Rollei 28585 Lumis Bi-Color Ring Light for the Desk User Guide

Rollei 28585 Lumis Bi-Color Ring Light for the Desk

Before the First Use

Before using the device for the first time, read the operating instructions and the safety instructions carefully. Keep the operating instructions together with the device for later use. If other people use this device, please make these instructions available to them. If you pass the device on to third parties, these instructions belong to the device and must be supplied with it.

Intended Use
This unit is designed for use as photo and video lighting only. It must not be used for other purposes and in particular not for domestic room lighting.

Explanation of Symbols

The following symbols are used in this manual, on the flash, Rollei LUMIS Comfort Ring Light Bi-Color unit or on the packaging.

• Products marked with this symbol comply with all relevant community regulations of the European Economic Area.
• Products marked with this symbol are operated with direct current.

Safety Instructions

1. Only connect the product if the mains voltage of the USB input on the computer or USB power supply matches the information on the type plate on the back of the product.
2. Do not use the product if it is visibly damaged or if the cable is defective.
3. If the product or the accessories are damaged, they must be replaced or repaired by the manufacturer, its customer service or a similarly qualified person in order to avoid hazards.
4. The housing must not be opened and repairs may only be carried out by a specialist. To do this, contact a specialist workshop. In the event of repairs by the user, improper connection or incorrect operation, any liability and warranty claims are excluded.
5. Do not insert any objects into the product.
6. Do not leave the product unattended during operation.
7. Protect the product from moisture. Do not touch it with wet / damp hands and do not immerse it in water.
8. This product is not waterproof! Do not use this product in the rain or in wet areas.
9. Do not use or store the device at high or low temperatures or in closed rooms with direct sunlight. The product should not be used at ambient temperatures of more than 50°C or below -10°C.
10. Provide adequate ventilation during operation. Never cover the device.
11. Do not point the switched on product at drivers of cars, buses, bicycles, motorcyclists, or train drivers while driving. The driver can be blinded and cause an accident. This also applies to persons or groups not listed if an accident could be caused by possible glare.
12. Do not point the switched on product directly into the eyes of people or animals, as this can damage the retina, impair vision and even lead to blindness.
13. The device is not a toy. Keep the device, accessories and packaging materials away from children and pets to prevent accidents and suffocation.

Note: For lighting for video purposes only. Not suitable for permanent room lighting.

What‘s in the Box

• Ring light with coldshoe adapter
• Fixed cable (1.9 m) with remote control
• Tripod – Smartphone holder
• Remote control for smartphone
• User Manual – CR2032 Battery

Components

1. Ring light

2. Smartphone holder

3. Cold shoe connection with 1/4“ thread

4. Tilt adjustment

5. Adjustment clamps

6. Tripod

7. Tripod leg locking screw
   Remote control on cable

8. Brightness control

9. Adjustment of color temperature

10. On / off switch
    *Bluetooth® remote control**

11. For iOS smartphones

12. For Android smartphones

Setting Up

• Turn the tripod leg locking screw [7] to unfold the legs of the Tripod [6]. To fix, turn the tripod leg locking screw [7] in the opposite direction when you have moved the legs of the tripod to the desired position.
• Mount the ring light [1] on the 1/4 inch screw of the tripod plate at the upper end of the tripod [6].
• Then adjust the Rollei LUMIS Comfort Ring Light BiColor to the desired height by opening the adjustment clamps [5] on the tripod [6] and pulling the tripod to the desired height. Then close the adjustment clamps [5].
• Now fasten the smartphone holder [2] in the ring light [1] by screwing the holder into the 1/4 inch thread inside the cold shoe connection [3] of the ring light [1].
• Connect the Rollei LUMIS Comfort Ring Light Bi-Color via the USB-A connection to your computer or to a power supply unit with USB-A connection (not included in the scope of delivery; required output of the power supply unit: 5 V 2 A).

Note on the Operation
Please use USB power supplies with an output of 5 V 2 A (not included) to operate the Rollei LUMIS Comfort Ring Light Bi-Color. With other USB power supplies or USB outputs on other devices (e.g. computers, laptops), error messages or automatic shutdown of the Rollei LUMIS Comfort Ring Light Bi-Color may occur due to a deviating voltage.

Operation

• After having set up the Rollei LUMIS Comfort Ring Light Bi-Color, you can switch the light on and off using the on / off switch [10] of the remote control on the cable of the Rollei LUMIS Comfort Ring Light Bi-Color.
• You can set the brightness in 10 steps using the arrow buttons for brightness control [8].
• You can choose between 3 color temperatures (3,200, 4,500 and 5,500 K) with the help of the mode button.

*Using the Bluetooth 23 ® Remote Control with your Smartphone**

• Activate Bluetooth® on your smartphone. Slide the switch on the Bluetooth® remote control to ”ON“. The indicator light on the Bluetooth®* remote control flashes blue.
• Connect your smartphone to the Bluetooth® remote control by selecting Bluetooth® remote control in the Bluetooth® settings on your smartphone. You can now trigger the camera of your smartphone via the Bluetooth® remote control.

The Bluetooth® word mark and logos are registered trademarks of the Bluetooth SIG, Inc. and any use of such marks by Rollei is under license. Other trademarks and trade names are the property of their respective owners.

Technical Data

Light panel

Tripod

Smartphone Holder

Remote Control

Box Content
Ring light, cable with remote control (1.9 m), smartphone holder, tripod, Bluetooth®* remote control, C2032 button battery, user manual

Incl. button battery. Subject to technical changes.

Disposal

Dispose of the packaging according to its type. Use the local possibilities for collecting paper, cardboard and other materials. (Applicable in the European Union and other European countries with systems for the separate collection of recyclable materials.)

Devices that are marked with this symbol must not be disposed of with household waste! You are legally obliged to dispose of old devices separately from to dispose of household waste. Information on collection points that accept old appliances free of charge can be obtained from your local authority or town council.

Batteries and rechargeable accumulators must not be disposed of in household waste! As a consumer you are legally obliged to dispose of all batteries and accumulators, whether they contain harmful substances* or not, to be disposed of in an environmentally sound manner. Accumulators and batteries are therefore marked with the symbol is shown opposite. For more information, contact your dealer or contact return and collection points in your community.
marked with: Cd = Cadmium, Hg = Mercury, Pb = Lead

Warning regarding the Battery

• Batteries can be life-threatening if swallowed. Therefore, keep the battery and remote control out of reach of small children. If the battery has been swallowed, seek immediate medical attention.
• Avoid contact of leaking battery fluid with skin, eyes and mucous membranes. In case of contact with battery fluid, immediately rinse the affected areas with plenty of clean water and seek medical attention immediately.
• Remove the battery from the remote control when it is used up or when you are not using the item for a longer period of time. This will prevent damage that may result from leakage.
• Do not expose the battery to extreme conditions, e.g. by storing it on a radiator or in direct sunlight. Increased risk of leakage!
• Observe the correct polarity (+/-) when changing the battery. An incorrectly inserted battery can damage the remote control.
• If necessary, clean battery and device contacts before inserting.
• WARNING! Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries may have been swallowed or are lodged in any part of your body, seek medical attention immediately

Conformity
Hereby the Rollei GmbH & Co. KG hereby declares that the radio system type ”LUMIS Comfort Ring Light Bi-Color“ is in conformity with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following Internet address: www.rollei.com/egk/lumiscomfortringlightbicolor Rollei GmbH & Co. KG, In de Tarpen 42, 22848 Norderstedt, Germany

Rollei GmbH & Co. KG
In de Tarpen 42
D-22848 Norderstedt
Service Hotline:
+49 40 270750277

www.rollei.com

References

• cewe - best in print
• Rollei ? Online shop for camera, video and photo equipment
• Rollei: Der Online-Shop für Kamera- Video- und Foto-Equipment – Rollei

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>