Jura GIGA X9C Professional Coffee Maker Machine Instruction Manual

[

](https://manuals.plus/wp- content/uploads/2022/07/Jura.png)

Jura GIGA X9C Professional Coffee Maker Machine[

](https://manuals.plus/wp- content/uploads/2022/07/Jura-GIGA-Professional-Coffee-Maker- Machine.png)Control elements

[

](https://manuals.plus/wp-content/uploads/2022/07/jura-GIGA-X8 -Automatic-Coffee-Machines-1.png)

1. Bean container with aroma preservation cover
2. Bean container status indicator
3. Water tank cover
4. Water tank
5. Power switch and plug-in mains cable   (back of the machine)
6. Professional steam lance  (pivoting)
7. Coffee grounds container
8. Drip tray
9. Cup grille
10. Filler funnel for ground coffee
11. Ventilation slats (Venti Ports)
12. Storage compartment cover
13. Measuring spoon for ground coffee
14. Height- and width-adjustable dual spout
15. Splash guard
16. Height-adjustable hot-water spout

Top of the machine

1. On/Off button

2. Rotary Switch

3. P button (programming)
   Front

4. Display

5. Multi-function buttons (button function depends on what is shown in the display)

Back of the machine

1. Service cover  (open by pressing with your finger)
2. Locking device
3. Sliding catch
4. Service socket (underneath cover)

Cleaning Products – GIGA X9 (Tank water)

Daily

See procedure – Daily milk system clean
Must be performed at the end of each day just before the machine is turned off
Purpose: To ensure the milk system is clean overnight so milk does not go off blocking the pathways

Weekly

See procedure – Weekly milk system clean
Performed once per week
Purpose: To remove any build up of milk fats to ensure the milk frother works correctly
Use Cafetto weekly milk cleaner – 1 litre bottle (Prod no. 71145)

When prompted

Clean machine – See procedure (Coffee system clean)
Performed only when prompted (Every 200 coffees)
Purpose: Removes coffee oil from the brewing unit and coffee path to maintain the quality of the coffee Use Jura cleaning tablets

• 6 pk (Prod no. 71111)
• 25 pk (Prod no. 71112)

See procedures – Changing the filter or Descaling the machine
Perform a filter change or descale only when prompted.
Purpose: Protects against lime scale build up inside the machine maintaining water & steam paths

GIGA X9c Professional Daily milk system clean [](https://manuals.plus/wp-

content/uploads/2022/07/jura-GIGA-X8-Automatic-Coffee-Machines-9.png)

• Prod no. 71144 OR Prod no. 71150
• Mini tabs Prod no. 71150

Daily cleaning procedure – Steam wand

The steam wand must be dismantled and cleaned daily to ensure it operates correctly

1. Remove the steam wand outer section – turn clockwise. (Fig 2)
2. Remove the steam wand inner section – turn clockwise. (Fig 3) If they are tight use the tool provided.
3. Soak steam wand in 500ml of hot water and ¼ scoop of Cafetto Inverso milk cleaner for 30min. (Fig 4)
4. Clean the temperature probe. (Fig 5)
5. Remove the steam wand from solution and rinse under tap water. (Fig 6)
6. Clean the steam wand inner & outer sections using the brushes provided. (Fig 7 & 8)
7. Re-assemble the steam wand (turn anti-clockwise), inner section followed by outer section. (Fig 9 & 10)

Please note: If the steam wand is not cleaned daily it will not operate correctly and can be damaged.

Weekly milk system clean

Complete this procedure once a week after the daily milk system clean

1. Remove the splash guard. (Fig 1)
2. Remove spout cover. Press the black releasing buttons and lift. (Fig 2 – 3)
3. Pull the milk outlet down (Fig 4) and the milk hose out. (Fig 5)
4. Remove the auto frother by pulling it towards you. (Fig 6)
5. Separate the auto frother into 6 parts. (Fig 7)
6. Soak all 6 parts in 250ml of warm water & 15ml of Cafetto red weekly solution (71145) for 20 min.
7. Remove the parts from solution and rinse under cold tap water.
8. Check that water flows through the milk outlet freely. (Fig 8)
9. Re-assemble the auto frother ensuring the arrow tips line up. (Fig 9)
10. Refit the auto frother, spout cover and splash guard.

Important: The splash guard protects the coffee spout slide ribbon behind it from milk splatters and must be fitted. Be careful not to press on the coffee spout slide ribbon as it can be damaged.

Coffee system clean

Approximate duration 20 min.
3-phase-cleaning tablets Prod no. 71112 25pcs OR Prod no. 71111 6pcs

Descaling the machine[](https://manuals.plus/wp-content/uploads/2022/07

/jura-GIGA-X8-Automatic-Coffee-Machines-17.png)

Approximate duration 50 min.
Descaling tablets Prod no. 71122

Troubleshooting:

Milk flow
No milk Spluttering milk Not filling cups Froth milk is flat Solution:

1. Remove the splash guard. (Fig 1)
2. Press the black releasing buttons on the sides of the spout cover and lift the cover off. (Fig 2 – 3)
3. If the flat milk is flowing normally and the problem is with the froth milk only, replace the air suction (Fig 4), refit the cover and test the milk again. If the problem has been solved, purchase spare air suction (Part no. 70008). If the problem has not been solved go to step 4.
4. Remove the auto frother by pulling the milk outlet down (Fig 5) and pulling the milk hose connector out (Fig 6). Now you will be able to remove the auto frother by pulling it towards you (Fig 7).
5. Separate the auto frother into 6 parts (Fig 8).
6. Soak 6 parts (Fig 8) in 250ml of warm water and 15 ml of Cafetto red weekly cleaning solution (71145) for 30 min.
7. Remove the parts from the solution and rinse under tap water.
8. Clean the milk, air and steam paths using the cleaning brushes. See 2 x milk path holes in Fig 11.(Fig 9 – 13)
9. Pour tap water into the top of the milk outlet (Fig 14). If water does not pour from the two outlets as shown, soak it for another 30 min and retest. If you are not able to clean the outlet, order in another outlet. (Part no. 70007)
10. Re-assemble the auto frother ensuring that the arrow tips line up. (Fig 15)
11. Refit the auto frother, cover, splash guard and test. If the problem has not been solved ph 1300 365 487.

Welcome to My Coffee Shop!

Our hours of operation are Monday – Friday 9am to 5pm. Or you can visit us at your convenience on the web at www.mycoffeeshop.com.au. Orders and service requests can be placed by:

• Phone: 1300 365 487
• Fax: 02 9692 8046
• E-mail: clientservices@mycoffeeshop.com.au 
• Online: www.mycoffeeshop.com.au/shop-online 
• Remittances: accountsreceiveable@mycoffeeshop.com.au 
• Service enquiries: servicecentre@mycoffeeshop.com.au

Next business day delivery via courier to:

Adelaide Canberra Melbourne Sydney for product orders placed by 1.30pm
Please note you will be advised when ordering if delivery charges apply to your order
Once again, welcome to My Coffee Shop and remember we are here to help. If you have any questions please don’t hesitate to contact us.
We look forward to exceeding your expectations and making your day easier and more enjoyable.
Kind regards,
My Coffee Shop
Client Services
My Coffee Shop Pty Ltd
My Coffee Shop Pty Ltd ACN 102 850 037
390 Johnston St Abbotsford VIC 3067 ph: 03 9946 4160
97 / 1-5 Harwood St Pyrmont NSW 2009 ph: 02 9034 6580

References

• Buy JURA coffee machines online - JURA United Kingdom
• Coffee Machines and Coffee Beans for Office and Home | My Coffee Shop
• Shop by Category - mycoffeeshop.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>