Dongguan Genai Technology BluePods104 BLUEPODS Earphone Instruction Manual
- June 6, 2024
- Dongguan Genai Technology
Table of Contents
Dongguan Genai Technology BluePods104 BLUEPODS Earphone Instruction Manual
Overview
General Information:
- Wireless version: V5.1
- working frequency: 2.402GHz-2.480GHz
- Support Wireless profile: A2DP, AVRCP HSP, HFP
- Music time: About 4 hours (80% volume)
- Talk time: About 4 hours (80% volume)
- standby time: The headset is about 50 hours, and the charging case is about 240 hours of standby time
- Battery: Lithium battery-3.7V, 30mAh
- Charging time: About 2.5 hours
- Charging voltage: DC5V-1A
- Charging box capacity: 300mAh
Product function\features
- Wireless stereo: support to connect Wireless devices to play music
- Wireless call: support Wireless connection high-definition call
- Power reminder: Support power reminder
Key function operation
- Power on: open the charging box, the headset will automatically turn on
- Shut down: put the earphone into the charging box and close the lid
- Pairing mode: the headset automatically enters the pairing mode when turned on
- Pause/Play: click left or right ear
- Answer/hang up: click left ear or right ear
- Incoming call rejection: long press the left ear or right ear for 2 seconds
- Next song: Double-click the right ear
- Previous song: Double-click the left ear
- Volume level: Long press the left ear to increase the volume, long press the right ear to decrease the volume
Charging compartment indicator light
- Charging box cover opening/closing indicator light: green light for opening/closing cover
- The headset is placed in / removed from the charging box indicator light: the green light flashes once
- Charging indicator light for the charging box: plug in the charging cable to charge the charging box, the orange light is always on, and the orange light is off when it is fully charged
- Low battery reminder of the charging box: the orange light flashes when the battery is low
Wireless connection operation
- Please keep the Wireless headset and mobile phone (or other connected devices) within 1 meter, the closer the better.
- Open the charging box, the headset will automatically turn on and enter the pairing mode.
- Turn on the user’s mobile phone (or other Wireless device), Wireless function, and search or scan. At this time, the phone will search for all nearby Wireless devices, click on the connection corresponding to the Wireless model name, after successfully pairing and connecting, you can start the headset call, Listening to songs, etc.
Warnings and precautions when using the product
- Do not use abrasive cleaners to clean this product.
- Do not allow this product to heat up or close to a fire source, such as a cooking stove.
- Do not expose this product to direct sunlight for a long time.
- Do not dispose of this product in a fire to avoid explosion.
- Do not attempt to disassemble this product to make any modifications, as it does not contain any maintenance components.
- Do not use this product in the rain.
- If you do not plan to use this product for a long period of time, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>