Breeze Brite 208991 Light Socket Fan and Light Instruction Manual
- June 13, 2024
- Breeze Brite
Table of Contents
Breeze Brite 208991 Light Socket Fan and Light Instruction Manual
INSTRUCTION MANUAL
TECHNICAL SPECIFICATIONS:
gnestsp Flerel e & AC 120V Power : 25W __ Distributed by: CCT – Color Temperature : 6000K EPBFK Faifild, NJ 07004 60HZ E26 Lumens : 2100
HOW TO INSTALL:
No tools required, simply screw Breeze Brite into any light socket and use the included remote to turn on the light or fan.
HoW TO USE REMOTE CONTROL:
Important Remove plastic film and battery tab before use
For Light Control: 0n/Off – Press to turn the Light On and Off L – The light
will be in Low Luminosity M – Medium Luminosity H – High Luminosity
For Fan Control: On/Off – Press to turn the Fan On and Off L – The Fan will be
in Lowest Speed
M – Medium Speed H – Highest Speed
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
- Consult the dealer or an experienced radio/TV technician for help.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>