NEMO STUDIO LUX INDOOR Indoor Spot Instruction Manual

NEMO STUDIO LUX INDOOR Indoor Spot

Box contents

Installation

• the terminal block not included
• Connect the fitting to the power supply only after connecting all LEDs to the driver
• installation should be carried out by a suitable quality installer.
• Make the wiring using a system that guarantees at least the IP grade of the spot.

Installation

Spring fixation

1. To drill with a diameter of 16
2. To press the end of spring
3. To insert the spotlight in the hole

Fixing with ring nut

1. To extract the spring
2. To insert the spotlight in the hole
3. Screw the ring nut

**Example of connection (serial connection)

**

CAUTION
INDOOR LUMINAIRE Installation should be carried out by a suitable quality installer. / Disconnect main voltage before maintenance operation / All wiring and maintenance must be performed with the main switch in the OFF position / Don’t open the luminaire.
Connect the fitting to the power supply only after connecting all LED to the driver (when expected) / In case of failure, upon a return authorization of NEMO Studio, the product will be not neither open or dismounted / Make the wiring using a system that guarantees at least the IP grade of the spot. /
Se previsto, use only bulbs of a suitable type and power specified in the label / Do not install fixture in an environment with presence of chlorine, salt air or aggressive agents, if not expressly mentioned. / The color temperature (CCT) of LED sources can be different from the declared nominal value within a range of ±5%. / NEMO reserves the right to make any technical or formal alterations to its products without giving prior notice, especially for LED sources. / We recommend you to keep instructions for further consultations.

EQUIPMENT DISPOSAL

This lamp has been manufactured according to Directive EU 2012/19/EU.
In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.

LIGHTING CLEANING SAFETY INSTRUCTIONS

Periodically clean the surface of the spot. Before starting, switch the light off.
For Plastic parts – Glass -Painted parts:

• Remove the dust surface layer with latex gloves and soft electrostatic lint-free cloth.
• Clean with a soft and moist cloth with circular movements.
• Avoid using aggressive detergents. Use only neutral products (PH 7). Note: for plastic parts use only antistatic alcohol-free soap. For aluminum parts, clean with a soft cloth.

Lamping

• Questo apparecchio contiene lampade a LED integrate.
  This luminaire contains built-in LED lamps.

• Il LED non può essere sostituito dall’utente finale Rivolgersi a NEMO STUDIO (unico centro autorizzato).
  The LED cannot be changed in the luminaire from the end-user.Please contact NEMO STUDIO (only authorized center).

• Questo prodotto contiene una sorgente luminosa di classe di efficienza energetica (5000K) – (2700-4000K) This product contains a light source of energy efficiency class (5000K) – (2700-4000K)

NEMO Studio
Ilti Luce Srl – Strada Borgata Paradiso 20 – 10036 Settimo Torinese (TO) ITALY Tel +39 011 7657301
nemostudio@nemolighting.com – nemolighting.com
Copyright © 2020 NEMO Srl Milano, Italia.
The text and images are protected by copyright.
Unauthorized reproduction.

References

• NEMO LIGHTING Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>