NEMO STUDIO LUX W- S Outdoor Spot Instruction Manual
- June 5, 2024
- NEMO STUDIO
Table of Contents
NEMO STUDIO LUX W- S Outdoor Spot
Box contents
Installation
- Installation should be carried out by a suitable quality installer.
- Make the wiring using a system that guarantees at least the IP grade of the spot.
- Connect the fitting to the power supply only after connecting all LEDs to the driver
- Remove the 3 fixing screws of the base.
- Remove the base in order to fix it to the wall with wall dowels (not included).
- After calculating the distance, make 2 holes in the wall and insert the 2 rawlplugs and appropriate screws. Connect the lamp to the primary circuit (230V) through the internal appropriate connection box Class II (included).
Example of connection ( parallel connection)
OUTDOOR LUMINAIRE
Installation should be carried out by a suitable qualified installer. /
Disconnect main voltage before maintenace operation / All wiring and
maintenance must be performed with the main switch in the OFF position / Don’t
open the luminaire.
Connect the fitting to the power supply only after connecting all LED to the
driver (when expected) / In case of failure, upon a return authorization of
NEMO Studio, the product will be not neither open or dismounted and the cable
must be cut leaving at least 10/15cm / Make the wiring using a system that
guarantees at least the IP grade of the spot. /
Se previsto, use only bulbs of suitable type and power specified in the label /
Do not install fixture in environment with presence of chlorine, salt air or
aggressive agents, if not expressly mentioned. / The color temperature (CCT)
of LED sources can be different from the declared nominal value within a range
of ±5%. / NEMO reserves the right to make any technical or formal alterations
to its products without giving prior notice, especially for LED sources. / We
recommend you to keep instructions for further consultations.
-For a proper operation, the fitting requires its protective undamaged glass.
EQUIPMENT DISPOSAL
This lamp has been manufactured according to Directive EU 2012/19/EU. In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
LIGHTING CLEANING SAFETY INSTRUCTIONS
It is essential to clean the luminaire periodically at regular intervals to remove the dust, dirt, limestone or other contaminations.
Before cleaning the luminaire, switch off the power supply and let it cool down. Not maintaining the luminaires may result in malfunctioning. Clean the luminaires using a soft cloth damped in lukewarm water. Do not use cleaning products which contain acidic substances. Do not use cleaner machines. Luminaires must not be used in corrosive environments, exposure to corrosive substances must always be avoided. Do not use grainy detergent and/or rough or abrasive sponges. Contact NEMO in case of doubts regarding lamp cleaning.
Lamping
- This luminaire contains built-in LED lamps.
- Il LED e il cavo di alimentazione non possono essere sostituiti dall’utente finale. Rivolgersi a NEMO STUDIO (unico centro autorizzato). The LED and the cables cannot be changed in the luminaire from the end-user.Please contact NEMO STUDIO (only authorized center).
- This product contains a light source of energy efficiency class
- - Don’t look directly at the light source
NEMO Studio
Ilti Luce Srl – Strada Borgata Paradiso 20 – 10036 Settimo Torinese (TO) ITALY
Tel +39 011 7657301
nemostudio@nemolighting.com –
nemolighting.com
Copyright © 2020 NEMO Srl Milano, Italia.
The text and images are protected by copyright.
Unauthorized reproduction.