NEMO STUDIO B-HF Zirkol Downlight Instruction Manual
- June 5, 2024
- NEMO STUDIO
Table of Contents
NEMO STUDIO B-HF Zirkol Downlight
Box contents
Parallel connection
Example of connection
Installation
1M Downlight / Up-Downlight
- Split
- Electrical cable
- Iron cables
1,5M Downlight / Up-Downlight
- Split
- Electrical cable
- Iron cables
-
Scollegare l’alimentazione elettrica prima di installare la lampada e disegnare i punti di sospensione Disconnect the electrical power before installing the lamp and draw the suspension points.
With the accessories, CANOPY, and CEILING PLATE the power supply must be installed in the false ceiling. -
Effettuare fori per i tasselli nella posizione corretta Make the holes for the dowels in the correct position.
-
Fissare la lampada con tasselli (non inclusi) e con i rosoncini. Fix the lamp with wall dowels (not included) and the little roses.
-
Fissare la lampada tramite i cavi e i gripper Fix the lamp with the wire gripper
-
Effettuare la connessione elettrica come lo schema Make the electrical connections like the wiring diagram.
- Rosone noninclusive ceiling rose not included.
- Istruzioni fornite con gli accessori di riferimento Instructions supplied with reference accessories.
CAUTION
INDOOR LUMINAIRE Installation should be carried out by a suitable quality
installer. / Disconnect main voltage before maintenance operation / All wiring
and maintenance must be performed with the main switch in the OFF position /
Don’t open the luminaire. Connect the fitting to the power supply only after
connecting all LED to the driver (when expected) / In case of failure, upon a
return authorization of NEMO Studio, the product will be not either open or
dismounted / Make the wiring using a system that guarantees at least the IP
grade of the spot. / Se previsto, use only bulbs of a suitable type and power
specified in the label / Do not install fixture in an environment with the
presence of chlorine, salt air, or aggressive agents, if not expressly
mentioned. / The color temperature (CCT) of LED sources can be different from
the declared nominal value within a range of ±5%. / NEMO reserves the right to
make any technical or formal alterations to its products without giving prior
notice, especially for LED sources. / We recommend you keep instructions for
further consultations.
EQUIPMENT DISPOSAL
This lamp has been manufactured according to Directive EU 2012/19/EU.
In accordance with EU Directive WEEE (Waste Electrical and Electronic
Equipment), luminaires must not be disposed of with other household waste. At
the end of their life, luminaires must be taken to the appropriate local
facility available for the disposal or recycling of electronic products.
LIGHTING CLEANING SAFETY INSTRUCTIONS
Periodically clean the surface of the spot. Before starting, switch the light
off.
For Plastic parts – Glass -Painted parts:
- Remove the dust surface layer with latex gloves and soft electrostatic lint-free cloth.
- Clean with a soft and moist cloth with circular movements.
- Avoid using aggressive detergents. Use only neutral products (PH 7).
Note: for plastic parts use only antistatic alcohol-free soap. For aluminum parts, clean with a soft cloth.
Lamping
- Questo apparecchio contiene lampade a LED integrate. This luminaire contains built-in LED lamps.
- Il LED, il cavo di alimentazione e il driver non possono essere sostituiti dall’utente finale Rivolgersi a NEMO STUDIO (unico centro autorizzato).
- The LED, the cables, and the driver cannot be changed in the luminaire from the end-user. Please contact NEMO STUDIO (the only authorized center).
- Questo prodotto contiene una sorgente luminosa di classe di efficienza energetica
(EEC=D per versione 2700K 3000K 4000K). This product contains a light source of energy efficiency class (EEC=D for 2700K 3000K4000K version).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>