NEMO STUDIO ZIRKOL C-WALL Pendant Light Instruction Manual
- June 5, 2024
- NEMO STUDIO
Table of Contents
NEMO STUDIO ZIRKOL C-WALL Pendant Light
Box contents
Installation
Requirements for attaching the light to the wall:
- The light point hole has to be less than Ø12mm
- The cable coming out of the light point should be at least 30 cm, max 2x1mm
- Disconnect the electrical power before to install the lamp and draw the fixing point using the Zirkol like a Dima Example of connection Parallel connection
- Insert the cables that comes out of the wall inside the thermo-shrinking sheath
- Make the holes for the dowels in the correct position
- Insert the wall exit cable inside the clip before screwing it on
- Tighten the fixing clips to the wall
- Tighten the tigi to the hexagon that comes out of the luminaire with a wrench
- Insert the electrical cable inside the tige
- Slide the screens to make the electrical connection
- Slide the screens to make the electrical connection
- Tighten the tigi to the clips making grip on the hexagon that comes out
- Make the electrical connection to the lamp
- Reposition the screen
CAUTION
INDOOR LUMINAIRE
Installation should be carried out by a suitably qualified installer. /
Disconnect main voltage before maintenance operation / All wiring and
maintenance must be performed with the main switch in the OFF position / Don’t
open the luminaire.
Connect the fitting to the power supply only after connecting all LED to the
driver (when expected) / In case of failure, upon a return authorization of
NEMO Studio, the product will be not either open or dismounted / Make the
wiring using a system that guarantees at least the IP grade of the spot. /
Se previsto, use only bulbs of suitable type and power specified in the label
/ Do not install fixture in an environment with the presence of chlorine, salt
air or aggressive agents, if not expressly mentioned. / The color temperature
(CCT) of LED sources can be di˝er-ent from the declared nominal value within a
range of ±5%. / NEMO reserves the right to make any technical or formal
alterations to its products without giving prior notice, especially for LED
sources. / We recommend you to keep instructions for further consultations.
EQUIPMENT DISPOSAL
This lamp has been manufactured according to Directive EU 2012/19/EU.
In accordance with EU Directive WEEE (Waste Electrical and Electronic
Equipment), luminaires must not be disposed of with other household waste. At
the end of their life, lumi-naires must be taken to the appropriate local
facility available for the disposal or recycling of electronic products.
LIGHTING CLEANING SAFETY INSTRUCTIONS
Periodically clean the surface of the spot. Before starting, switch the light
o˝.
For Plastic parts – Glass -Painted parts:
- Remove the dust surface layer with latex gloves and soft electrostatic lint-free cloth.
- Clean with a soft and moist cloth with circular movements.
- Avoid using aggressive detergents. Use only neutral products (PH 7).
Note: for plastic parts use only antistatic alcohol-free soap. For aluminum parts, clean with a soft cloth.
Lamping
-
Questo apparecchio contiene lampade a LED integrate.
This luminaire contains built-in LED lamps. -
Il LED, il cavo di alimentazione e il driver non possono essere sostituiti dall’utente finale Rivolgersi a NEMO STUDIO (unico centro autorizzato).
The LED, the cables and the driver cannot be changed in the luminaire from the end-user.Please contact NEMO STUDIO (only authorized center). -
Questo prodotto contiene una sorgente luminosa di classe di e˙cienza energetica
(EEC=D per versione 4000K)
This product contains a light source of energy e˙ciency class(EEC=D for 4000K version)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>