OPTONICA 15401 Track Fixing Part Linear Light User Manual
- June 1, 2024
- OPTONICA
Table of Contents
USER MANUAL SKU:15401
15401 Track Fixing Part Linear Light
-
Link Track & Driver by L/N poles (reference below instruction)
-
Reference below photos to assemble the track fixing parts.
-
Assemble the track, Pull it in Straight in flattening.
-
Assemble the Fixtures
Attention:
- Loosen the cap of the fixing fixture,then adjust the flexible track.
- Loosen connection cap of the lamp,then move it for adjustment.
- The weight of all lamps between two fixing should ≤3KG.
- The total power of lamps shall not exceed 80% of driver’s power. Please make sure driver output is same as fixture input(DC48V/ DC24V)before install the lamps.
- Don’t pull the flexible track after installation.
- Note: Different spatial shapes are determined by the location of the fixed point, which should be installed according to the design drawing.
- Due to voltage drop considerations, the track length from the driver to the terminal end to a maximum of 15 meters.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Soa, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>