NEMO STUDIO UZRO16A20G15 Zirkol O-D LED Pendant Instruction Manual
- June 5, 2024
- NEMO STUDIO
Table of Contents
NEMO STUDIO UZRO16A20G15 Zirkol O-D LED Pendant
Box contents
Installation
Downlight
- Split
- Electrical cable
- Iron cable
- Disconnect the electrical power before to install the lamp and draw the suspension points Example of connection
- Make the holes for the dowels in the correct position
- Fix the lamp with wall dowels (not included) and the little roses.
- Fix the lamp with the wire gripper
- Connection to residential wire ( wires that come out from the canopy)
- Drill the holes for the dowels in the correct position.
- Insert the power cable in turret 1 of the canopy
- Canopy closure
- Remove electrical cables
- Unscrew the canopy
CAUTION
INDOOR LUMINAIRE Installation should be carried out by a suitable quality
installer. / Disconnect main voltage before maintenance operation / All wiring
and maintenance must be performed with the main switch in the OFF position /
Don’t open the luminaire.
Connect the fitting to the power supply only after connecting all LED to the
driver (when expected) / In case of failure, upon a return authorization of
NEMO Studio, the product will be not either open or dismounted / Make the
wiring using a system that guarantees at least the IP grade of the spot. /
Se previsto, use only bulbs of a suitable type and power specified in the label
/ Do not install fixture in an environment with the presence of chlorine, salt
air or aggressive agents, if not expressly mentioned. / The color temperature
(CCT) of LED sources can be differ-ent from the declared nom-inal value within
a range of ±5%. / NEMO reserves the right to make any technical or formal
alterations to its products without giving prior notice, especially for LED
sources. / We recommend you to keep instruc-tions for further consultations.
- Remove the dust surface layer with latex gloves and soft electrostatic lint-free cloth.
- Clean with a soft and moist cloth with circular movements.
- Avoid using aggressive detergents. Use only neutral products (PH 7).
Note: for plastic parts use only antistatic alcohol-free soap. For aluminum parts, clean with a soft cloth.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>