OPTONICA 6279 DIN RAIL Power Supply User Manual

OPTONICA 6279 DIN RAIL Power Supply

Specifications

Product Usage Instructions

Installation
This product is designed to fit DIN rail TS35/7.5 or TS35/15. Follow the installation instructions provided in the manual.

Connection
Connect the input and output terminals as per the terminal pin assignment mentioned in the manual.

Powering On
After installation and connection, apply power to the unit within the specified voltage range for optimal performance.

FAQ

• Q: What is the warranty period for this product?
  A: The product comes with a 2-year warranty.

• Q: What is the efficiency of the power supply?
  A: The efficiency is typically 88.5% for certain models and 90% for others.

For SKU: 6279 and SKU: 6280

Features

• Universal AC input / Full range
• Built-in active PFC function
• Protections: Short circuit / Overload / overtemperature
• Cooling by free air convection
• Can be installed on DIN rail TS-35/7.5 or 15
• UL 508 (industrial control equipment) approved
• BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
• 100% full load burn-in test
• 2 years warranty

Applications

• Industrial control system
• Semi-conductor fabrication equipment
• Factory automation
• Electro-mechanical

Description

SKU:6279 /6280 is one economical slim 240W Din rail power supply series, adapt to installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 32mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to BS EN/EN61000-3-2, the norm the European union regulates for harmonic current. SKU:6279 /6280 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 89%, the entire series can operate at the ambient temperature between -20°C and 70°C under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive control apparatus (UL508, TUV BS EN/EN62368-1, and etc.) make SKU:6279 /6280 a very competitive power supply solution for industrial applications.

Model Encoding

SPECIFICATION

OUTPUT

| DC VOLTAGE| 12V| 24V
RATED CURRENT| 10A| 5A
CURRENT RANGE| 0 ~ 20A| 0 ~ 10A
RATED POWER| 240W| 240W
RIPPLE & NOISE (max.) **Note.2| 150mVp-p| 150mVp-p
VOLTAGE ADJ. RANGE| 12 ~ 14V| 24 ~ 28V
VOLTAGE TOLERANCE Note.3| ±1.0%| ±1.0%
LINE REGULATION| ±0.5%| ±0.5%
LOAD REGULATION| ±1.0%| ±1.0%
SETUP, RISE TIME| 1500ms, 100ms/230VAC               000ms, 100ms/115VAC at full load
HOLD UP TIME (Typ.)**| 28ms/230VAC              2ms/115VAC at full load

INPUT

| VOLTAGE RANGE Note.4| 90 ~ 264VAC             27 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF>0.98/115VAC, PF>0.95/230VAC at full load
EFFICIENCY (Typ.)| 88.5%| 90%
AC CURRENT (Typ.)| 2.5A/115VAC              .3A/230VAC
INRUSH CURRENT (Typ.)| 20A/115VAC             5A/230VAC
LEAKAGE CURRENT| <1mA / 240VAC

PROTECTION

| OVERLOAD| 105 ~ 130% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 29 ~ 33V| 56 ~ 65V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

| WORKING TEMP.| -20 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

SAFETY & EMC

(Note 4)

| SAFETY STANDARDS| UL508, TUV BS EN/EN62368-1, EAC TP TC 004, BSMI CNS14336-1, IS13252(Part1)/IEC60950-1 approved ;(meet BS EN/EN60204-1)
WITHSTAND VOLTAGE| I/P-O/P:3KVAC  I/P-FG:2KVAC  O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020, CNS13438
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61000-6-2 (BS EN/EN50082-2),

BS EN/EN61204-3, heavy industry level, EAC TP TC 020

OTHERS

| MTBF| 1645.2K hrs min.       Telcordia SR-332 (Bellcore) ; 230.2K hrs min.        MIL-HDBK-217F (25℃)
DIMENSION| 63125.2113.5mm (WHD)
PACKING| 1Kg; 12pcs/13Kg/1.22CUFT
NOTE| All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor.
Tolerance : includes set up tolerance, line regulation and load regulation.
Derating may be needed under low input voltage. Please check the derating curve for more details.
Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.
In case the adjacent device is a heat source, 15mm clearance is recommended.
The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than

Block Diagram

Derating Curve

Output derating VS input voltage

Mechanical Specification

Installation Instruction

This series fits DIN rail TS35/7.5 or TS35/15.
For installation details, please refer to the Instruction manual.

IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>