Dongguan Genai PRO6 Earphones Bluetooth User Manual
- June 15, 2024
- Dongguan Genai
Table of Contents
PRO6 Earphones Bluetooth
User Manual
PRO6 Earphones Bluetooth
Take the headphones out of the battery compartment and automatically turn them
on Put it in the battery compartment and shut it down automatically.
Wireless headset (TWS) realizes wireless stereo, left and right sound channel
separation, HIFI sound effect, and left and, right ears have a complete
Bluetooth function, which can be used alone.
model numbec: Pro6
Bluetooth version: 5.0+EDR
tansmission distance: ≥ 10 meters
Call time: ≥ 3 hours
Headphone battery: 30mAH
Charging box batte: 200mAH
suona: φ 10
touch: Type-c
Pairingmethod: function declaration
Play / Pause: Click on it
Call / hang up Click on it
Callrefusetoreceive: it lasts for 2 seconds
Last song: -Double-click the left ear
Next song: Double-click the right ear
volume”+”: Triple-click R ear is “+”
volume“-”: Three-click L-ear is “-”
Enter siri: Long press to
Low power shutdown: Voltage is below 3.0V
mattersneed attention
- Please don’t treat this product violently, and don’t squeeze it with heavy objects. Stay away from hightemperature and humidity environment.
- Stay away from wifi, routers and high-frequency transmitter equipment, which will affect the local signal connection. resulting in the sound of the card broken and disconnected.
- Please use this product in an effective environment (8-10m), and there is no physical barrier (such as wall) between Bluetooth device and earphone.
FCC ID: 2A27V-PRO6
Note: This product can be used with any Bluetooth-enabled device.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules, These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirement, The
device can be used in portable exposure condition without restriction.