levenhuk Wezzer PLUS LP30 Thermometer User Manual

: June 5, 2024
: levenhuk

Table of Contents

levenhuk Wezzer PLUS LP30 Thermometer
Levenhuk Wezzer PLUS LP30 Thermometer
Parts overview
Getting started
Weather
History record
Specifications
Care and maintenance
Battery safety instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk Wezzer PLUS LP30 Thermometer

Levenhuk Wezzer PLUS LP30 Thermometer

The kit includes: base station, sensor, user manual, and warranty.

Also required (not included):
2 AAA batteries for the sensor
3 AAA batteries for the base station

Parts overview

Base station

SET button
UP button
DOWN button
MEM button
CH button
Battery compartment cover
Table stand (fold-out)

Sensor

Temperature
Humidity
Current channel
LED indicator
Wall mount hole
RESET button
Channel switch (1—3)
Battery compartment cover
Battery compartment

Interface icons

Time display
Low battery indicator
Calendar and week display
Sensor connection status
Outdoor temperature
Indoor temperature
Outdoor temperature trend
Indoor temperature trend
MAX./MIN. temperature record
Atmospheric pressure trend
Weather forecast

Getting started

Base station

Open the battery compartment cover (6) and insert 3 batteries according to the correct polarity. Close the cover.
Wait until the indoor temperature is displayed on the base station.

Sensor

Open the battery compartment cover (8). The sensor should be operated on channel 1.
Insert 2 batteries according to the correct polarity. Close the cover.
To re-establish the sensor connection manually, press RESET using a pin.

Sensor connection

Place the base station and the remote sensor within the effective transmission range. Ensure that the channels are assigned after you set up the power supply for the base station and all the sensors.
If the reception is successful, the display will show the temperature of the respective outdoor sensor. If the values are not received from a channel, “—” appears on the display. Check the batteries and try it again. Check if there is any source of interference.
When changing batteries, replace the batteries first in the base unit, and then in all the sensors, to re-establish the connection. If an adapter supplies power to any of the devices, briefly disconnect the power to that device when replacing the batteries. If you change the batteries only in one of the devices (for example, in the sensor), the signal may not be received correctly.
If you have problems in receiving the readings, make sure that channel 1 is selected on the sensor, and then press and hold CH on the base station for 5 seconds.
The effective range may differ depending on the unit’s position. Due to interference (various remote control devices, etc.), the maximum distance between the base unit and the sensor may be significantly reduced. In such cases, we suggest moving the base unit and sensor a little. Sometimes it is enough to move one of these units a few inches!

Time setting
Press the SET button and hold it for 3 seconds. The digits that are to be set are flashing. Press UP or DOWN to change the value, and then press SET to continue.
The setting order: Hours > Minutes > Year > Month > Date > Temperature unit.
Finally, press the SET button to save the settings and exit. The language and the selected abbreviations for each day of the week are shown in the following table.

Language	Monday	Tuesday	Wednesday	Thursday	Friday	Saturday	Sunday
English, EN	MON	TUE	WED	THU	FRI	SAT	SUN

Weather

Temperature
Press the UP button to switch between °C and °F.

Weather forecast

Sunny
Partly cloudy
Cloudy
Rainy
Snowy

History record

Press the MEM button to display the MAX./MIN. temperature.
To clear MIN./MAX. temperature records, press and hold the MEM button for 3 seconds.

Specifications

Base station

Temperature, units of measurement| °F, °C
Operating temperature range (indoors)| 0… +50°C (+32… +122°F)
Time format| 24 hours, 12 hours
Weekday display language| English
Screen| monochrome
Power supply| З ААА batteries (not included)
Dimensions| 208x43x210mm (8.1×1.6×8.2in.)
Wireless sensor| 1 pc. (included)
Sensor

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center.
Protect the device from sudden impact and excessive mechanical force.
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire, and other sources of high temperatures.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
Only use accessories and spare parts for this device that comply with the technical specifications.
Check this device and its cables and connections for any possible damage before use.
Never attempt to operate a damaged device or a device with damaged electrical parts!
Damaged parts must be replaced immediately by an authorized service agent.
If a part of the device or battery is swallowed, seek medical attention immediately.
Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior
to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met.
For further details, please visit : www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.