NEMO STUDIO 1005 Slackline Trim Recessed Indoor Linear Instruction Manual

June 5, 2024
NEMO STUDIO

NEMO STUDIO 1005 Slackline Trim Recessed Indoor Linear

Box contents

NEMO STUDIO 1005 Slackline Trim Recessed Indoor
Linear-1

Dimensions

NEMO STUDIO 1005 Slackline Trim Recessed Indoor
Linear-2
(mm)

Example of connection (Parallel connection)

Verify the input tension supported from drivers.

LED Drivers not included
DRIVER 24V

Specifications
IN24VDC

Installation

NEMO STUDIO 1005 Slackline Trim Recessed Indoor
Linear-4

  • Installation should be carried out by a suitable qualified installer.
  • Make the wiring using a system that guarantees at least the IP grade of the lamp
  • Connect the fitting to the power supply only afte connecting all LED to the driver.
  • the terminal block not included
  1. Make a linear groove of 23/25 mm and with a length equal to the luminaire.
  2. Connect luminaire in parallel and insert them in the groove.

Installation for èlasterboard application

  1. Make a linear groove of 22,5/25 mm and with a length equal to the luminaire.NEMO STUDIO 1005 Slackline Trim Recessed Indoor Linear-7NEMO STUDIO 1005 Slackline Trim Recessed Indoor Linear-9
  2. Connect luminaire in parallel and insert them in the groove.

Fixing kit for plasterboard (not included)

CAUTION

INDOOR LUMINAIRE
Installation should be carried out by a suitable qualified installer.
Disconnect main voltage before maintenace operation All wiring and maintenance must be performed with the main switch in the OFF position Don’t open t luminaire.
Connect the fitting to the power supply only after connecting al LED to the driver (when expected)  In case of failure, upon a return authorization of NEMO Studio the product will be not neither open or dismounted Make the wiring using a system that guarantees at least the IP grade of the spot.
Se previsto, use only bulbs of suitable type and power specified in the label Do not install fixture in environment with presence o chlorine, salt air or aggressive agents, if not expressly mentioned.
The color temperature (CCT) of LED sources can be different from the declared nominal value within a range of ±5%.  NEMO reserves the right to make any technical or formal alterations to its products without giving prior notice, especially for LED sources.  We recommend you to keep instructions for further consultations.

EQUIPMENT DISPOSAL
This lamp has been manufactured according to Directive EU 2012/19/EU.
In accordance with EU Directive
WEEE (Waste Electrical and Electronic Equipment), luminaire must not be disposed of with other household waste. At the end of their life, luminaires must be taken to th appropriate local facility available for the disposal or recycling of electronic products.

LIGHTING CLEANING SAFETY INSTRUCTIONS

Periodically clean the surface of the spot. Before starting, switch the light off.
For Plastic parts – Glass -Painted parts:

  • Remove the dust surface layer with latex gloves and soft electrostatic lint-free cloth.
  • Clean with a soft and moist cloth with circular movements.
  • Avoid using aggressive detergents.
    Use only neutral products (PH 7).
    Note: for plastic parts use onl antistatic alcohol-free soap. Fo aluminum parts, clean with a soft cloth.

This luminaire contains built-in LED lamps.
The LED and the cables cannot be changed in the luminaire from the end- user.Please contact NEMO STUDIO (only authorized center).
This product contains a light source of energy efficiency class (EEC=E for 4000K version) (EEC=F for 3000K/2700K version)

NEMO STUDIO 1005 Slackline Trim Recessed Indoor
Linear-10

Ilti Luce Srl – Strada Borgata Paradiso 20 – 10036 Settimo Torinese (TO) ITALY Tel +39 011 765730 nemostudio@nemolighting.comnemolighting.com
Copyright © 2020 NEMO Srl Milano, Italia.
The text and images are protected by copyright.
Unauthorized reproduction

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals