Cololight LS168E MIX Extension User Manual

Cololight LS168E MIX Extension

PRODUCT INSTRUCTION

Cololight MIX is an uplifting smart lighting system that continue to excite. The monoblock creates diverse and beautiful atmosphere, all the more so if extended with the extensions and future connectable parts. Besides various stunning light effects, it’s also featured with music visualizer. With battery power supply and magnetic attraction, you can light up Cololight MIX anywhere.

CONTENTS (Cololight MIX/LS168A)

1. Color light MIX x 1
2. User Manual x 1
3. USB Type-C charging cable x 1
4. 3M adhesive tape x 2
5. Connecting plate x 2

CONTENTS (Cololight MIX Extension/LS168E)

1. Color light MIX Extension x 1
2. User Manual x 1
3. 3M adhesive tape x 2
4. Connecting plate

DETAIL (Cololight MIX /LS168A)

1. Uniform plate
2. Button
3. Connecting slot
4. Battery slot
5. The type-C power supply port
6. DC 24V power supply port
7. Magnet

DETAIL (Cololight MIX Extension/LS168E)

1. Uniform plate
2. Connecting slot
3. DC 24V power supply port
4. Magnet

POWER SUPPLY

1. For a MIX: use the Type-C charging cable in the contents with a DC 5V 2A adapter (need to buy it separately).
2. For Several MIXs: connect the first MIX with a DC 24V adapter(need to buy it separately). And connect the rest MIXs or MIX Extensions one by one to the first MIX by connecting plates.
3. For wireless usage: charge with a Battery 18650(need to buy it separately）.

OPERATION INSTRUCTION

1. Light up: click the button.
2. Light off: long press the button for 2 seconds.
3. Change light mode(dynamic/selected color/music/system): double-click the button when light is on.
4. Change light effect(in the light mode above): click the button when light is on.
5. Reset and start pairing: long press the button for 5 seconds, until the light flashes blue.

CONNECTION INSTRUCTION

When connecting, the MIX connected to the DC 24 V adapter will be used as the main control light, and other MIXs or MIX Extensions need to be directly or indirectly connected to the main control light through connecting plates, so as to obtain the power supply and light effect signal from the main control light.
Note: the signal can only be transmitted in the direction of the arrow on the connecting plate, not in the reverse direction.

WALL MOUNT INSTRUCTION

1. If you have an iron background on your wall: directly put the MIX on the iron plate by the magnet.
2. If you cannot use the magnet: stick the MIX to the wall with 3M adhesive tapes

APP INSTRUCTION

1. Scan QR code or input following URL in your mobile brower to download App. http://www.ilifesmart.com/getapp_qlgp.html
2.  Or you can visit the iOS App Store or Google Play and search for“ Cololight”.
3. Pair up Cololight MIX with your mobile device according to the instruction on App.
4. Please check the FAQ in the Cololight App if you have any problems.

SPECIFICATIONS (Cololight MIX/LS168A)

1. Size（mm）: 128L x 128L x 30.6H
2. Weight: 165g(Without Battery)
3. Communication protocol: Wi-Fi
4. Input: DC 5V/24V or Battery 18650
5. Operating temperature: -5~45℃
6. Operating humidity: 5~90%
7. Material: ABS+PC
8. Max power: 7.5W
9. Control mode: button/music/App Control
10. HUE: 16millions RGB

SPECIFICATIONS (Cololight Mix Extension/LS168E)

1. Size（mm）: 128L x 128L x 30.6H
2. Weight: 150g(Without Battery)
3. Input: DC 24V
4. Operating temperature: -5~45℃
5. Operating humidity: 5~90%
6. Material: ABS+PC
7. Max power: 7.5W
8. HUE: 16millions RGB

HAZARDOUS SUBSTANCE TABLE.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
   Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
   Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
   This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, many cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV techinician for help.

RF EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

CE & WEEE STATEMENT

DECLARATION OF CONFORMITY
Hereby, LifeSmart declares that the radio equipment type Cololight is in comliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://global.ilifesmart.com/ce/docs/
Notice: This device may be used in each member state in EU.

WEEE Directive Compliance
Device labelled with this symbol should not be disposed with other household wastes. It shall be handed over to the applicalbe collection point for the recycling of waste electrical and electronic equipment.

WARNING
This product contains small parts that can cause danger if swallowed by children. This product is not suitable for children under the age of 3. Children under the age of 14 must use this product under parental supervision.

WARRANTY & SUPPORT
Thank you for purchasing this LifeSmart product. In order to protect your rights, please read the following content carefully: The warranty period of our company’s products is one year from the date of purchase or longer if local laws impose a longer minimum term, in which case the minimum term is the warranty period. During the warranty period, any faults caused by the product itself or for quality problems that arise under normal usage, LifeSmart will provide a free replacement.
The following conditions are not covered by the warranty:

1. Product failure or damage caused by installation, use, and maintenance that is not in accordance with the product instructions;
2. Products beyond the warranty period;
3. Products that have the barcode tampered with or removed;
4. Devices that have been tampered with or customized outside of LifeSmart Terms of Service as on the LifeSmart App and website;
5. User-caused damage, such as inappropriate voltage input, high temperature, accidental spillage, physical damage, etc;

User support e-mail address: support@ilifesmart.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>