EUROM 365207 Kamin Vento 3 Swing Haard Ventilator Instruction Manual

365207 Kamin Vento 3 Swing Haard Ventilator
Instruction Manual

Thank you
Thank you very much for choosing a EUROM device. You have made a good choice! We hope you will be satisfied with its functioning. To get maximum profit from your product, it is important to read this manual attentively and totally before use and to understand what is written. Read especially the safety instructions: they are there to protect you and your environment. Keep the manual in a safe place for future reference. The store also the package: that is the best protection for your product in times of no-use. And if you at any time pass the appliance on, pass on the manual and package too.
We wish you a lot of fun with the Kamin Vento 3!
Eurom
Kokosstraat 20
8281 JC Genemuiden (NL)
info@eurom.nl
www.eurom.nl

This manual has complied with the utmost care. Nevertheless, we reserve the right to optimize this manual at any time and to adjust it technically. The image used may differ.

Symbol explanation

Hot! Do not touch!

Technical specifications

Safety recommendations

1. This device is only intended for household use.
2. Always ensure that the base is sturdy, flat, and horizontal.
3.  Check to ensure that the fan blades are secured correctly. If necessary, tighten them with an Allen key.
4. Never place the device on an unprotected surface when the feet are hot; it could damage the surface.
5.  Check to ensure the handle is upright before placing the device on the heater.
6. The device is not intended to be used by persons (including children) with limited physical, sensual or intellectual capacities, or a lack of experience or knowledge unless under the supervision and with the provision of suitable instructions regarding the correct use of the device by a person who is responsible for safety.
7.  Keep the device out of the reach of children and monitor closely when it is used by children or when it is near children or pets.
8. This device is not a toy.
9. Never leave a working device unattended.
10. Never try to cool the device down quickly by submerging in water, or similar. This will damage the fan.
11. Do not allow the device to fall as this could damage the printed circuit board or slats.
12.  Never put a finger, pen, or any other object between the blades of the functioning ventilator!
13. Keep hair, clothing, jewelry, and similar items out of the vicinity of the device.
14. Only move the device using the handle.
15. Prevent the device from falling or being knocked and do not expose it to draughts, in order to prevent damage.
16. This device works between temperatures of 65° and 300°C. Temperatures above 300°C could damage the device. Use a suitable thermometer to ensure that the temperature above the heater does not exceed 300°C.
17. The device gets hot when in use and could potentially cause burns. Always use the handle on the device to move it and never touch the foot of the heater fan.
18. The guarantee does not cover damage caused by overheating. This device should only be used for the purposes and in the manner set out in the instructions. All other uses could present a risk (fire, injury, damage, etc.) and will invalidate the guarantee and no liability will be taken by the supplier.

Description and working

1.  Handle
2. Cool frame
3. Fan blade
4. Socket screw
5. Base

Intended use

The heater fan is intended to be used on top of a free-standing heater with a normal surface temperature of 65–300°C, to save fuel and ensure that heat is distributed effectively throughout the room. The heater fan is ideal for rooms with unusual layouts or environments that are particularly cold or damp. The heater fan does not work on mains electricity or batteries; it uses the heat from the heater to activate the fan. The unique design of the fan ensures it is stable and functions quietly. Place the heater fan on top of the heater so that cool air is drawn across the cool frame. Do not place the heater fan in front of the heater or directly in front of the chimney; the cool frame will become too hot. If the surface temperature exceeds 300°C, place the fan on a part of the heater that is not quite as hot to prevent damaging the device. Use a thermometer that is suitable for very high temperatures. The foot is designed so that it tilts slightly when the temperature gets too high; this ensures there is less contact with the surface. It also prevents the fan from being damaged by high temperatures. This works up to a point but it is still important to ensure the temperature limit is not exceeded.

Cleaning and maintenance

• Let the fan cool down before cleaning it or carrying out maintenance.
• Clean the fan with a damp cloth. Do not use any abrasive or corrosive cleaning products that could damage the material. Do not submerge the fan in liquids!
• Let the fan dry out thoroughly before using it again.
• Store the fan at the end of the season in a safe, dry place that is not subject to extremes of temperature, preferably in its original packaging.

Disposal
At its end of life, discard the device according to the local laws and regulations, or deliver the device to your supplier.

EUROM
Kokosstraat 20
8281 JC Genemuiden
The Netherlands
info@eurom.nl
www.eurom.nl

Documents / Resources

| EUROM 365207 Kamin Vento 3 Swing Haard Ventilator [pdf] Instruction Manual
365207, Kamin Vento 3 Swing Haard Ventilator, Swing Haard Ventilator, Haard Ventilator, 365207, Ventilator
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>