Rollei Fotostativ T2 Aluminium Black Photo Tripod T2 User Guide

June 3, 2024
Rollei

User Guide
Fotostativ T2 Aluminium Black
Photo Tripod T2 Aluminium Black

Rollei logo

Rollei Fotostativ T2 Aluminium Black Photo Tripod T2
01

1. Tripod Parts
  1. Quick release plate
  2. Tripod leg
  3. Center column
  4. Angle adjustment
  5. Removable rubber feet
  6. Hook
  7. Leg locking mechanism
  8. 1/4“ adapter screw
  9. Bubble level
  10. Quick release locking knob
  11. Ball
  12. Ball locking knob
  13. Panning scale
  14. Panning locking knob
2. Adjust the Tripod Height

As shown in the picture 2 rotate the leg locking mechanism clockwise by a rotation of 1/4 to open it. Then pull out the leg to the desired length and tighten the leg lock again.

3. Leg Angle Adjustment

The legs of this tripod can be adjused in three different angles (high, middle and low) as it has three lock-in positions. To adjust the angle move the leg a bit in the direction of the center column. Then you are able to release the angle adstument button, keep it pressed and move the leg up or down in the desired angle.

Rollei Fotostativ T2 Aluminium Black Photo Tripod T2
04

4. Adjustment of the Center Column

Open the center column lock by rotating it anti-clockwise. Then you are able to move the center column up and down. Lock it by turning the center column lock clockwise in the position needed. We recommend not to fully extend the center column as the tripod will loose stability in that case.

5. Folded Length

To store the tripod inside the bag or anywhere else retract the legs to its lowest position. Then press the angle adjustment button down and keep it pressed (a) and at the same time move up the leg so that the end of it is next to the top part of the center column (b).

6. Monopod Function

You can remove one leg to build a monopod. Therefore remove the center column as well as the leg with the monopod function. Then screw the center column onto the unscrewed leg by using the accessory-screw.

Note:

  1. Do not overload the tripod.
  2. Always tighten the center column lock if you use the tripod.
  3. For your safety do not let the product touch any electric objects, high voltage equipment and superactive chemicals.
  4. Only use standard lubricant when necessary.
  5. If used in wet, sandy or dusty environment, clean it carefully and let it dry completely.

Rollei GmbH & Co. KG
In de Tarpen 42
D-22848 Norderstedt

Service Hotline:
+49 40 270750270

@rollei_de
/rollei.foto.de

www. rollei.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals