OPTONICA 9514 Wireless Charging Desk Clock Instruction Manual
- June 3, 2024
- OPTONICA
Table of Contents
9514 Wireless Charging Desk Clock
Instruction Manual
9514 Wireless Charging Desk Clock
OPTONICR Wireless Charging Desk Clock
Instruction Manual
- ON/OFF
- +VOL/NEXT
- MENU
- VOL/PREVIOUS
- Micro USB Input
- TIme Display
- Temperature Display
- Wireless Charging Pad
- Reset
WHAT’S INCLUDED
1 x Wireless Charger Clock
1 x USB to Mkro-USB charging cable
1 x Instruction Manual
TECH SPECIFICATIONS
Input power: SV/I .5A
Wireless Output: SV/I A SW
INSTRUCTIONS:
-
Press the ON/OFF button. LED display will display the Time and Temperature after warm-up.
-
Press to choose the desired mode (Time/Date/A1/A2/A3 – shown below). To choose a mode, long press & when the desired mode appears on the screen.
-
Press and hold Qo to enter the setting state, and to adjust the setting digit, press and hold the arrow buttons: advance or decrease the digit rapidly.
TIME
A. Setting range:
- Hour: 1-12 hours or 0-23 hours
- Minute:00-59 B. PM (evening) is indicated by an illuminated dot next to the time (left side).
DATE:
A. Setting range:
- Month: 1-12
- Dar 1-31
- Year: 2000-2099
B. Setting detail: If idle for 15 seconds, the settings menu will change to the chosen display mode:
- Op-1: Displays the Time
- Dp-2: Displays the Date
- Dp-3 Displays the Date for 15 seconds and then displays the Time
ALARM:
A. When the Alarm is set, an indicator light will illuminate next to the time
(right side).
B. When the Alarm sounds, press any button to silence. If the Alarm is not
silenced, it will turn off after 60 seconds and reset for the next day.
TEMPERATURE:
A. At start-up, the current temp is automatically detected and displayed. The
Default temp unit is Ot – SO’C (32W – 122’F). The temp will automatically
update every 60 seconds.
B. To switch to Fahrenheit/Calcium, press the down arrow button for 2 seconds.
C. The temperature will always display except for Power-save mode (ON).
POWER-SAVING:
Turn on/off the power-saving function by pressing the”DOWN button. (ON with
display odd and OFF shows —Sd).
Press twice to switch Standby or Power saving status.
EXTERNAL POWER-OFF PROTECTION:
If the power supply is interrupted, the clock function will keep time though
the LED display will turn off and buttons will be unresponsive. Once power is
restored, the time will resume appropriately.
SAFETY PRECAUTIONS
WARNING: When using this product, basic precautions should always be followed, including the following:
- Do not use it on an aircraft or In a hospital.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not expose the device to any moisture.
- Do not use the device in excess of its output rating. Overloaded outputs above the rating may result in a risk of fire or Injury.
- Do not use the device if damaged or modified. The damaged or modified device may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the device. Seek assistance from a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperature. Exposure to extreme heat may cause an explosion.
- Have servicing performed by a qualified repair person using only Identical replacement parts to ensure that the safety of the product is maintained.
- This device is not a toy.
- Do not overcharge your Phone. The unit may get hot with excessive use. Remove the Phone when it is fully charged. Never charge for more than 7 hours at a time.
“KEEP OUT OF REACH OF CHILDREN”
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
** MADE IN CHINA**
Documents / Resources
|
OPTONICA 9514 Wireless Charging Desk
Clock
[pdf] Instruction Manual
9514 Wireless Charging Desk Clock, 9514, Wireless Charging Desk Clock,
Charging Desk Clock, Desk Clock, Clock
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>