eta 2778 900000 Digital Kitchen Scale User Manual

: June 5, 2024
: ETA

Table of Contents

eta 2778 900000 Digital Kitchen Scale
SAFETY PRECAUTIONS
DESCRIPTION OF THE APPLIANCE (Fig. 1)
PREPARATION FOR USE
OPERATION INSTRUCTIONS
Cleaning and maintenance
ENVIRONMENT
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eta 2778 900000 Digital Kitchen Scale

Digital kitchen scale
eta 2778

SAFETY PRECAUTIONS

Before first use, please read this manual, look at the figures and keep it for further reference.
The appliance is designed for household and similar use (not for commercial or medical operation)!
The appliance can use by people (including children) whose physical, sensual or mental inability or lack of experience and knowledge prevents safe use of the appliance if they are supervised.
Do not immerse the appliance into water and wash under running water!
Acclimatize the scale first if stored at lower temperature.
Use the scale horizontally only on places without danger of turning over, keep the appliance sufficiently far from heat power sources (e.g. oven, stove, fireplace, heat radiators) and strong electro-magnetic field (e.g. microwave oven, radio, mobile phone).
Do not expose the appliance to direct sunlight, low or high temperatures and high moisture. Unstable or soft pad under the appliance may influence accuracy of the appliance negatively.
Protect the scale against dust, moisture, chemicals and abrupt temperature changes.
Handle the scale with care not to damage it (do not overload and throw it).
Do not disassemble the scale and do not remove any components.
Do not put anything on the scale when storing it; the appliance may get damaged.
Remove batteries if you will not use the appliance for longer time.
Replace leaking batteries, otherwise the scale may get damaged.
Dispose off flat batteries in a proper way (see VII. ENVIRONMENT).
The manufacturer is neither liable for damage caused by improper use of the appliance (e.g. degradation of foods, damage to the appliance etc.) nor for damage caused by failure to observe the safety precautions by operation of the warranty.

DESCRIPTION OF THE APPLIANCE (Fig. 1)

A – Unit of scale
A – display
A – plate
A – button TARE – on/off, tare value reset in weighing
A – button MODE – for weight unit setting

Indicators on display

= Negative value
g = Grams
oz = Ounces

PREPARATION FOR USE

Unpack the scale from packaging. Before the very first use, wash that part of the appliance (plate A3) that may come in contact with foods..
Installation of batteries (Fig. 2) Battery: 4 x 1,5 V (included)

Replacing Batteries
Open the battery compartment cover on the bottom part of the scale and insert 4 x 3 AAA batteries; pay attention to correct polarity and close the cover.

OPERATION INSTRUCTIONS

Weighing (Fig. 3)

Put the scale on suitable flat surface (see I. SAFETY PRECAUTIONS). Do not put things you want to weight on the plate before you turn the appliance on!
Press the button TARE to turn on the scale (the display will show all symbols for about 2 seconds).
When the display shows 0 g, the appliance is ready for weighing.
Put the food (thing) you want to weigh in the centre of the plate A3 and wait for settling the value shown on the display.
After weighing, you may turn off the scale by pressing the TARE button or the scale will turn off automatically after 60 seconds.

Change to weight units (A5)
The scale may indicate weight in the following units: g gram, oz – ounce. Repeatedly press the MODE button to change the units as follows: g / oz.

Data on display Mode Indication

1500 g 1500 grams
352,91 oz 52,91ounces

TARE“ FUNCTION (fig. 4) To weigh different loads consecutively without removing loads from the scale.
Put first load on the scale, get weight reading. Press button TARE to reset the display reading to „0“ before adding next load. You can repeat this operation.

Note:
If you press the TARE button when the appliance is loaded by the product, the weight reading will reset on the display. If all products are taken away from the weighing plate,
a negative value will appear on the display.

Auto shut off (Fig. 5)
Auto shut-off occurs if the display shows ‚0‘ or shows the same weight reading for 1 minute. Manual shut off
To maximize battery life, always touch TARE for 3 seconds to turn off the scale after using.

Exceeding the loading capacity of the scale
The maximum weight for a product weighing is 5000 g. The display will show EEEE Error message in case the weight of the product on the plate exceeds 5000 g. It means the product weight exceeds the loading capacity of the scale.
Attention: Remove the excessive weight product from the scales to avoid damage to the appliance.

Error messages are shown on the scale display (Fig. 6) To – replace the batteries
EEEE – scale overload, the weight exceeds 5000 g
UNST – unstable indicator – When the scale is switched on is it an unstable state, the LCD will indicate „UNST“. Put the scale on hard flat surface, it will work normal
If symptoms such as flashing of the display or erroneous indications appear, remove the scales away from disturbing sources or turn off the source for the term of weighing.

Cleaning and maintenance

Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use chemical/abrasive cleaning agents.
All parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavored/colored foods. Avoid contact with acids citrus juices.

STORAGE
Store the scale after use in horizontal (see I. SAFETY PRECAUTIONS).
MAINTENANCE
Do not use coarse or aggressive detergents (e.g. sharp things, thinners or other solvents)! Wipe the scale surface and the glass plate with a soft wet rag. Pay attention no water penetrates the appliance.

ENVIRONMENT

If dimensions permit, all pieces have printed symbols of materials used for production of packing, components and accessories as well as recycling symbols. The symbols on the product or documentation means the electric or electronic parts used in the appliance may not be disposed off together with communal waste. Hand over the electric or electronic part to a waste collection yard for free disposal. Proper disposal of the product will help preserving valuable natural resources and preventing potential negative impacts on environment and human health that would otherwise result from improper waste disposal. For more details, please contact your local authorities or collection yard. Fines may
be imposed for improper disposal of this type of waste pursuant to national directives. Remove flat batteries from the appliance and dispose them off in a suitable way using special collection centres. Do not incinerate the batteries!
Specialized service is required for overhaul maintenance or maintenance requiring disassembly of the internal components of the appliance! The right for warranty repair expires if the above mentioned instructions are not adhered to.

TECHNICAL DATA

Maximum weighing capacity
5000
Accuracy (g)
1
Weight (kg) about
0.88

Regarding EMC, the product conforms to the Council Directive No. 2004/108/EC as amended. The product is in compliance with the Regulation of the European Parliament and Council No. 1935/2004/EC on materials and articles intended to come into contact with food.
The manufacturer reserves its right for unimportant deviations from the standard design without influence of the product function.
PRODUCER: ETA a.s., Zelený pruh 95/97, 147 00 Praha 4-Bráník, Czech Republic.