GENAI B1MAX Wireless Earphone User Manual

WIRELESS EARPHONE

USER MANUAL

1. Indicator light
2. Multi-function button
3. USB charging port
4. Ear cap
5. Microphone

OPERATION

• Power-on: Press MFB 2 seconds
• Pairing: Press MFB 5 seconds
• End phone call: Short press MFB 1 time
• Redial the last phone number: Double click MFB 1 time
• Pause/Play: Short press MFB 1 time
• Power-off Press MFB 3 seconds
• Answer phone call: Short press MFB 1 time
• Reject phone call: Double click MFB

Indicator

• Pairing: Blue and red lights flash alternatively
• Power-on: Blue light flash 3 times
• Standby: Blue light flash 1 time every 5 seconds
• Blue light is on when full charged
• Pairing success: Blue light flash slowly
• Power-off: Red light is on for 2 seconds
• Red light is on when in charging status

Connect with phone

1. Place earphone with phone within 1 meter, the closer the better;
2. Long press MFB until red and blue lights flash alternatively,in pairing status;
3. Turn on wireless function on the phone,search the earphone model,click to connect without any passwords,when successfully connect indicator will turns to blue light flashes.

Congratulations!Successfully connect,now you can listen music and dial

Multi-points connection

1. Long press earphone MFB until red and blue lights flash alternatively, in pairing status;
2. Turn on wireless function on the phone 1, search the earphone model, click to connect;
3. Turn off wireless function of phone 1, long press MFB to turn off earphone;
4. Long press earphone MFB until red and blue lights flash alternatively again, in pairing status;
5. Turn on wireless function on the phone 2,search the earphone model, click to connect;
6. Turn on wireless function of phone 1 to connect the earphone again.

Please keep earphone and phone 1/2 within 10 meters

Problems & Solution

1. Couldn’t search earphone model on your phone
Reasons:

1.1 Earphone in power-off status;
1.2 Something goes wrong with earphone procedure;
1.3 Something goes wrong with phone procedure.
Solution:
1.4 After power-off earphone,long press MFB until red and blue lights flash alternatively to active earphone’s pairing status;
1.5 Re-set earphone;
1.6 Reboot your phone,and erase all connect or pairing data on your phone.
Notes
1.7 When earphone under pairing status,please connect earphone with your phone within two minutes, otherwise it will automatically power-off;

Tips: Please use the charger which is below 1A, please disconnect AC power when full charged,please do not charge earphones with powerbanks.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>