SAL PCS 230 Multimedia Speaker Instruction Manual
- June 9, 2024
- SAL
Table of Contents
SAL PCS 230 Multimedia Speaker
Product Information
The PCS 230 is a multimedia speaker pair that is suitable for home or office use. It comes with wide-range stereo speakers that produce high-quality audio output. The speakers have a built-in power cord with a USB plug that can be connected to a computer or an adapter for power supply. The PCS 230 has both wired and wireless input options, including a 3.5mm jack for AUX audio input and Bluetooth version 4.2 with a maximum range of 10m. The device has an alternating RGB LED light effect that changes constantly.
Product Specifications
- Speaker Type: Active stereo speaker pair
- Speaker Output: 2 x 3W
- Input Options: Wired and wireless
- Wired Input: AUX 400mV (3.5mm plug)
- Wireless Input: Bluetooth version 4.2 with a maximum range of 10m
- Bluetooth Profile: Pm
- LED: RGB LED with constantly changing lights effect
- Power Supply: Built-in power cord with USB plug, power supply from a computer or adapter (optional)
- Recommended Mains USB Adapter: SA 24USB, SA 50USB
- Dimensions/Weight: (2x) 65x100x75mm / 0.35kg
Product Usage Instructions
-
To power the speakers, connect the built-in power cord with USB plug to a computer or a mains USB adapter (not included). The rated current consumption of this product is ~0.5A. Note that USB sockets on computers and various devices have different charging parameters, so check the specifications of the charger or USB socket before connecting.
-
The speaker with the label on its back is the right channel, so place it on your right. For example, you can put it next to the right side of the monitor and the other speaker on its left side.
The two speakers should be up to ~0.8 metre apart for perfect stereo surround effect. -
To connect the speakers to a computer, tablet or mobile phone, use either the wired or wireless input options. For wired connection, plug in the 3.5mm jack into the AUX audio input. For wireless connection, turn on Bluetooth on your device and pair it with the PCS 230. Note that one sound box can be paired with one BT signal source at a time.
-
If the wireless connection is lost, turn off BT mode and then turn it back on if necessary on your mobile device. Alternatively, you can also disconnect and reconnect the speaker.
-
In AUX mode, find the tone settings in your computer’s settings. You may want to install an appropriate program for better sound quality. The sound quality depends on the quality of the audio signal received from by the external device and its volume and tone settings.
-
In BT mode, correctly setting the volume and tone on the mobile
phone is important for good sound quality. You can choose from countless equalizer applications for free. -
To prevent possible hearing damage, do not listen at high volume levels for long periods.
WARNINGS
- Before use of the product, please read this instructions manual and keep it for future reference. The original document was prepared in Hungarian language. This appliance can be used by children aged 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are supervised or have been given instructions concerning the use of the appliance and understand the hazards involved. Children may not play with the appliance. Children may perform the cleaning or user maintenance of the appliance subject to supervision. After removal of the packaging, inspect the product for possible damage during shipment. Keep the packaging away from children if it contains plastic bags or other potentially hazardous items.
- Avoid connecting or disconnecting cables during use. The resulting noise may damage the device.
- In order to protect the audio system from external noise, run audio cables separately from network cables.
- Turn off the device and disconnect the power supply after use.
- Follow the usual safety rules. Do not touch the appliance, power cord or mains charger (optional) with wet hands.
- Protect the device from dust, humidity, liquids, moisture, frost and shocks, as well as from direct heat and sunlight.
- Only for use under dry, indoor conditions.
- Make sure that no foreign objects are inserted through the openings!
- Protect the device from splashing water and avoid placing objects filled with liquids, such as drinking glasses on the device.
- Do not place sources of open flame, such as candles on the device.
- Do not dismantle, modify the device, as it may cause fire, accidents or electric shock.
- In case of a malfunction, immediately disconnect the power supply and contact a professional technician.
- The speakers contain magnets, so do not place sensitive products (e.g., credit card, tape recorder, compass…) in their vicinity.
- Incorrect installation or unprofessional use will void the product warranty.
- This product is for household, private use, it is not intended for commercial or industrial applications.
- After the useful life of the product, it is to be considered as hazardous waste. Dispose of the product according to local legislation.
- Somogyi Elektronic Kft. certifies that the radio equipment complies with Directive 2014/53/EU. The EU Declaration of Conformity is available at the following website: somogyi@somogyi.hu
- Due to continuous improvements, technical data, operation and design are subject to change without notice. The most recent instructions manual is available for download from the www.somogyi.hu website.
- However we regret such inconvenience, we do not take any responsibility for possible printing errors.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
DISPOSAL
Waste equipment must be collected and disposed separately from household waste
because it may contain components hazardous to the environment or health. Used
or waste equipment may be dropped off free of charge at the point of sale, or
at any distributor which sells equipment of identical nature and function.
Dispose of product at a facility specializing in the collection of electronic
waste. By doing so, you will protect the environment as well as the health of
others and yourself. If you have any questions, contact the local waste
management organization. We shall undertake the tasks pertinent to the
manufacturer as prescribed in the relevant regulations and shall bear any
associated costs arising.
APPLICATION
This multimedia speaker pair is primarily recommended for home or office use.
It is perfectly suited for connection to a computer, tablet or mobile phone.
With wired connection to a computer, you can still listen to your mobile phone
via wireless BT connection. The unit has constantly changing lights effect.
POWER SUPPLY
Connect the USB cable to a computer or a mains USB adapter (not included).
Recommended mains charger option: SA 24USB, SA 50USB. The rated current
consumption of this product is ~0.5A. Usually, it can be operated from any USB
port of any PC.
- USB sockets on computers and various devices have different charging parameters. Check the specifications of the charger or USB socket before connecting. Maximum values in general: USB2.0: 500 mA, USB3.0, 3.1: 900 mA, USB-C: 1.5A/3.0A
COMMISSIONING
Make sure that the unit is disconnected from the mains when making
connections. Switch off both the sound box and the device to be connected via
the AUX socket. Make sure that the connectors have correct wiring and
polarity. Keep the audio cable away from power cords. Set the volume control
on the cable to medium volume. The speaker pair turns on (“POWER ON”) when it
receives power via USB. When turned on, the AUX mode (wired input) is
activated. You can start listening to the device connected with the 3.5mm
stereo jack.
- The speaker with the label on its back is the right channel, so place it on your right. For example, you can put it next to the right side of the monitor and the other speaker on its left side. This will make the stereo surround effect perfect. The two speakers should be up to ~0.8 metre apart.
VOLUME CONTROL AND FUNCTION SWITCHING
You can adjust the volume using the rotary knob on the cable. The availability
of the BT function is subject to the availability of e.g., a cell phone via
wireless connection. A voice announcement informs you about the current mode.
The wired AUX input and the wireless BT connection enables to connect two
different devices at the same time. It is best to connect your computer via
wired and your mobile phone via wireless connection. When you turn the unit
on, the AUX mode is active. If you connect an external device via wireless BT
connection, it will switch from AUX to BT mode. If you turn off BT mode on
your phone, the AUX mode will be active again.
- The sound quality depends on the quality of the audio signal received from by the external device and its volume and tone settings.
- If the sound box receives weak signal (low volume), it may cause extra noise, while a too large signal may cause distortion. It is recommended to keep the volume of the source at medium level.
- To make the appropriate connection, you may need to buy a connection cable or, in some cases, an external adapter. For more information, see the user guide of the device you want to connect.
AUX WIRED MODE
You can use a ø3.5mm stereo jack to receive the headphone or LINE OUT output
of an external device. If you set up for example a PC, multimedia player,
musical instrument, CD/DVD player, mobile phone, tablet…, the AUX mode will be
enabled. (BT mode has priority over AUX mode when activated.)
- In AUX mode, you need to find the tone settings in your computer’s settings. You may want to install an appropriate program for better sound.
- Note that different signal sources and volume levels may require different settings. Otherwise, the sound quality may deteriorate. Always find the best volume and tone settings for the current program.
WIRELESS BT CONNECTION
Within a maximum range of 10 meters, the unit can be paired with other equipment communicating according to the BT protocol. After pairing, you can listen to music played on your mobile phone, tablet, notebook or other similar device. The BT function is activated after pairing the speaker box and the playback device. Place the device to be paired in the vicinity of the unit, and find nearby wireless BT devices, including this sound box, as described in its operating manual. Connect the two devices. Successful connection (“CONNECTED”) is confirmed by an acoustic signal. Then you can listen to the desired program via the speakers. To return to AUX mode, disable the BT connection (“DISCONNECTED”).
- In BT mode, correctly setting the volume and tone on the mobile phone is important for good sound quality. You can choose from countless equalizer applications for free.
- One sound box can be paired with one BT signal source at a time.
- If the wireless connection is lost, turn BT mode off and back on if necessary on your mobile device. Alternatively, you can also disconnect and reconnect the speaker.
- If you receive a phone call to the connected mobile phone while listening to music, the music will pause. After your conversation, restart playback if it does not resume automatically.
- The actual range depends on the other device and the environmental conditions (e.g., walls, human bodies, other electrical appliances, motion…)
- Electrical devices operated nearby may cause abnormal operation or noise; this does not indicate a malfunction of the sound box!
LED LIGHT EFFECT
An RGB LED light effect is activated when the sound box is switched on. Colours change continuously as long as the power supply is available.
CLEANING, MAINTENANCE
Switch off and unplug the device before cleaning. Use a soft, dry cleaning cloth. Avoid the use of any aggressive detergents and liquids. Periodically check the integrity of the connection cables and housing. In case of a malfunction, immediately disconnect the appliance and contact a specialist.
TROUBLESHOOTING
In case of any malfunction, turn off the appliance and disconnect all cables.
Try to turn it back on later. If the problem persists, please review the list
below. This guide can help troubleshoot the issue, provided that the appliance
is connected properly. Consult a specialist if necessary.
General
The appliance does not work and the LED lights are off.
- No power supply.
- Connect the USB cable and check if it is live.
The device appears to work, but does not make a sound.
- The volume control setting is incorrect.
- Make sure that the volume control on the speaker or signal source is not set to minimum.
- The audio cable is not connected properly.
- Make sure that the audio cable is connected correctly and wired in the standard way.