eta 002896000 Poppy Seed Mill Instruction Manual

: October 30, 2023
: ETA

Table of Contents

eta 002896000 Poppy Seed Mill
Product Information
Product Usage Instructions
SAFETY NOTICE
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
PREPARATION AND USE
MAINTENANCE
ENVIRONMENT
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eta 002896000 Poppy Seed Mill

Product Information

The product is an extra attachment for food processors ETA 0023 Gratussino, ETA 0028 Gratus, ETA0030 Meno, ETA 0033 Mezo, ETA 0034 Mezo II, ETA 0038 Gratus Kuliner, ETA 0128 Gustus and meat mincer ETA 6075 Ambo II.
The extra attachment is a poppy seed mill with a regulating disc H5 and a release key H6.
The weight of the product is approximately 0.8 kg.

Product Usage Instructions

Remove all packaging material and take out the extra attachment. Remove all possible adhesion foils, stick-on labels or paper from the accessories.
Before the first use, wash the parts that will be in contact with food (i.e. the carrier, cover, grinding discs, pusher plate) in hot water with a detergent, rinse thoroughly with clean water, wipe till dry, or let it dry. Wipe the carrier with a clean, wet cloth.
Installation of the extra attachment into the drive unit:
- Slide the assembled poppy seed mill (with the gearwheel) onto the drive unit outlet at a 45 degree angle.
- Turn it slightly anti-clockwise to secure it in its horizontal position (a click sound will be heard).
- To dismantle the assembled mill, press the appropriate release control (e.g. button) on the drive unit, start turning the mill slightly clockwise as far as it goes and then slide it out of the drive unit outlet.
Setting fineness/coarseness of grinding:
- Fineness of grinding is set by a turning regulating disc H5.
- Turning the disc clockwise reduces the distance between the grinding discs and thus the fineness/coarseness of grinding can be changed.
- To release the regulating disc easily H5, use the release key H6.
Check for presence of any foreign objects before milling (e.g. fragments of stones) which could damage the product (e.g. abrade the grinding discs).
The poppy seeds must be dry and stored in a dry place. If the poppy seeds are ground too slowly, with difficulty and if excessive heat is produced, it indicates that the poppy seeds are too damp.

Extra attachment for food processor ETA 0023 Gratussino, ETA 0028 Gratus, ETA0030 Meno, ETA 0033 Mezo, ETA 0034 Mezo II, ETA 0038 Gratus Kuliner, ETA 0128 Gustus and meat mincer ETA 6075 Ambo II.
Poppy seed mill
eta 002896000
INSTRUCTIONS FOR USE
Dear customer, thank you for purchasing our product. Prior to putting this device into operation, please read these instructions for use carefully and be sure to store well these instructions along with the warranty card, receipt and, if possible, also the product packaging and its inner contents.

SAFETY NOTICE

Consider these instructions to be a part of the appliance and pass them on to any other user of the device.
This appliance must not be used by children. Keep the device out of reach of children. The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers. Children must not play with the appliance.
Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.
Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
If leaving the extra attachment unsupervised, always switch off and disconnect the drive unit from the mains.
When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
Never use the appliance, if it is not functioning correctly or if it has fallen on the fl oor and been damaged or if it has fallen into water. In such cases take the appliance to a professional service centre to verify its safety and correct function.
After finishing work and before cleaning, always switch off the appliance and disconnect it from power supply by taking the power cord connector out of the electric socket.
The extra attachment is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
Do not leave the appliance in operation without supervision and supervise it for the entire time that food is being prepared!
This extra attachment is designed for processing of poppy seeds only! Do not process other foodstuffs (e.g. cereals, flax and sesame seeds, corn, rice, buckwheat, dried mushrooms, herbs, spices and coffee beans, etc.).
Never assemble the extra attachment on the drive unit!
Do not turn on the appliance without any ingredients inside!
Never adjust the coarseness of grinding while the drive unit is running!
Never tighten the grinding discs by force!
When assembling the extra attachment, follow the instructions for use carefully. In order to ensure proper functioning, any other way of assembling the extra attachment is not permissible
The assembled extra attachment can be attached and removed only when the drive unit is switched off and the power cord is unplugged from the power socket.
Do not leave the extra attachment in operation unsupervised and supervise it throughout the entire process of food preparation!
Long hair, loose clothes or accessories and jewellery can get caught by the rotating parts of the extra attachment. Make sure that your hair, clothes and accessories do not get into dangerous vicinity to the rotating parts!
Do not insert the extra attachment or its parts into any body orifice.
Never immerse the carrier into water and never wash it in running water!
Do not exceed the maximum allowed period of continuous operation of the appliance/drive unit!
Before removing the extra attachment from the drive unit, allow the rotating parts to stop completely.
Use the extra attachment only with the drive unit / food processor designed for this type. Using another type of drive unit / food processor can present a risk for the operator.
Never insert any objects (e.g. fingers, fork, knife, spatula, spoon) into filling holes and rotating parts of extra attachment.
Before preparation, remove possible packaging from food (e.g. paper, PE bag, etc.).
If the food that is being processed starts sticking to the extra attachment, switch off the drive unit, dismantle the extra attachment and clean it.
It is not permissible to adjust the surface of the extra attachment (e.g. self-adhesive paper, foils, etc.)!
Use the extra attachment only for its intended purpose described in these instructions for use. Never use the extra attachment for any other purpose.
WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
The manufacturer does not undertake any responsibility for damages or injuries caused by improper use of the extra attachments and the accessories (e.g. food deterioration, injuries, cuts) and does not undertake any responsibility arising from the warranty on the appliance in case that the above safety warnings are not followed.

Attention
Read and follow the safety instructions in the manual to the food processor or the meat mincer.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

(fig. 1)

H – Poppy seed mill
H1 – carrier (assembled)
H2 – cover with funnel
H3 – grinding discs (2 pcs)
H4 – pusher plate
H5 – regulating disc
H6 – key

PREPARATION AND USE

Remove all packaging material and take out the extra attachment. Remove all possible adhesion foils, stick-on labels or paper from the accessories. Before the first use, wash the parts that will be in contact with food (i.e. the carrier, cover, grinding discs, pusher plate) in hot water with a detergent, rinse thoroughly with clean water, wipe till dry, or let it dry. Wipe the carrier with a clean, wet cloth.

Assembly (fig. 1)
Put carrier H1 onto cover H2. Put “fixed” grinding disc H3 onto the carrier, then start turning with the disc slowly until the three arresting projections on the disc fit in the three created indentations in the carrier. Now place the “moving” grinding disc (i.e. with grooves facing each other) on the “fixed” grinding disc. Slide pusher plate H4 onto the shaft so that the central projection faces the opening in the grinding disc. Then start turning the pusher plate slowly until the three arresting indentations on the plate fit in the three created projections in the disc. Finally, screw regulating disc H5 onto the carrier shaft and screw it.

Installation of the extra attachment into the drive unit (fig. 2)
Slide the assembled poppy seed mill (with the gearwheel) onto the drive unit outlet at a 45 degree angle and by turning it slightly anti-clockwise, secure it in its horizontal position
(a click sound will be heard). To dismantle the assembled mill, press the appropriate release control (e.g. button) on the drive unit, start turning the mill slightly clockwise as far as it goes and then slide it out of the drive unit outlet.

Setting “fineness/coarseness” of grinding (fig. 1, 3)
Fineness of grinding is set by a turning regulating disc H5. Turning the disc clockwise reduces the distance between the grinding discs and thus the fineness/coarseness of grinding can be changed. To release the regulating disc easily H5, use the release key H6.

Attention

As soon as the grinding discs grind / rub against each other, the finest possible degree of grinding has been set.
If the graininess of the processed sample is now ideal, complete the grinding process on the remaining amount of seeds. In case that you need to process a higher amount
of poppy seeds, make sure not to exceed the maximum operating time of the drive unit.
When grinding a “higher” amount of poppy seeds, the parts of the extra attachment can get hot (e.g. the grinding discs, pusher plate, carrier). Wait a moment before disassembly and cleaning. Be careful not to get burnt.

Use

Pour poppy seeds into the filling hole of the mill cover (maximum amount is 150 g). The amount of processed poppy seeds is regulated by the grooves in the grinding stones. Place a suitable container under the mill to collect the ground poppy seeds. Start up the drive unit. If the drive unit has a speed control, set it to its “middle” or maximal speed (i.e. speed 4 or MAX.). We recommend that you first check a small sample of poppy seeds on graininess upon their processing (i.e. grinding). If the graininess of ground poppy seeds is not optimal, switch off the drive unit and then adjust the setting by regulating disc H5 (i.e. by turning anti-clockwise = coarser grinding, by turning clockwise = finer grinding).
If the graininess of the processed sample is now ideal, complete the grinding process on the remaining amount of seeds. In case that you need to process a higher amount of poppy seeds, make sure not to exceed the maximum operating time of the drive unit.

Recommendation

Ensure good quality of poppy seeds. We recommend that you check poppy seeds for presence of any foreign objects before milling (e.g. fragments of stones) which could damage the product (e.g. abrade the grinding discs). Possible complaints within the warranty period as a result of these impurities will not be taken into account.
Use only dry poppy seeds when milling! Poppy seeds must be ground, not pressed, so that they stay loose, do not pulp and do not lose their distinctive flavour.
Poppy seeds contain oil. To ensure good grinding results, do not set a very fine degree of grinding.
Poppy seeds are a simple and living „natural can“. Therefore it reacts hygroscopically and must be stored at a dry place. If the poppy seeds are ground too slowly, with difficulty and if excessive heat is produced, it indicates that the poppy seeds are too damp.
Interrupt the grinding process and let the poppy seeds dry out for a sufficient time (for about several hours) so that the excessive humidity can evaporate. You can also use electrical/gas/hot-air oven set to 50 °C (max.) to dry out the poppy seeds.
In case that you need to process a higher amount of poppy seeds, make sure not to exceed the maximum operating time of the drive unit.
Preparation (processing) time ranges in units of minutes, depends on the quantity, type and quality of used poppy seeds and on the set fineness of grinding (ca. 100 g / 1 minutes).

MAINTENANCE

(fig. 4)

Pull out the power cord plug of the drive unit from the power socket before handling the extra attachment in any way! Do not use abrasive and aggressive detergents!
To clean carrier H1, wipe it with a wet cloth with a detergent. Wash all other accessories immediately after use in hot water with detergent. Plastic parts are suitable for washing in dishwashers. However, metal parts (H3, H4, H5) are not to be put in dishwashers as they may go dark or rusty because of the detergents used. Any impurities in gaps or corners and grinding stones may be easily cleaned with the provided brush. Be careful when cleaning the grinding discs! Make sure that the grinding edges/grooves of the discs do not come in contact with any hard objects which would make them blunt and thus reduce their efficiency. We recommend that you oil the grinding discs and pusher plate by cooking oil after washing and wiping the parts dry. Some ingredients can colour the accessories in a way.

However, this does not affect the function of the appliance and is not a reason for a replacement under warranty! This colouring usually disappears on its own after some time. Never dry plastic mouldings over a heat source (e.g. heater, electric/gas stove). Store the extra attachments thoroughly cleaned at a dry, dust-free and safe place, out of the reach of children and incapacitated people.

ENVIRONMENT

If the dimensions allow, there are labels of materials used for production of packaging, components and accessories as well as their recycling on all parts. The symbols given on the product or in the accompanying documentation mean that used electric or electronic products must not be disposed of together with municipal waste. For their proper disposal, hand them over at special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authority or at the local waste collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations.
Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair!

TECHNICAL DATA

Weight (kg) approx.

The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS MANUAL:
HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.

TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

The symbol indicates a WARNING.
The symbol material designed for contact with food

CAUTION: Do not put fingers or other items inside