XTUGA Burner Microphone Recording Wind Screen Installation Guide
- June 14, 2024
- XTUGA
Table of Contents
XTUGA Burner Microphone Recording WindScreen
BURNER
MICROPHONE RECORDING WINDSCREEN
DETAILED INSTALLATION STEPS
- As shown in the above figure, put a distributed nut onto the slot of each acoustic panel.
- Then all the acoustic panels are interlocked and inserted into the distributed hexagonal screws.
- At last, use the distributed hexagonal screwdriver to secure all screws, and then installation is completed.
INSTALLATION STEPS OF BRACKETS
- Assemble accessories of brackets according to the direction of the pointer.
- Bracket installation is completed.
- remove the screws at corresponding positions from the sound insulation board with trademark, and then fix the bracket.
Note: Please install the accessories on the soundproof board with LOGO.
THREE FOLDED ACOUSTIC BAFFLE COVER
( ACCESSORY LIST
Note : The No. 5/6/7 parts in the attachment list are all equipped with an extra one for standby to prevent the user from losing them during the installation process and failing to complete the product assembly.
FIVE FOLDED ACOUSTIC BAFFLE COVER
Note : The No. 5/6/7 parts in the attachment list are all equipped with an extra one for standby to prevent the user from losing them during the installation process and failing to complete the product assembly. Each acoustic panel has three layers of sound insulation material, which can make the sound recorded by the microphone cleaner. The foldable and removable structure design facilitates users to carry it to various complex environments to use it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>