OPTONICA 9058 Hanging Fixture GU10 MR16 Fitting Black And White Body User Manual
- June 5, 2024
- OPTONICA
Table of Contents
USER MANUAL
Installation
SKU: 9058
- Hangind board
- Screw
- Ceiling plate
- Cable
- Lamp body
SKU: 9072
- Hangind board
- Screw
- Ceiling plate
SKU: 9062, 9064
Installation instructions:
- Please cut off the power supply before starting installation.
- Open the package, remove the lamp body, and check whether the lamp body is damaged.
- Attach the plate to the ceiling and connect the power cord.
- Adjust the appropriate height of the lamp body. Install the bulb (not exceeding the maximum power) to ensure that the lamp body is firmly installed.
Matters needing attention:
- Install the lamp body with cotton gloves to avoid scratching the lamp body.
- The lampshade is fragile. Please install it carefully.
- If there is a problem with the lamp, please have it repaired by a professional.
- The power supply should not exceed the specified range (rated voltage 220V, frequency 50 Hz). A long time working in a non-rated voltage range, will lead to lamp damage.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>