Genai XT-18 Ultrapods Pro True Wireless Earbuds User Guide
- June 2, 2024
- GENAI
Table of Contents
Genai XT-18 Ultrapods Pro True Wireless Earbuds
QUICK CONNECTION GUIDE
- Take out the left and right (L/R) earphones from the charging compartment, the ears will automatically turn on and connect, and the main headset ®
- Wil onto the pairing seal (the red and green light flashes alternately). open the mobile phone Wireless search, and click the main ear pair name to connect
PARAMETER CONFIGURATION
True Wireless stereo, left and right channel separation, HIFI sound Both the
left and right ears have a full Wireless headset function, which can be used
alone or in pairs
Dual Mode Wireless 5.0, Chip Jerry 6983, ultra-low power consumption
- Wireless transmission distance: 10 meters
- Listening to the song time: about 3-4 hours
- Call time: about 5 hours
- Standby time: about 300 hours
- Charge box charging: about 3 times
- Charging time: 1 hour
- Charging box charging time: 1 hour
- Battery capacity: 3.7V 30mAh
- Charge box battery capacity: 200mAh
- Headphone charging parameters: 5V 30mAh
- Built-in CVC6.0 noise cancellation technology
- Support protocol famIl: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D1.3
WIRELESS PAIRING
At the same time press and hold the two main headphones for 4 seconds to switch to the pairing state (the red and green light flashes alternately) and wait for about 5-10 seconds for the headset to be successfully paired. After the pairing is successful, the main headset (R) will automatically re-enter the pairing mode and the traffic lights will flash alternately. Open your phone’s Wireless search and click on the headset pairing name to pair it.
WIRELESS USE
- Answer the call: When there is an incoming call, click the main button to answer the call.
- End the call: During the call, click the main button to hang up and end the call
- Reject the call: When there is an incoming call, press and hold the main button for 1 second to reject the call.
- Mobile phone and headset audio switching: While in the call state, press and hold the main button for 1 second to switch back and forth between the handset and the earpiece.
- Music playback When the headset is connected to the mobile phone click the main button to play the mobile music;
- Music pause: When playing music, click the main button to pause playback
- Music up and down: Double-click on the previous song in the left ear)and double-click on the next song in the right ear ®.
- Chinese/English language switching: When the headset is turned onto the pairing state (the traffic lights flash alternately), double-click the main button to complete the language switching.
- The headset is used separately: press and hold the main button for about 5 seconds to enter the pairing mode, and the traffic lights flash alternately. the phone turns on the Wireless search, and click the headset pair name to connect
CHARGING BOX USE
Function 1: Charging
- When the power of the headset is low, the headset will be charged into the charging box and closed. The white light of the charging box will flash, and the red indicator light of the headset will be on, indicating that the charging boxes charging the earphone. After the battery is fully charged, the indicator light is off, After a while, the light Is off. The charging box indicator will also go out to sleep. (Note: When the charging box is charging the earphone or the external USB is charging the charging box, the charging box indicator will flash slowly.
- When the charging box is low, put it into the earphone, the charging box indicator will fash slowly, and the charging box should be charged at this time.
Function 2 : Storing headphones
When not in use, the headset can be recharged into the charging box and it
needs to be taken out when it is used, The headset will automatically turn on
and connect back to the mobile phone. At this time, the headset can be used
normally.
(Note: When the power of the headset is completely discharged, the charging box can charge the pair of headphones 2-3 times at the same time, if the earphone is not used for a long time, please charge the charging box before use The charging box will store the earphone for a long time. The battery inside the box will have a slow self-consumption and may be low.
PROMPT
- Please read the instruction manual carefully before using the product and keep it in a safe place
- For the first time, please fully charge this product first
- If the product is not used for a long time (more than 3 months) please charge it.
- Must choose the nationally Ccc-certified charger produced by regular manufacturers
- When the power of the headset is completely discharged. the charging box can charge 2-3 times of each pair of headphones at the same time. If theearphone is not used for a long time, please chargethe charging box and the earphone before use. The charging box will store the earphones for a long time.
The battery inside the box will have slow self-consumption and may have insufficient power.
WARNING
- Do not hit or squeeze the product
- Do not let the device get wet with the liquid
- Do not place the device in an environment where the temperature is too low or too high (below O’C or above 45C)
- Do not use the device during thunderstorms. Thunderstorms can cause the device to malfunction and increase the risk of electric shock
- Please avoid using the device indicator near the eyes of children or animals.
- Please stay away from WIFI routers and other Wireless devices to avoid interference with other products using 2.4GHZ signals.
- Please use this product within the effective distance (10munobstructed)
- This product is suitable for all mobile phones, laptops, tablets, and desktop computers with Wireless devices
- Do not charge the charging box with fast charging or flash charging! Please use the charger with a rated voltage of 5-5.5V or computer USB charging (when the voltage is higher than 6.5V, the charging box ! enters the automatic protection mode, Truncate high voltage input to prevent damage to internal components)
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.
This equipment complies with FCC’s RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna(s) must not be co-
located or in conjunction with any other antenna or transmitter.