OPTONICA 5550 LED Tube T5 With Switch Linkable Plastic User Manual

June 1, 2024
OPTONICA

OPTONICA 5550 LED Tube T5 With Switch Linkable Plastic

OPTONICA 5550 LED Tube T5 With Switch Linkable Plastic User
Manual

General information.

  • The unit consists of plastic body with a diffusor and on/off switch.
  • The power supply is designed via the mains with nominal 220v, 50 Hz.
  • This unit is designed for domestic, office or manufacturing premises.
  • Dimension shown as on Picture 1
    Dimension

Technical Specifications.

  • Power supply 220-240V~50/60 Hz;
  • LED type: SMD 2835 LED;
  • Electric power protection class – – II;
  • Ingress protection rate – IP20.

SKU:| Power, W| Light Color| Flux, lm| Max Units in line up to 30m| LEDs Number| Beam Angle| Ra| Size mm
---|---|---|---|---|---|---|---|---
5550,5551,5552| 4W| 6000K/4000K/2700K| 320lm| 100| 22| 120º| >80| 305x22x32
5553,5554,5555| 8W| 6000K/4000K/2700K| 640lm| 50| 40| 570x22x32
5556,5557,5558| 12W| 6000K/4000K/2700K| 960lm| 33| 60| 870x22x32
5559,5560,5561| 16W| 6000K/4000K/2700K| 1280lm| 25| 80| 1170x22x32
5562,5563,5564| 20W| 6000K/4000K/2700K| 1600lm| 20| 100| 1470x22x32
5565,5566,5567| 4W| 6000K/4000K/2700K| 320lm| 100| 22| 305x22x32
5568,5569,5570| 8W| 6000K/4000K/2700K| 640lm| 50| 40| 570x22x32

5571,5572,5573

| 12W| 6000K/4000K/2700K| 960lm| 33| 60| 870x22x32

5574,5575,5576

| 16W| 6000K/4000K/2700K| 1280lm| 25| 80| 1170x22x32
5577,5578,5579| 20W| 6000K/4000K/2700K| 1600lm| 20| 100| 1470x22x32

What is in the box.

What is in the box

2/ The main LED unit – 1 piece.
3/ Power supply cable 1 piece.
4/ Connecting cable – (optional)*
– SKU: 6628 – 30 cm
– SKU: 6629 – 50 cm
– SKU: 6630 – 100 cm
4. Rigid connector 1 piece.
5. Metal clips 2 pieces.
6. Screws 2 pieces.
7. Operation Manual 1piece.
8. Package box- 1 piece.

Installation and connecting the unit.

  • Open the box and check its contents.

  • Install the unit on the designated place using the metal clips as shown on picture .3-1.
    Installation and connecting the unit

  • Connect the power cable to the unit (Picture.3-2).
    Installation and connecting the unit

  • Connect the power cable to the mains 220 V.

  • Turn on the unit using the on/off switch which is on the body.

  • If necessary you may connect few units in line using the rigid connectors (picture 3-3) or the flexible connecting cable (Рicture. 3-4).
    Installation and connecting the unit
    Installation and connecting the unit

  • ATTENTION! The maximum units connected in-line together is shown in the table above.

Safety Precautions.

  • Installing the unit can only be undertaken by a qualified electrician. Serious injury/death or property damage may occur if otherwise.
  • Installing or servicing the unit can only be undertaken when the power is completely cut off.
  • Do not attempt to operate or service the unit if the body, plug in or cable are damaged..
  • Ensure that the unit is not dropped or damaged by a physical force.
  • In case the unit does not operate properly – stop using it immediately, disconnect it from the power supply and seek professional assistance.
  • Never install or maintain the unit if you are not a qualified electrician. Serious injury/death or property damage may occur if otherwise

Recycling.

  •   The unit does not contain any valuable or toxic substances that require special recycling. Recycling is made via regular methods.

Transporting and storing.

  • Any means of transport is allowed provided that the package is not exposed to the elements or damage risk.
  • Store only unpacked indoors with natural ventilation with air temperature below 20 C upto +40°С and relative humidity not higher then 90 % (if not condense is formed).

Warranty.

  • Warranty against manufacturing defect is 12 months from the purchase date.
  • If any anomaly occurs – please contact your authorized dealer. You may be required to provide a valid proof of purchase and deliver the unit to a customer service point.

ATTENTION! Warranty does not cover:

  • Damages made by mechanical force or use outside the normal design purposes;
  • Any case in which damage has been caused by not following the operating manual.
  • Any case in which the unit has been opened or tampered with by an unauthorized service agent.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals