Tribit BTS10 StormBox Micro Portable Wireless Speaker User Manual
- June 6, 2024
- Tribit
Table of Contents
Tribit BTS10 StormBox Micro Portable Wireless Speaker User Manual
Packing List
-
StormBox Micro
-
USB-C charging cable
-
User Manual
-
Warranty Card
Product Illustration
Charging
-
Connect this speaker to a 5V power outlet via the providing USB-C charging cable.
-
Battery Indicator
****|
Red indicator is flashing
|
Low battery
---|---|---
|
White indicator is flashing
|
Charging
|
All indicators turn off
|
Full charged
- Indicator Instruction
****|| | | |
---|---|---|---|---|---
0-30%
| 30-50%| 50-70%| 70-80%| 80-100%|
Full Charged
Button
Power On/Off
|
Short press
| Power on| |
Blue indicator is flashing
---|---|---|---|---
Short press
| Power off| All indicators turn off
Press and hold it for 8s| Reset|
Blue indicator is flashing
Bluetooth Connection
| Press and hold it for 2s| Enters pairing mode| | Blue indicator is flashing|
Pairing status
---|---|---|---|---|---
Press and hold itfor 10s| Factory reset| Bluetooth indicator is steadily on|
Successfully connected
The Stormbox Micro Speaker will automatically connect to the last paired device again if available. If it fails, the speaker will enter to pairing mode.
The speaker can remember up to 8 paired Bluetooth devices.
Better still, it can connect to 2 devices simultaneously at a time.
Conversion betwen 2 Connected Devices
- Pause the playback of the current device
- Play the audio file of the other device
Volume adjustment
−
|
Short press
| Decrease volume
---|---|---
Keep it pressed for seconds|
Continuously decrease volume
+
|
Short press
| Increase volume
Keep it pressed for seconds|
Continuously increase volume
Multifunctional Button (MFB)
Music Mode
| Short Press| Play/Pause
---|---|---
Double Press| Next Track
Press it for 3 rimes| Previous Track
Press and hold it for 1s| Activate Siri
Conversation Mode
| Short press| Answer/End phone call
Press and hold it for 1s| Reject phone call
Short press| Pause the current call and answer the incoming call
Short press| Switch between two phone calls
Party Mode
-
Make sure both two speakers are turned on.
-
Press and hold the Bluetooth button of two speakers for 5s simultaneously, and release the buttons after you hear a prompt sound. In this way, the speakers enter party mode.
Note: The function of party mode can be realized only when you have 2 Tribit Stormbox Micro Speakers.
Party Mode
-
Make sure both two speakers have entered party mode.
-
Short press the Bluetooth button on any of the two speakers. 3. Release the buttons when you hear the voice of Stereo Mode. One speaker will sound “Left” and the other will sound “Right”, and then the stereo mode is activated.
Note: The function of stereo mode can be realized only when you have 2 Tribit Stormbox Micro speakers.
Conversion between Party Mode and Stereo Mode
Short press the Bluetooth button on any of the two speakers.
Disable the Party Mode or Stereo Mode
Press and hold the Bluetooth button for 5s on any of the two speakers, then both will re-enter Bluetooth pairing mode.
Specifications
Bluetooth Version
|
5.0
---|---
Output Power
| 9W
Frequency|
70Hz – 20KHz
Battery Type
| 3.7V/ 2600mAh Lithium battery
Charging Time|
3.5 hours @5V / 1A
Dimensions
| 98.3 x 98.3 x 34.8 mm
Waterproof Grade|
IP67
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-able protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>