ARADA ARA023 Large Delta Fire Pit Instruction Manual
- June 3, 2024
- ARADA
Table of Contents
ARADA ARA023 Large Delta Fire Pit
COMPONENTS
ASSEMBLY ORDER
The Delta Fire Pit should only be assembled in the order shown below. Only slots with matching number of corner holes should be paired up.
CAUTION: FOR OUTDOOR USE ONLY.
DO NOT light fire pit on combustible surfaces such as wooden decking.
SEE OVERLEAF FOR HINTS ON ASSEMBLY AND DISASSEMBLY OF DELTA FIRE PIT
ARADA DELTA FIRE PIT
ASSEMBLY HINTS
- Align matching sides so they are at 90° to one-another. This will ensure that they smoothly slide together.
- Two of the sides have holes and notches for locking them together
- All pieces should slide together fully.
- There should be a rounded edge at each corner.
- With three sides assembled, place base and griddle pieces into the bottom of the pit…
DISASSEMBLY HINTS
The Delta Fire Pit can be dismantled for easier transport or storage. To
disassemble, take note of the advice below and simply reverse the order of
assembly
First, carefully dispose of any ashes, then turn the fire pit upside-down.
Look for a leg fin with the flame symbol in corner, grasp the handle on the
leg fin with your hand.
Pull the fin upwards and in direction of slot whilst applying downward force
along the top edge. The side will easily pull away.
CAUTION: DO NOT dismantle fire pit unless it has cooled and is safe to touch!
Be careful when disposing of hot ashes! Use designated bins where provided.