Whirlpool FFB 9458 WV BE 9kg Washing Machines with Steam Function User Guide

Whirlpool FFB 9458 WV BE 9kg Washing Machines with Steam Function

DAILY REFERENCE GUIDE

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
For more complete user support, register your device at www.whirlpool.eu/register

Please read the content of the Health & Safety and Installation Guides thoroughly before you use this appliance.

• The transit bolts must be removed before the appliance is used.

See the Health & Safety and Installation Guides for detailed instructions on how to remove the transit bolts

PRODUCT DESCRIPTION

APPLIANCE

1. Top
2. Detergent dispenser
3. Control Panel
4. Lid handle
5. Door
6. Water filter – behind kick panel
7. Removable kick panel
8. Adjustable feet (2)

CONTROL PANEL

1. On/Off button
2. Programmed selector
3. Start/Pause button
4. Temperature button
5. Fresh Care+ button
6. Dry Only button / Lock button
7. Drying settings button
8. Display
9. Start delay button
10. Spin speed button

DETERGENT DISPENSER

Prewash Compartment

• Detergent for prewash

Main Wash Compartment

• Detergent for the main wash
• Stain remover
• Water softener

Softener compartment

• Softener
• Liquid starch

Pour softener or starch solution into the compartment without exceeding the “max” level.

Release button
(press to remove tray for cleaning).

Preferably use the partition A when washing with a liquid detergent for washing, to ensure that the correct quantity of detergent is used (the partition is included in the bag containing the instructions). Move the partition into slot B when using detergent powder.

FIRST TIME USE

See the section DAILY USE for instructions on selecting and starting a programmed.

FIRST CYCLE OPERATION
Remove any manufacturing debris:

1. Select the “ ” programmed with a temperature setting of 60 °C.
2. Pour a small quantity of detergent powder into the main wash compartment of the detergent dispenser (maximum 1/3 of the quantity the detergent manufacturer recommends for lightly soiled laundry).
3. Start the programmed without loading the washer dryer machine (with empty drum).

DAILY USE

LOADING LAUNDRY.

• Prepare the laundry, following the recommendations given in the section “HINTS AND TIPS”. – Open the door and load the laundry into the drum, without exceeding the maximum load capacities indicated in the Programmed Chart.
• Close the door, pressing until the latch audibly locks, and check that there is no  laundry trapped between the door glass and the rubber seal.

OPEN THE WATER TAP
Check that the washer dryer is connected correctly to the water mains. Open the water tap.

SWITCHING ON THE WASHER DRYER MACHINE.
Press button ; the lamp flashes slowly.

SELECTING A PROGRAMME AND CUSTOMISING A CYCLE. The following functions are possible with this appliance:

• Wash only
• Wash and dry
• Dry only

Wash only
Select the required programmed with the PROGRAMME selector dial. The duration of the wash cycle is shown on the display. The washer dryer machine automatically displays the maximum temperature and spin speed settings possible for the selected programmed. Adjust the temperature and/or spin speed settings if needed with the relative buttons.

• Press button to cycle through progressively lower temperature settings until cold wash is set (“- -“) shown on display.
• Press button to cycle through progressively lower spin speed settings until the spin cycle is turned off (“0” shown on display).
  Pressing the button again sets the highest possible setting.

Select the required options (if necessary).

• Press the button to select the option; the respective button lamp illuminates.
• Press the button again to cancel the option; the lamp extinguishes.

If the selected option is not compatible with the programmed set, an error warning tone sounds and the indicator lamp flashes three times. The option is not selected.

Wash and dry
To wash and dry a load with no interruption between the wash and dry cycles, make sure that the load does not exceed the maximum permissible drying load for the selected programme (see the column “Max. load for drying cycle” in the Programmed chart).

1. Follow the instructions given in the paragraph “Wash Only” to select and, if necessary, customise the required programme.
2. Press to select the required drying mode. Two drying modes are available: automatic or timer.
   • Automatic drying with selectable levels:
     In automatic drying mode, the washer dryer machine dries the laundry until the set level of dryness is reached. Pressing button once automatically selects the highest drying level available for the selected programmed. Press the button again to reduce the drying level.

The following levels are available:
Wardrobe : laundry is completely dry and ready to be put away in the wardrobe without ironing.

Hanger : laundry is left slightly damp to minimize creasing. Garments must be hung to air dry completely. Iron : garments are left reasonably damp to make ironing easier.

• Timer drying mode:

Press button repeatedly to set timer drying mode. After cycling through all the automatic drying levels, continue pressing button until the desired time is displayed. Values from 210 to 30 minutes are settable.

To wash a load of laundry larger than the maximum permissible load for drying (see the column “Max. load for drying cycle” in the Programmed chart), remove a few garments once the washing cycle has finished before starting the drying cycle. Proceed as follows:

1. Follow the instructions given in the paragraph “Wash Only” to select and, if necessary, customize the required programmed.
2. Do not include a drying cycle.
3. Once the washing cycle is finished, open the door and remove a few garments to reduce the load. Now follow the instructions for “Dry only”.

N.B.: always allow a cooling down period after drying before opening the door.

When using the two preset cycles and , it is not necessary to select and start a drying cycle.

Dry only
This function is used to simply dry a wet load washed previously in the washer dryer or by hand.

1. Select a suitable programmed for the laundry you want to dry (e.g. select cotton to dry wet cotton laundry).
2. Press button to dry without a wash cycle.
3. Press to select the required drying mode. Two drying modes are available: automatic or timer.
   • Automatic drying with selectable levels:

In automatic drying mode, the washer dryer machine dries the laundry until the set level of dryness is reached. Pressing button “Drying settings” once automatically selects the highest drying level available for the selected programmed. Press the button again to reduce the drying level.

The following levels are available:
Wardrobe : laundry is completely dry and ready to be put away in the wardrobe without ironing.
Hanger : laundry is left slightly damp to minimize creasing. Garments must be hung to air dry completely. Iron : garments are left reasonably damp to make ironing easier.

• Timer drying mode:

Press button repeatedly to set timer drying mode. After cycling through all the automatic drying levels, continue pressing button until the desired time is displayed. Values from 210 to 30 minutes are settable.
N.B.: always allow a cooling down period after drying before opening the door.

USING THE CORRECT AMOUNT OF DETERGENT.
Pull out the tray and pour detergent into the relative compartments as described in “Detergent dispenser”. This is only necessary when using a wash only or a wash + dry programmed.

DELAYING THE START OF A PROGRAMME.
To set a programmed to start at a later time, see the section “Options and Functions”.

STARTING A PROGRAMME.
Press the START/PAUSE button.
The machine will lock the door ( symbol OFF) and the drum will start to rotate; the door will be unlocked ( symbol on) and then locked again ( symbol OFF) as preparation phase of each washing cycle. The “Clicking” noise is part of the door locking mechanism. Water will enter the drum and start the washing phase once the door is locked.
To change a programmed while a cycle is in progress, press START/PAUSE to pause the washer dryer (the START/ PAUSE lamp flashes amber slowly); then select the required cycle and press START/PAUSE again. To open the door while a cycle is in progress, press START/PAUSE; the door may be opened if the symbol lights. Press the START/PAUSE button again to resume the programmed from where it was paused.

CANCELLING A RUNNING PROGRAMME (IF NECESSARY)
Press and hold the button until the washer dryer stops. If the water level and temperature are low enough, the door unlocks and may be opened.
The door remains locked if there is water in the drum. To unlock the door, switch the washer dryer on, select the programmed and turn the spin function off by setting the spin speed to 0. The water is emptied and the door unlocks at the end of the programmed.

SWITCHING THE WASHER DRYER OFF AT THE END OF A PROGRAMME.
At the end of the cycle, the message “END” is shown on the display. The door can only be opened when the symbol lights. Check that the door unlocked symbol is lit, then open the door and take out the laundry.
Press to switch the washer dryer off. To save energy, if the washer dryer is not switched off manually with the button, it turns off automatically approximately 10 minutes after the end of the programmed.
Leave the door ajar to let the interior of the washer dryer dry.

HINTS AND TIPS

Sort your laundry according to
Type of fabric/care label (cotton, mixed fibers, synthetics, wool, handwasher items). Color (separate cultured and white items, wash new cultured items separately). Delicates (wash small items – like nylon stockings – and items with hooks – like bras – in a cloth bag or pillow case with zip).

Empty all pockets
Objects like coins or lighters can damage your laundry as well as the drum.

Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus detergent in your laundry and it saves money by avoiding waste of surplus detergent

Use low temperature and longer duration
The most efficient programmed in terms of energy consumption are generally those that perform at lower temperatures and longer duration.

Observe the load sizes
Load your Washer Dryer up to the capacity indicated in the “PROGRAMME CHART” table to save water and energy.

Noise and remaining moisture content
They are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.

WASH SYMBOLS
ON GARMENT LABELS
The value given in the tub symbol is the maximum temperature possible for washing the garment.

• Normal mechanical action
• Reduced mechanical action
• Much reduced mechanical action
• Hand wash only
• Do not wash

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch off and unplug the Washer Dryer. Do not use flammable fluids to clean the Washer Dryer.
Clean and maintain your Washer Dryer periodically (at least 4 times per year).

Cleaning the outside of the Washer Dryer
Use a soft damp cloth to clean the outer parts of the Washer Dryer. Do not use glass or general purpose cleaners, scouring powder or similar to clean the control panel – these substances might damage the printing.

Checking the water supply hose
Check the inlet hose regularly for brittleness and cracks. If damaged, replace it by a new hose available through our After-Sales Service or your specialist dealer. Depending on the hose type: If the inlet hose has a transparent coating, periodically check if the color intensifies locally. If yes, the hose may have a leak and should be replaced.

Cleaning the water filter / draining residual water
If you used a hot wash programmed, wait until the water has cooled down before draining any water. Clean the water filter regularly, to avoid that the water cannot drain after the wash due to obstruction of the filter.
Remove the plinth by using the screwdriver: push downwards one side of the plinth with your hand, then push the screwdriver into the gap between plinth and front panel and pry open the plinth.

Place a broad, flat container beneath the water filter, to collect the drain water. Slowly turn the filter counterclockwise until water flows out. Let the water flow out, without removing the filter. When the container is full, close the water filter by turning it in clockwise. Empty the container. Repeat this procedure until all the water has drained. Lay a cotton cloth beneath the water filter, which can absorb a small amount of rest water. Then remove the water filter by turning it out anti clockwise. Clean the water filter: remove residues in the filter and clean it under running water. Insert the water filter and reinstall the plinth: Reinsert the water filter again by turning it in clockwise direction. Make sure to turn it in as far as it goes; the filter handle must be in vertical position. To test water tightness of the water filter, you can pour about 1 liter of water into the detergent dispenser. Then reinstall the plinth.

Cleaning the detergent dispenser
Remove the detergent dispenser by pressing on the release button and at the same time pulling out the detergent dispenser. Remove the insert from the detergent dispenser, as well as the insert of the softener compartment. Clean all parts under running water, removing all detergent or softener residues. Wipe the parts dry with a soft cloth. Reinstall the detergent dispenser and push it back into the detergent compartment.

SAVING ENERGY AND PROTECTING THE ENVIRONMENT

• Keeping within the load limits indicated in the programmed chart will optimize energy, water and detergent consumption and reduce washing times.
• Do not exceed the detergent quantities recommended by the detergent manufacturer.
• Save energy by using a 60°C instead of a 90°C wash programmed, or by using a 40°C instead of a 60°C wash programmed. We recommend using the programmed for cotton garments, which is longer but uses less energy.
• To save energy and time when washing and drying, select highest spin speed available for the programmed to reduce the residual water remaining in the garments at the end of the wash cycle.

PROGRAMME CHART

Maximum load 9 kg Power input in off mode 0.5 W / in left-on mode 8 W| Detergents and Additives| Recommended detergent| Residual| Energy| Total water lt| Laundry
---|---|---|---|---|---|---
Wash cycle| Temperature| ****

Maxi- mum spin(r.p.m.)

| Drying| Max. load for| Max. load for| Duration| Prewash| Wash| Fabric softener| Powder| ** Liquid
Set-ting| Range
| | | |
 MIXED| 40°C|  40°C| 1000| √| 9,0| 6,0| | –| | | –| √| –| –| –| –
 WHITE| 60°C|  90°C| 1400| √| 9,0| 6,0| 2:45| (90°)| | **| √| –| 49| 0,90| 90| 55
 COTTON (2)| 40°C|  60°C| 1400| √| 9,0| 6,0| 3:55| –| **| **| √| √| 49| 1,40| 105| 45
ECO 40-60 (1) (WASH)| 40 °C| 40°C| 1351| √| 9,0| **

6,0

| 3:48| –| | | √| √| 53| 0,73| 59| 35
1351| √| 4,5| 2:54| –| | | √| √| 53| 0,52| 57| 32
1351| √| 2,5| 2:15| –| | | √| √| 53| 0,28| 38| 23
 DELICATES| 30°C|  – 30°C| 600

(****)

| √| 1,0| 1,0| | –| **| **| –| √| –| –| –| –
 SYNTHETICS (3)| 40 °C|  – 60°C| 1200| √| 4,0| 4,0| 2:55| –| **| ****| √| √| 35| 0,8| 55| 43
STEAM REFRESH| –| –| –| –| 2,0| –| *| –| –| –| –| –| –| –| –| –
 SPIN & DRAIN | –| –| 1400| √| 9,0| 6,0| | –| –| –| –| –| –| –| –| –
 RINSE & SPIN| –| –| 1400| √| 9,0| 6,0| | –| –| ****| –| –| –| –| –| –
 RAPID 30’| 30°C|  – 30°C| 1200

(****)

| –| 4,5| –| 0:30| –| | | –| √| 71| 0,20| 45| 27
20°C| 20°C|  – 20°C| 1400| √| 9,0| 6,0| 1:50| –| | | –| √| 49| 0,16| 90| 22
 WOOL| 40 °C|  – 40°C| 800| √| 2,0| 2,0| | –| **| **| –| √| –| –| –| –
WASH & DRY 45’| 30°C| 30°C| 1400| √| 1,0| 1,0| | –| | | –| √| –| –| –| –
WASH & DRY 90’| 30°C| 30°C| 1200| √| 2,0| 2,0| | –| **| **| –| √| –| –| –| –
ECO 40-60 (4) (WASH&DRYING)| **

40 °C

| ****

40°C

| 1351| √| 6,0| 6,0| 9:20| –| | | √| √| 0| 3,80| 75| 33
1351| √| 3,0| 3,0| 5:10| –| | | √| √| 0| 1,98| 47| 32

• √ Selectable/optional
• – Not selectable/applicable
• ****Required quantity
• ****Optional quantity

6th Sense – the sensor technology adapts water, energy and programmed duration to your wash load.

For wash programmed with temperatures above 50°C, we recommend using powder detergent rather than liquid, and following the directions given on the detergent package.

• By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.
  ** The duration of the wash cycles can be checked on the display.
  * After programmed end and spinning with maximum selectable spin speed, in default programmed setting.
  ** The display will show the suggested spin speed as default value.

The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation
to several factors, such as the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected. The values given for programmed other than the Eco 40-60 programmed are indicative only.

1. Eco 40-60 (Wash) – Test wash cycle in compliance with EU Eco-design regulation 2019/2014. The most efficient programmed in terms of energy and water consumption for washing normally soiled cotton laundry.
   Note: spin speed values shown on the display can slightly differs from the values stated in the table.

4. Eco 40-60 (Wash & Drying) – Test wash and drying cycle in compliance with EU Eco-design regulation 2019/2014. To access “wash and dry” cycle select “Eco 40-60” wash programmed and set option level to „ “. The most efficient programmed in terms of energy and water consumption for washing and drying normally soiled cotton laundry. At the end of cycle the garments can be immediately stored to the cupboard.
   For all testing institutes:

2. Long cotton cycle: set programmed at temperature 40°C.
3. Long synthetics cycle: set cycle at a temperature of 40°C.

PROGRAMMES

Follow the directions indicated in the garment wash symbols.

•   MIXED
  For washing lightly to normally soiled resilient garments in cotton, linen, synthetic fibers and mixed fibers.

• WHITE
  For washing normally to heavily soiled towels, underwear, table and bed linen, etc in resilient cotton and linen. Only when the temperature is selected at 90°C the cycle is provided with a prewash phase before main washing phase. In this case it is recommended to add detergent both, in the prewash and main wash section.

• COTTON
  for washing normally to heavily soiled towels, underwear, table and bed linen etc. in resilient cotton and linen.

• ECO 40-60
  For washing normally soiled cotton garments declared to be washable at 40 °C or 60 °C, together in the same cycle. This is the standard cotton programmed and the most efficient in terms of water and energy consumption.

• DELICATES
  for washing particularly delicate garments. Preferably turn garments inside out before washing.

• SYNTHETICS
  for washing normally soiled garments made from synthetic fibers (such as polyester, polyacrylic, viscose etc.) or cotton/synthetic blends.

• STEAM REFRESH
  for refreshing garments, neutralized unpleasant odors and relaxing the fibers by delivering steam into the drum. The garments will be damp at the end of the cycle.

• SPIN & DRAIN
  spins the load then empties the water. For resilient garments.

• RINSE & SPIN
  rinses and then spins. For resilient garments.

• RAPID 30’
  for washing lightly soiled garments quickly: this cycle lasts only 30 minutes, saving time and energy. Maximum load 4,5 Kg.

• 20°C
  For washing lightly soiled cotton garments, at a temperature of 20 °C.

• WOOL
  All wool garments can be washed using programmed ‚“Wool“ even those carrying the “hand-wash only “ label. For best results, use special detergents and do not exceed max kg declaration of laundry.

• WASH & DRY 45’
  for washing and drying lightly soiled cotton and synthetic fiber garments quickly. This cycle washes and dries a laundry load of up to 1 Kg in just 45 minutes.

• WASH & DRY 90’
  for washing and drying cotton and synthetic fiber garments quickly. This cycle washes and dries a laundry load of up to 2 Kg in just 90 minutes.

OPTIONS AND FUNCTIONS

OPTIONS selectable directly by pressing the relative button
If the selected option is not compatible with the programmed set, an error warning tone sounds and the indicator lamp flashes three times. The option is not selected.

FRESHCARE+
If associated with wash cycles, this option increases their performances by generating steam to block proliferation of the main sources of unpleasant odours inside the appliance (exclusively for the wash). After the steam phase, the machine runs a delicate cycle with slow drum rotations. When the FRESHCARE+ option is associated with drying cycles, it prevents stubborn creases from stabilising on garments, thanks to slow drum rotations.
The Fresh Care+ cycle starts at the end of the wash or drying cycle and continues for maximum 6 hours; it can be interrupted at any time by pressing any button on the control panel, or by turning the knob. Wait roughly 5 minutes before opening the door.

START DELAY
To set the selected programmed to start at a later time, press
the button to set the desired delay time. The h. symbol lights on the display when this function is enabled. To cancel the delayed start, press the button again until the value “0” is shown on the display.

LOCK BUTTON
to lock the control panel, press and hold the button for approximately 3 seconds. the symbol lights on the display to indicate that the control panel is locked (with the exception of the button). This prevents unintentional changes to programmed, especially with children near the machine.
If any attempt is made to use the control panel, the symbol
flashes on the display.
To unlock the control panel, press and hold the button approximately 3 seconds.

Regulatory documentation, standard documentation, ordering spare parts and other product information can be found:

• By visiting our website docs .whirlpool.eu and parts – self-service.whirlpool.com
• Using QR code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.

For User’s Repair & Maintenance Information visit www.whirlpool.eu
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu

References

• | Whirlpool Europe
• Register | Whirlpool Europe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>