Deepano AITP04 Face Access Terminal User Guide
- June 5, 2024
- Deepano
Table of Contents
Face Access AITP04
Quick Start Guide (Web Operations)
HARDWARE INSTALLATION
Plug in the Power Supply and Network Cables
Plugin the RJ-45 Ethernet and power supply cables into the AITP04 unit and
power ON the AITP04 unit
Note: The other end of the power supply cable must be connected to the
power supply. The other end of the RJ-45 should be connected to a LAN-
connected router, bridge or switch.
Choose an AITP04 Mounting Option
A. Wall Mount (incl. in standard packaging)
B. Desktop Mount (incl. in standard packaging)
C. Gate Mount (incl. in custom packaging only)
2A Wall-mount the Face Access AITP04 Unit
| | Push all cables through the center hole of the provided AITP04 Wall Mount
Holder
---|---|---
| Fasten the AITP04 to the AITP04 Wall Mount Holder with the 4 screws
| Fix the provided wall bracket on the wall
| Attach the combined AITP04 & AITP04 Wall Mount Holder unit to the wall
bracket fixed to the wall
2B Desktop-mount the Face Access AITP04 Unit
| | Push all cables through the center hole of the provided AITP04 Desktop
Mount Holder
---|---|---
| Fasten the AITP04 to the AITP04 Desktop Mount Holder with the 4 screws
2C Gate-mount the Face Access AITP04 Unit
| | Push all cables through the center hole of the provided tilt bracket
---|---|---
| Attach the tilt bracket (with cables passing through it) to the AITP04
| 
| Attach the combined AITP04 and tilt bracket unit (with
cables passing through it) to the provided
pipe of the gate-mount using the 2 screws provided
---|---|---
SOFTWARE CONFIGURATION (Web)
-
Wait for Face Access AITP04 Unit’s I.P Address
After powering ON the AITP04 unit, wait till the assigned I.P address from the DHCP server shows on the bottom-right side of the AITP04 display screen.
-
Accessing the AITP04 Unit’s Device Settings (Any Web Browser)
Type in the AITP04’s I.P address and port number 8080
into the Internet Explorer Web browser of a Windows PC. Type in username
admin, password admin123, and click on log in. -
Viewing the Live Video Stream of a Face Access AITP04 Unit (Windows’ Internet Explorer Web Browser only)
Click on Preview to view the live video stream from a
Face Access AITP04 unit’s camera, choose the camera from the drop-down menu
from the bottom-right set of controls, and click the button. -
Accessing All AITP04 Unit’s Configuration Settings (Any Web Browser)
Click on Configuration to access the configuration settings menu. The
configuration settings menu can be found on the left-side pane. -
Configuring the AITP04 Unit’s Panel Display Settings
Click on Configuration → Algorithm → Panel Settings to
configure the panel U.Isettings as well as panel sound-picture settings for
stranger warning alerts -
Configuring the AITP04 Unit’s Body Temperature and Protective Face Mask Temperature Detection Settings
ClickonConfiguration→Algorithm→CaptureSettingstoconfiguretheBody Temperature and Protective Face Mask detection settings -
Adding the Users’ Data into the Face Database (Any Web Browser)
a) Click on Configuration → Face Database to add users’
data to the face database
b) Enter a user’s personal ID data, work ID data, contact data, personal ID certification data and work ID certification data
c) Click on Add Person
Upon successful addition of user data, the user’s record appears as shown
below –
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The distance between user and device should be no less than 20cm.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>