS HAS REEN TURNED OFE
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>