Rollei 10012750 Actioncam 9S Plus Camera User Manual

Actioncam 9S Plus Camera
10012750
User Manual
www.rollei.de 

Before the First Use

Read the operating instructions and the safety instructions carefully before using the device for the first time.
Keep the operating instructions together with the device for future use. If other people use this device, make this manual available to them. If you pass on the device to a third party, this manual belongs to the device and must be supplied with it.

Explanation of symbols

The following symbols are used in this manual, on the camera, or on the packaging.
Products marked with this symbol comply with all relevant community regulations of the
European Economic Area.
**** Products marked with this symbol are operated with direct current.

What‘s in the Box

1x Rollei Actioncam 9s Plus
1x Remote control 2 .4 GHz
1x Underwater protective housing
1x Exchangeable lithium-ion battery
1x Bike mount
7x Brackets
1x Helmet holder| 4x Velcro straps
2x Adhesive stickers
4x Cable ties
1x Metal cable
1x Micro-USB cable
1x Lens cleaning cloth
1x User manual
---|---

Attention

1. This product is a delicate product, do not drop or hit it anywhere.
2. Do not place the camera near to strong magnetism, such as magnets and motors. Avoid placing the product near anything emitting strong radio waves, a strong magnetic field may cause the product to malfunction or damage the image and sound.
3. Do not place the camera at high temperatures or in direct sunlight.
4. Use brand microSD memory cards as ordinary cards do not guarantee proper use.
5.  Da does not use microSD memory cards in or near magnetic places to avoid loss of data.
6. During the charging process, if there is overheating, smoke or odor, unplug the power immediately and stop charging to avoid fire.
7. Keep away the camera and its accessories from children to avoid choking or electric shocks.
8. Store the product in a cool and dry place.
9. Da does not use the camera when it is low power or in charge.
10.  Do not attempt to open or modify the camera housing in any way as this will invalidate the warranty.

Technical Data

2 .7K 2704 x 1520 at 30 fps
1080p 1920 x 1080 at 120/60/30 fps
720p 1280 x 720 at 240/120/60 fps
Still image resolution| 20 M: 5120 x 3840 4:3
16 M: 4640 x 3480 4:3
14 M*: 4320 x 3240 4:3
10 M: 3648 x 2736 4:3
8 M: 3264 x 2448 4:3
5 M: 2592 x 1944 4:3
2 M: 1600 x 1200 4:3
Display| 2“ touchscreen display and 1 .4“ selfie display
Data format| Video: MOV (H .264) I Photo: JPG
Memory| microSD memory card up to 64 GB
Connectors| Micro-USB, Micro HDMI, 1/4“ thread
Waterproofing| The camera body is waterproof up to 7 meters and in an underwater housing waterproof up to 30 meters
Microphone| Built-in microphone
Additional Features| White balance, webcam function, electronic image stabilization
Modes| Video: Normal, Slow Motion, Loop Recording, Time Lapse, Fast Motion Photo: Single shots, Continuous shots, Self-timer, Time-lapse, Long time exposure
---|---
WiFi| IEEE 802 .11 / b / g / n 2 .4 GHz
Max. transmission power| 10 dBm
Battery life| Up to 85 min. at 4K resolution
Power| Li-Ion battery 3 .7 V / 1,000 mAh / 3 .7 Wh
Input| DC 5 V ****2 A
Operating temperature| -10° – 60° C
Size | Weight| 6 .55 x 4 .38 x 2 .65 cm | 129 g / 109 g (incl . / excl . battery)
Box content| 1x Rollei Actioncam 9s Plus, 1x remote control 2 .4 GHz, 1x underwater protective housing for depths of up to 30 m, 1x exchangeable lithium-ion battery, 1x bike mount, 7x brackets, 1x helmet holder, 4x Velcro straps, 2x adhesive stickers, 4x cable ties, 1x metal cable, 1x micro-USB cable, 1x lens cleaning cloth, 1x user manual

Technical details are subject to change without notice. Misprints and errors excepted. Reproduction of these operating instructions – even in part – is not permitted. *interpolated

Components

1.Selfie / front display
2. Lens
3.0Built-in speaker
4. Micro-HDMI slot
5. Micro-USB slot
6. 1/4“ tripod connection
7. Battery compartment and microSD slot| 8. Mode button
9. Built-in microphone
10 Shutter / select button
11. Power / WiFi button
12. Operation indicator
13. Charging indicator
14. Touch display screen
---|---

Waterproof Case

• Insert the Camera into Waterproof Case
  1 . Ensure the case is clean.
  2 . Insert the camera and make sure the lens fits neatly in the lens cavity.
  3 . Close the locking clamps.
  4 . The camera can be mounted using the accessories provided.

Battery

Before using the device for the first time, you must fully charge the battery.

• Charging the Battery
  1 . Connect the camera to a computer or USB power supply (DC 5V 2A).
  2 . The charging status light turns on while the battery is charging.
  3 . The charging status light turns off when the battery is fully charged.

Changing the Battery

1. Hold the camera so that you can see the camera display and slide the battery cover to the right to open the battery compartment.
2.  Remove the battery.
3.  insert the new battery so the contacts line up with those of the camera.

Note: Operation is also possible while charging (e . g . via a power bank).

Getting Started

•  Turn On: Press and hold the power / WiFi button for 3 seconds. When the camera is turned on, the Operation Indicator turns on.
• Turn Off: Press and hold the power / WiFi button for 3 seconds.

Modes of the Camera

The Rollei 9s Plus offers various photo and video modes. In the following, we give you a short explanation of how they work. On the following pages, you can find detailed descriptions of how to change the settings for each mode.

• “Normal” video mode: You can record a single video at normal speed.
• “Seamless” video mode: Here you can record in a loop. The loop recording can be set in an interval of 1 or 5 minutes. After this interval, a new recording is made and saved in each case. If the memory card is full, the recordings made so far will be overwritten.
• “V-Timelapse” video mode: In timelapse video mode the camera takes pictures every 0 .5 seconds up to every minute and creates a video out of that. You can choose the video length from 5 minutes up to 30 minutes or endless.
• “SlowMotion” video mode: The camera records a sequence and replays it in slow-motion.
• “FastMotion” video mode: Here the camera replays the video faster than recorded, from double time up to 15 times faster. Compared to time-lapse video mode, these recordings are a little slower.
• “Single” photo mode: You can take a single shot.
• “Burst” photo mode: This allows you to take 3 shots/1s, 7 shots/2s, 15 shots/4s, and 30 shots/8s.
• “P-Timelapse” photo mode: In timelapse photo mode the camera takes pictures every 0 .5 seconds up to every minute for 5 to 30 minutes or unlimited.
• “CountDown” photo mode: You can set a timer on 2 or 10 seconds delay.
• “LongExp” long exposure photo mode: It uses a long-duration shutter speed to sharply capture the stationary elements of images.
• Date Stamp: You can add a watermark to your pictures or videos, either with just the date or with the date and time.

Touch Function

You can use the rear touch screen to access the functions of the camera

• Swipe to the left or right to change between the video mode and the photo mode.
• In the video or photo mode, you can access the playback mode via the symbol in the left lower corner (1) and the settings with the symbol in the right lower corner (3). To access the mode menu, touch the lower middle part (2).
• Swipe up to access the mode menu of video and photo.
•  Swipe down to open shortcuts to lock and power off for quick operations.
• To unlock touch the display and swipe from left to right, following the arrows, or press the shutter / select button.

Button Function

Overview Menu
To get access to the mode menu, press the shutter / select button for 3 seconds. Cycle through the menu (see above) with the mode button, and confirm with the shutter / select button. Video Mode
Press the shutter / select button when power on to start recording.|
A red light on the screen will flash as well as the operation indicator while recording. Press the shutter / select button again to stop recording. Photo Mode
Press the shutter / select button to take a single picture.You can choose between video mode, photo mode, playback mode, and settings by pressing the mode button shortly. Access the playback mode or the camera settings by confirming with the shutter / select button.
Cycle through the settings with the power / WiFi button and confirm with the shutter / select button the requested options. Exit the menu with the mode button or by confirming the arrow back.

Settings

In the System Setting mode, you can enter the settings for the system and choose different parameters for the camera. Please observe that the parameters will be activated
depending on the chosen video/ photo mode.

Parameters for the camera in video mode:

• Video resolution: Here you can set the resolution of your recordings.

• Video Quality: You can set the video quality between low, medium, and high.

• Voice Record: When it is on, the sound is recorded, when it is off, recordings are without sound.

• EV: You can set the exposure compensation between -2 .0 (image becomes darker) and +2 .0 (image becomes brighter) by tapping on the display.

• Image Stabilization: With Image stabilization turned on, the video will be smoother.

•  Loop Record: Here you can take shots of the duration of the interval again and again and save them individually.

• Timelapse Interval: You can set different intervals to determine the speed of the time-lapse video.

• Timelapse Duration: You can determine the duration of your time-lapse recording here .

• Slow Motion Movie: You can turn this on or off. If this function is switched on, the playback of your recording depends on the resolution framerate.
  The higher this is (up to max . 120), the slower you can play back the video .

• Fast Motion Movie: This function describes the fast motion function, which gives you 2 to 15 times played back recording.

• Wind Noise Reduction: This function improves your sound recording in the video and suppresses ambient noise.

• Auto Low Light: In low light conditions, this function is useful for brightening your image.

•  Metering: Here you can set the image area on which the camera focuses, e .g . in the center (Center), at
  different points (Multi), or at one point (Spot).

•  Date Stamp: Here you can give your images a date stamp or a date and time stamp.

Parameters for the camera in photo mode:

• Photo Resolution: Here you can set the resolution of your pictures.
• ISO: The ISO value can be adjusted automatically or set manually between 100 and 3,200.
• EV: You can set the exposure compensation between -2 .0 (image becomes darker) and +2 .0 (image becomes brighter).
• Timelapse Interval: You can set different intervals to determine the speed of time-lapse shooting.
• Timelapse duration: You can determine the duration of your time-lapse recording here.
• Photo Burst: Here you can set how many series pictures you want to take in a one-time sequence.
• Delay Timer: This function describes the self-timer that you can set here.
• Long Exposure: Here you can set the extended exposure time of the photo.
• Metering: Here you can set the image area on which the camera focuses, e .g . in the center (Center), at different locations (Multi) or at one point (Spot).
• Date Stamp: Here you can give your photos a date stamp or a date and time stamp.

System settings:

• Power Frequency: Set the frequency of your ambient light to get the best results.
• Sounds: Here you can turn on and off the shutter sound, boot up sound, and key beep sound, and vary their volume.
• White Balance: Set different white balance settings for optimal recordings. There is also a white balance for underwater shots.
• Effects: Here you can apply various filters to your images.
• Distortion Calibration: Use this function to straighten out the distortion at the edge of the image caused by the wide-angle lens.
• Date & Time: Set the date and time here.
• Display Flip: This function rotates the display 180° to allow the camera to be operated upside down.
• Screen Saver: Set to turn off the display automatically after a certain time.
• Auto Power Off: Sets the camera to turn off automatically after a certain time.
• Power On Auto Record: This function automatically starts recording a video directly when the camera is turned on with the previously set settings.
• USB: Set whether the camera is recognized as a removable disk (MSDC – mass storage device class) or webcam (PCCAM) when connected to a PC via USB.
• Language: Change the language of the camera menu here.
• Format Card: Format your memory card here, e .g . after a firmware update.
• System: Here you will find the function to reset the camera to factory settings, as well as information on the firmware (system info) and your memory card (card info) .

Playback Video and Photo

In playback mode, you can preview the videos and photos taken.

• Playback Files on Camera: Make sure you selected the Video or Photo Playback menu on the camera. Press the corresponding symbol on the touchscreen or press the power / WiFi button to cycle the videos or photos, then press the shutter / select button to playback the videos.
• Delete Files on Camera: On the symbol for deleting files mark the requested file first by touch or by pressing the shutter/select button for a couple of seconds, then again shortly and again for a couple of seconds, then choose the deleting options with the mode button. Confirm by pressing the shutter / select button, choosing the yes or no option with the mode button, and confirming again with the shutter / select button.

Selfie Mode / Switch to the Front Display

To switch displays, press the mode button for 3 seconds.

Webcam Function

The Actioncam 9s Plus can also be used as a webcam. To do this, set the “USB” item in the settings menu to “PCCAM”, make sure you insert a microSD memory card, and then connect the camera to your PC via USB.
As a webcam, the camera has a full HD resolution of 1920 x 1080 p and a frame rate of 30 fps.
Note: Please note that you need a separate microphone for audio transmissions, as the internal microphone is not used for this function.
The compatibility of the camera as a webcam also depends on the program used.

Connection of an external Monitor

You can connect an external monitor via the micro HDMI port. You can use all resolutions of the camera as the resolution, as long as the monitor supports them.
Note: The camera does not support live online streaming.

Remote Control

You can operate the Actioncam remotely using the remote control supplied.
There are two triggers, one for photo mode (1) and one for video mode (2), which take a photo or start and stop recording a video.
Radio frequency of the remote control: 2 .412 – 2 .472 GHz; transmitting power: 10 dBm
Note: The remote control is not waterproof .

Storage / Micro Cards

This camera is compatible with up to 64 GB capacity microSD and microSDXC memory cards. You must use a microSD memory card with a U3 or V30 speed rating at least. We recommend using brand-name memory cards for maximum reliability in high vibration activities.
Please note:

• The memory card is not included in the standard package, you will need to buy an extra memory card.
• Please format the microSD and microSDXC memory cards on the camera before using it.
• Please restart the camera after formatting.
• Please insert the memory card in the correct way, otherwise, the card slot might get damaged.

WiFi Setting / Operation via App

You can connect the camera to your smartphone via the integrated WiFi function. Turn the camera on and swipe up on the touchscreen to turn on WiFi using the mode menu, or briefly press the power / WiFi button to activate WiFi. The camera‘s WiFi is activated, the power indicator blinks, and the WiFi information (network name and network password „1234567890“) appears on the camera‘s monitor. Then connect the camera to the smartphone by going to the WiFi settings of your smartphone, selecting the camera‘s network, and connecting it. Download the free app „8s/9s/11s Plus Actioncam“ (Android version) from the Google Play Store or the iOS version „Rollei 8s/9s/11s Plus Actioncam“ from the App Store and install it on your smartphone . After installing it, open the app and select the camera network from the list. You will see the camera
on the screen of your phone. To exit WiFi mode press the power / WiFi button shortly.

WiFi Setting / Operation via App

Here you can download the app:

|
---|---
https://www.rollei.de/app/appstore/actioncam9splus| https://www.rollei.de/app/googleplaystore/actioncam9splus

Firmware Updates

Our cameras are delivered with the latest firmware by default. If a firmware update is required for your device, you will find it in the download center at downloads . rollei.com.

Disposal

Dispose of the packaging according to its type. Use the local possibilities for collecting paper, cardboard, and other materials (applicable in the European Union and other European countries with systems for the separate collection of recyclable materials).
Devices that are marked with this symbol must not be disposed of with household waste!
You are legally obliged to dispose of old devices separately from to dispose of household waste . Information on collection points that accept old appliances free of charge can be obtained from your local authority or town council.
Batteries and rechargeable accumulators must not be disposed of in household waste!
As a consumer, you are legally obliged to dispose of all batteries and accumulators, whether they contain harmful substances* or not, to be disposed of in an environmentally sound manner . Accumulators and batteries are therefore marked with the symbol shown opposite. For more information, contact your dealer or contact return and collection points in your community.

*marked with: Cd = Cadmium, Hg = Mercury, Pb = Lead

Battery Warning

• Never dismantle, crush, or pierce the battery, or allow the battery to short-circuit. Do does not expose the battery in a high-temperature environment, if the battery leaks or bulges, stop continuing to use.
• Always charge using the designated charger. Risk of explosion if the battery is replaced by an incorrect type.
• Keep the battery out of reach of children.
• Batteries may explode if exposed to naked fire. Never dispose of batteries in a fire.
• Follow your local regulations for disposing of used batteries.
•  Before disposing of the device, remove the battery.

Safety instructions

Hazards for children and persons with reduced physical, sensory or mental abilities (e.g. partially disabled, older persons with reduced physical and mental abilities) or lack of experience and knowledge (e.g. older children).

• This product can be used by children aged 14 and over. Cleaning and user maintenance must not be carried out by children without supervision.
• The packaging material is not a toy. Do not let children play with the packaging material. They can get caught in it and suffocate while playing.
• Supervise children to ensure that they do not play with small parts (screws, plugs, memory cards, batteries/rechargeable batteries). If you suspect that a small part has been swallowed, consult a doctor immediately.
• Store small parts so that they are inaccessible to children and animals.

CAUTION! Risk of injury!
Improper handling of the product can lead to injuries.

• Remove the battery and, if necessary, the charging cable immediately if there are unusual noises or smells, or smoke from the housing.

NOTE! Risk of damage to property!
Improper handling of the product can lead to damage.

• Never place the device on or near hot surfaces (e .g . hotplates etc .) or open fire. Never expose the device to excessive temperatures (heating, etc .).
• Never pour liquid into the unit.
• Never use a steam cleaner for cleaning.
• Do not use the unit if the plastic or metal parts of the unit have cracks or crazing or have become deformed.
• Handle the device with care . Impacts fall, or knocks can damage the device.
• Remove the battery if you are not going to use the product for a long period of time to prevent damage from a leaking battery.
• Only use the product in a temperature range between -10°C and +60°C. The product is suitable for use in a tropical climate.
• Do not modify the product.
• Never open the casing, leave the repair to qualified personnel. Contact a specialist workshop for this purpose. Liability and warranty claims are excluded in the event of repairs carried out independently, improper connection, or incorrect operation.
• Do not operate the unit if it shows visible damage or defects.
• When not using the unit, clean it or if a fault occurs, always switch off the unit, remove the battery and disconnect all connections.
• If the product has problems due to static discharge, switch the device off and then switch it on again after about 10 seconds.

Conformity

****The Rollei GmbH & Co . KG herewith declares, that the radio system type “Rollei Actioncam 9s Plus“ complies with the directive 2014/53/EU.
The complete text of the EU Declaration of Conformity can be downloaded at the following Internet address: www.rollei.com/egg/ac9splus
Rollei GmbH & Co . KG
In de Tarpen 4, D-22848 Norderstedt
Germany

Rollei GmbH & Co. KG
In de Tarpon 42 22848 Norderstedt
Service-Hotline: +49 40 270750270
/rollei.foto.de
@rollei_de
Item No.: 40329
www.rollei.com

References

• cewe - best in print
• Rollei ? Online shop for camera, video and photo equipment
• Rollei: Der Online-Shop für Kamera- Video- und Foto-Equipment – Rollei

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>