BOLIN Dante AV PTZ Camera Decoder User Guide

BOLIN Dante AV PTZ Camera Decoder

Items included in the camera box

Items included in the decoder bo

Note: The Dante AV Decoder is mandatory for Dante AV video output.

Optional Accessorie

Camera HDMI Output Setup

Item List

Connection Diagram

Resolution Configuration

Note: Power off the camera prior to changing dial settings. Resolution can also be changed via OSD menu once the camera is powered on. Camera will follow the latest configured resolution. Refer to the camera manual for further detail.

Power the Camera
When powering via both DC 12V and POE , DC 12V takes precedence. Using only one powering method to power the camera is highly recommended.

1. 1. Power Adaptor (DC 12V 4A) to power the camera.

2. When using POE , use IEEE802.3bt certified switch to power the camera.

Dante AV Camera Startup

Camera Control via IR Remote

NOTE: For detailed IR remote operation instruction, please refer to camera product manual.

Dante AV Video Output Setup

Item List

Install Dante Controller Software
Dante Controller Download URL:https://my.audinate.com/support/downloads /download-latest-dante-software?lang=zh-hans
Dante Controller Hardware Requirements:

• * CPU: Minimum of 1GHz processor

  • Storage: At least 512MB

  • Network Card: Ethernet connectivity port (1000 Mbps)
    Dante Controller OS Requirements:

  • Windows: Windows 7/8/10

  • Mac OSX: 10.13.6/ 10.14.6/ 10.15 Note: Does not support PPC

Connection Diagram

Note:

1. DHCP network configuration is recommended.
2. If network does not support DHCP, please manually configure IP details on the camera and decoder to match the same gateway.
3. Switch Requirement:
   • Nonblocking Layer 2
   • Green Ethernet must be OFF (Recommend not using Green Ethernet capable switches)
   • Use reputable “Managed” switches
   • Support QoS with strict priority and 4 queues
   • IGMP Snooping ON
   • Please refer to product manual at www.bolintechnology.com for IP configuration instructions

Power on the Decoder

Both DC12V and POE are workable, when powering the camera, DC 12V preferably

1. Power Adaptor (DC 12V 4A) to power the decoder.
2. When using POE ++ , use IEEE802.3bt certified switch to power this decoder

Dante AV Decoder Startup
Note: For Dante AV camera startup tips, please refer to its respective diagram.

Display Camera Video via Decoder

Camera Remote Control Setup

1. Connection Diagram

2. Camera VISCA Address, Communication Protocol, and Baud Rate Settings
   Note: The camera should be powered off prior to changing the DIP switch setting. When there are multiple DanteAV cameras involved, refer to the table above for unique VISCA address to each camera. Up to seven unique address can be assigned to cameras at any given time.

3. Subscribe RS-422 Channel on Dante Controller
   NOTE: Rs422 channel needs to be subscribed in the Dante controller for remote control. Please refer to the keyboard controller’s product manual for detail. You can also use the infrared remote control to remotely control the camera through the DanteAV decoder.For detailed IR remote operation instruction, please refer to camera product manual.

References

• Download Latest Dante Software | Audinate

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>